PDA

View Full Version : Project Osix - Rear seat Idea ROOM . PLS HELP- Give IDEA .



osix
02-09-2007, 03:27 PM
Here is a few photo that i edited to give you some idea
Ok . first of all - The Car is a TA22 Classic 1973 Toyota celica
here my option idea
I wanna have some crazy or cool design - i will do something up . and also Would love to see if anyone have some wild idea :) Wicked idea - Prefer to be able to display amplifer , and so on . i have access to .
Aryclic , MDF , fiber glass ,
12" x 2 combo - or 10" x 2 combo or 8 " x 4 combo - show us creative
here some photo taken before the car is restore

http://i110.photobucket.com/albums/n102/uvlux/Sub/space4a.jpg

http://i110.photobucket.com/albums/n102/uvlux/Sub/space5.jpg

Here is a photo taken 2 month ago the rim had change and also the color had been repolish . now i am using a WATANABE 14" instead of the 16"
http://i110.photobucket.com/albums/n102/uvlux/Sub/rubyhome8.jpg
Idea open for - for all kinda deisgn ..feel free to try and be dare
SHOW ME how creative you are :) and thanks for help in advance

Flipx99
02-09-2007, 03:29 PM
Good job on the restoration.

My only real reccomendation is not to cut out that "x" than connects the two sides of the car. It makes the car squeak and groan excessively.

osix
02-09-2007, 04:06 PM
The rear Cross bar would not be remove , i almost forget the Fuel Tanks is Just behind that Crossbar - so is limited to the dimension i gave .

Thanks for the advice

jeepintn
02-09-2007, 05:40 PM
whats the deminsions between the inside of the wheel wells?

osix
02-10-2007, 04:51 AM
i Have added the inner width between the 2 wheel wall - if you have any question do feel free to ask .

and Thanks for taking interest :)

mike dressure
02-10-2007, 04:58 AM
what material is your preferance. mdf,fiberglass, etc. i know you said you have all of the above to work with but im just trying to start somewhere

osix
02-10-2007, 05:18 AM
The Type of Material i would Open for Any kinda - I Have 3 Celica - and would be Happy to do up at least 2 of it .. if there is really cool design :)
So you can Flex Your Creative idea to the MAx :)

SO Shower me with your creative - once selected i would do up a Worklog - and try my best to show as much photo as possible .

osix
02-10-2007, 06:01 AM
This is just one simple idea - i got . - is base on the Amp in the center . and allow one person to seat in the center . -
- chocie here is done by a mix of MDF backing and the front is Fiber glass .

http://i110.photobucket.com/albums/n102/uvlux/Sub/idea1.jpg
Might mount a range of tweeter to make it look like Bug eyes

http://i110.photobucket.com/albums/n102/uvlux/Sub/idea2.jpg
The black spot can be an option for more tweeter or Holes

PowerNaudio
02-10-2007, 09:35 AM
do you have the subs and amps selected yet? or are you going to make the componets fit the build?

osix
02-10-2007, 10:20 AM
I have a few AMP to play with , ranging from 1500rms 800 rms and i got a 150rms x 4ch .

- the SUb wise . is flexible . thinking of 10 " and 12 " option

1 pcs , 2 pcs , 3 pcs , 4 pcs . i am open to all idea . which ever LOOk nice and sound good .

so is design is very open to all kinda idea ..

osix
02-11-2007, 01:48 PM
I just check . my Option is
8" 400rms 800 watt max SUb ( up to 4 pcs )
10"500rms 1000wattmax sub ( 2 pcs )
i got a option 12" 800rms 1600watt max sub ( 1 pcs )

anyone got any creative idea to share ?