PDA

View Full Version : Need a 3d Visual and cutsheet please.



sniper007
02-05-2007, 02:30 AM
Box Measurements:

2 Side Boxes:
Top Peice: 18.5Wx8Dx13H
Bottom Peice: 18.5x12Dx13H

Mid Console:
Top Peice: 12Wx5.5Dx13H
Bottom Peice: 12Wx7Dx13H

This box is going into a GMC Sierra 01 Reg Cab, there for 2 12's. Hopefully u know what im doing here. And hopefully Some1 could provide a 3D Visual and possibly a cutsheet. Thank you for your time and effort.

Heres whatll look like in the end more or less but u get the idea.
http://images.andale.com/f2/120/111/12409370/2007/2/2/gmcdwnfireext.jpg

sniper007
02-05-2007, 03:18 AM
bump ftw

PV Audio
02-05-2007, 10:57 AM
Um....

~Magick_Man~
02-05-2007, 12:52 PM
i would help you out but i really cant understand what you are asking for.

~Magick_Man~

sniper007
02-05-2007, 01:29 PM
ok look, this box is going to be all connected in the end, since my truck is a reg cab the middle console gets in the way thats why the mid console is going to be smaller than the 2 boxes that are behind the driver and passenger seats.

Heres whatll look like in the end more or less but u get the idea.
http://images.andale.com/f2/120/111/12409370/2007/2/2/gmcdwnfireext.jpg

sniper007
02-05-2007, 01:34 PM
bump

sniper007
02-05-2007, 01:38 PM
bump.. ftw

sniper007
02-05-2007, 01:42 PM
bump

~Magick_Man~
02-05-2007, 02:01 PM
so something like this.

http://i65.photobucket.com/albums/h202/magick_man9579/sniper007.jpg

~Magick_Man~

sniper007
02-05-2007, 02:02 PM
exactly! is there a cutsheet for that bro please? hope im not asking for much.

dinty01
02-05-2007, 02:03 PM
yes thats what he is looking for, i know bc i was helping him with the dimensions for the box

PV Audio
02-05-2007, 02:04 PM
Inventor 10 eh?

:)

sniper007
02-05-2007, 02:04 PM
yes thats what he is looking for, i know bc i was helping him with the dimensions for the box

yup dinty is 1 knarly dude.

~Magick_Man~
02-05-2007, 02:06 PM
let me make sure i have the dimensions correct.
it is 13" tall 18.5" wide 12" deep at the bottom and 8" deep at the top
plus the center section

http://i65.photobucket.com/albums/h202/magick_man9579/sniper007-2.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/sniper007-3.jpg


~Magick_Man~

~Magick_Man~
02-05-2007, 02:07 PM
Inventor 10 eh?

:)

7 :crap:
10 runs like crap on my computer for some reason.
but i do have it.

~Magick_Man~

sniper007
02-05-2007, 02:08 PM
yes magic u got the demensions right

~Magick_Man~
02-05-2007, 02:10 PM
give me a little while and i will have some kind of cut sheet for you.

~Magick_Man~

sniper007
02-05-2007, 02:13 PM
ok sweet

PV Audio
02-05-2007, 02:15 PM
7 :crap:
10 runs like crap on my computer for some reason.
but i do have it.

~Magick_Man~It does need some resources to run properly :(

sniper007
02-05-2007, 02:15 PM
well i gotta jet right now ill be back in a hour or so, Thank you magic for helping me dude awesome job. Also dinty for taking time outta his day to explain a lot of things about my project.

~Magick_Man~
02-05-2007, 02:25 PM
i dont think i will have time to finish it right now.
i have to go to work.
so i will give you the two different angles the faces are on.
and you should be able to sit down with a piece of paper and figure out the pieces since you have the dimensions.

the faces that the subs mount on are on a 73 angle.
and the center console section is laid back on a 83.5 angle.
you should be able to get the cut list with that info.

but if not and nobody else has done it by the time i get off work i will finish it up for you.

~Magick_Man~

sniper007
02-05-2007, 05:33 PM
ok thks magic

sniper007
02-06-2007, 04:35 PM
bump no1 know how to get the cutsheet for my project?

bluelceii
02-07-2007, 11:48 AM
Are you wanting to build in seperate chambers like this

http://img406.imageshack.us/img406/6012/seperaterb3.th.jpg (http://img406.imageshack.us/my.php?image=seperaterb3.jpg)

or build it whole like this??

http://img176.imageshack.us/img176/6397/wholecv3.th.jpg (http://img176.imageshack.us/my.php?image=wholecv3.jpg)

btw, I ask because you can make small cuts like in the 1st pic and just screw the boxes together.... or like the second pic, you'd have to cut larger pieces for the top bottom and back all the way across.

sniper007
02-07-2007, 01:54 PM
the second 1 blue.

bluelceii
02-07-2007, 02:20 PM
alright give me a lil bit I've got to run somewhere but I'll either work on that tonight or sometime tomorrow.

edit: will you be able to figure out the angle cuts on your own??

sniper007
02-08-2007, 02:36 AM
blue, on the mid console i think u might have the demensions wrong cuz its depth is 5.5" by 7".

bluelceii
02-08-2007, 03:42 AM
blue, on the mid console i think u might have the demensions wrong cuz its depth is 5.5" by 7".

according to what you put and the changes you gave me in the pm, this one lines up to what you said.

http://img128.imageshack.us/img128/4959/boxlq4.th.jpg (http://img128.imageshack.us/my.php?image=boxlq4.jpg)

sniper007
02-08-2007, 01:56 PM
yup thats it. just need cutsheet is all, not that important but would be nice.

~Magick_Man~
02-11-2007, 03:36 AM
cutsheet is done, finally

http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/90b5f4bc.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/62172ca7.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/66f59fff.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/f0fb1627.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/7e87f142.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/14dbe956.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/3b26446d.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/25e59137.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/08872287.jpg
http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/aac77559.jpg

~Magick_Man~

~Magick_Man~
02-11-2007, 03:36 AM
and one last shot.

http://i65.photobucket.com/albums/h202/magick_man9579/Sniper007/e6638c42.jpg


~Magick_Man~