PDA

View Full Version : Empty towers?



foreman
02-03-2007, 12:32 AM
Anyone know where i can get some empty towers? I picked up some sweet drivers a while back, but they need 2 cubes each to run well, and i can't find any empty, 2 way or blank towers to put them in....Without breaking the bank...Any ideas short or making them?

lilmaniac2
02-03-2007, 12:34 AM
build em :)

joetama
02-03-2007, 01:42 PM
Indeed....

There are too many variables in the speaker box to just use a pre-build one, unless you are going sealed.

Even then what pre-build boxes cost you can make a set of them and screw up 3 times and still be a head money....

foreman
02-03-2007, 02:09 PM
**** it! You guys are going to make me do this, arent you?:crap: Seriously, i want to, but i'm remodeling my kitchen right now and i'm impatient to hear these drivers i have....Yes, sealed is how i'll be running them......

joetama
02-03-2007, 02:14 PM
Parts Express pre-built boxes then......


What are your drivers too?

1loudsuv
02-03-2007, 03:33 PM
http://www.madisound.com/cgi-bin/index.cgi?exact_match=yes&product=MY&cart_id=%25%CArt_id%25%25


http://www.madisound.com/cgi-bin/index.cgi?exact_match=yes&product=WO&cart_id=%25%CArt_id%25%25

foreman
02-03-2007, 06:48 PM
I know, however----i need upwards of 56 liters per box, and those 38liter enclosure are $146 plush shipping a piece! I'll be going to Home Depot this weekend and see what i can come up with.......Unless there are people out there with blown drivers in their towers they don't need.......:up2somet:

1loudsuv
02-14-2007, 03:47 AM
cardboard box?

joetama
02-14-2007, 12:38 PM
Hhhahahahah....

I've made mock ups using cardboard boxes before.... But only when I could not access wood or tools.... :(

Relax
02-14-2007, 12:42 PM
I could make you a pair for cheap- shipping wouldn't be to bad either- I shiped all four of these for only 35:

http://img.photobucket.com/albums/v652/J_rock777/P4260071.jpg

Just a little bit of my work too.

joetama
02-14-2007, 12:58 PM
Nice.... Those should finish up very well....

foreman
02-14-2007, 07:54 PM
You have PM Sir......