View Full Version : Need design experience with enclosure behind third row in GM SUVs
02-03-2007, 03:52 PM
Basically what I need is help designing an ecnlosure for a 2003 cadillac escalade. I would like to leave the third row in place and use the space back there. I have not chosen a subwoofer or enclosure but more than likely it will be sealed becasue I don't think theres a enough room to go ported. I would like to get 2 15 inch subwoofers maybe downfire the enclosure or 3 12 inch subwoofers. I already have all my amplifiers installed. I'm going to be using a Kicker ZX1500.1 which does 1,780 watts @ 2 ohms mono. Any help and recommendation is very appreciated, thank you.
02-03-2007, 03:55 PM
02-03-2007, 03:57 PM
In the process of measuring give me a few minutes thank you.
02-03-2007, 04:27 PM
The notch on the bottom is for the handles on the rear of the seats and I was guessine maybe a down firing enclosure would be best but I would leave it up to the professional on that. thank you for all your help and very much appreciated.
02-04-2007, 01:50 AM
hey man just gonna let you know right now that 15s back there is not happening but im in the process of putting two 12s n the exact same spot
02-04-2007, 03:15 AM
I did a real quick rough sketch and came up with this. its a 14" cutout and without spacers it looks like depth is about 8 inches. not sure that is enough for your application. only drew one cutout but you get the picture. http://img15.imgspot.com/u/07/34/04/box1170580868.JPG
02-04-2007, 09:50 AM
All this help is very much appreciated.....