View Full Version : Pic of my trunk...looking for unique designs.

02-06-2007, 03:55 AM
Gonna be for a 12" BM and trying to save as much room as possible.

An idea I came up with is:
38" W (max)
33" D (max)
7" H (max) - This is from the bottom of my trunk to the top of the opening area.

Max internal height is around 17" or less.

Thinking it might be more like a "false floor" where the false floor is the entire box.

Hopefully you guys get the idea.

Oh and I rather go ported, don't want sealed.

Will pay a few bucks for a good design :)


02-06-2007, 04:07 AM
VW jetta ?

02-06-2007, 04:09 AM
Good eyes :) The trunks on these are amazingly huge compared to other cars I've seen...lol.

02-06-2007, 04:17 AM
Thanks :)
What I would do is remove the floor and try and go as deep as you can into the spare wheel well, since the enclosure will be on top of that you might as well rip out the spare, its useless now. I did this in a friends car and it only took up 4" of height in the trunk. Mind you, it was a 18 in a 4 cubic foot enclosure :p:

02-06-2007, 04:19 AM
If I went with that big of a box to look like a false floor, then yeah the spare would come out definitely...along with the flooring. But then again, I'm not sure what to do.

Only problem with using the spare wheel well is that, I can't go ported....or is there a way? If so, fill me in! :P

02-06-2007, 04:27 AM
I never looked under the floor so i couldnt tell you if it's possible.
If you seal it, the enclosure will be about 1/2 of what it needs ported.
Wasnt your main goal to keep it small ?

02-06-2007, 04:28 AM
Well....I would like to keep it small IF possible.

But if I can't have both..... BASS > trunk.