PDA

View Full Version : Box Design



revots
02-11-2007, 11:27 AM
I have a 10" MT, no amp yet but it will be between 1800-2200 rms. I want it top firing and rear ported. It's for a 97 civic and max dimensions would be 42x15x16. Tuned to 32-34 htz.
i have LEAP but i can't figure out how to bend ports. I appreciate any help.

rpfuror
02-11-2007, 01:26 PM
umm.. I can figure it out for you... give me a link to the subs specs.

bluelceii
02-11-2007, 01:47 PM
umm.. I can figure it out for you... give me a link to the subs specs.

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4923

...

revots
02-11-2007, 02:08 PM
i don't know if it will make it easier but, i have a little room to expand with depth if needed, but would like to keep it to a minimum.

sxpimpin
02-11-2007, 04:18 PM
I'll design you a box just give me a second..

sxpimpin
02-11-2007, 04:26 PM
Well how about 13" tall by 24" wide by 16inches deep. Port 11.5inches by 2.5" by 24 inches deep.

Thats 2.1 cuft tuned to 33 hz

revots
02-11-2007, 04:29 PM
that would work but is 28.75" enough port area?

sxpimpin
02-11-2007, 04:41 PM
That was actually supposed to be a 2. I don't like using really long ports....

Its 23 inches of port. Which is perfectly fine for 2 cuft and one 10.

I used 74inches of port for 9cuft and two memphis mojo 15's and it was insane. No port noice either.

revots
02-11-2007, 04:43 PM
what was supposed to be a 2. port noise is what i'm woried about, would it be ok to open the port up to 3"

i answered my own question about the 2..

sxpimpin
02-11-2007, 05:23 PM
if the port is 3inches wide the tuning increases to 41hz

revots
02-11-2007, 05:28 PM
i get that, but not if you lengthen the port. if not 3" than i would at least like 2.5".Thanks for your patients.

sxpimpin
02-11-2007, 05:50 PM
Alright.
Here's a revised one to get the 11.5 by 2.5" port..
box= 13" tall 26" wide by 16" deep
port= 11.5" tall by 2.5" wide 28" deep
tuning is 34 hz and the box is still 2.1 cuft due to the added port size

sxpimpin
02-11-2007, 05:51 PM
btw Steve Meade did an install with two MT 12's and only used 2 4 inch ports..
That worked out good for the install he did-no port noise

azbass
02-11-2007, 05:53 PM
i have an 3600 wrms amp for sell if interested. pm me.

CBFryman2
02-11-2007, 05:55 PM
What is the coil config?

PS

Send me a boot leg copy of LEAP please.

revots
02-11-2007, 05:58 PM
What is the coil config?

PS

Send me a boot leg copy of LEAP please.

you got aim.....dual 1.7

revots
02-11-2007, 06:01 PM
Alright.
Here's a revised one to get the 11.5 by 2.5" port..
box= 13" tall 26" wide by 16" deep
port= 11.5" tall by 2.5" wide 28" deep
tuning is 34 hz and the box is still 2.1 cuft due to the added port size

that looks good to me. thanks alot

revots
02-11-2007, 06:04 PM
are these external or internal?

revots
02-11-2007, 06:07 PM
now i just need someone who's good with sketchup.

CBFryman2
02-11-2007, 06:10 PM
YGPM

I'll do your sketch up.

What is your amp budget? For the money I'm really impressed with Hifonics BXi2006D so far. I will be taking some measurements once I get it installed in the car it is ment for. :)

revots
02-11-2007, 06:12 PM
i'll have $350 soon. i was thinking about a MD2d maybe