PDA

View Full Version : anyone need 3d sketches?



mobeious
01-28-2007, 08:58 PM
anyone need 3d sketches?

icpurplepplalot
01-28-2007, 08:59 PM
for free?

lookitsjim23
01-28-2007, 09:01 PM
for free?

X2

mobeious
01-28-2007, 09:03 PM
yeps ,,, here we go again

icpurplepplalot
01-28-2007, 09:05 PM
could u draw this up for me?http://www.caraudio.com/forum/showthread.php?t=211009

icpurplepplalot
01-28-2007, 09:07 PM
i can give you all the dimensions of each board if you need it

mobeious
01-28-2007, 09:14 PM
icpurplepplalot

http://i7.photobucket.com/albums/y290/mobeious/Untitled-2.jpg

icpurplepplalot
01-28-2007, 09:17 PM
i see a red x

mobeious
01-28-2007, 09:18 PM
sorry

icpurplepplalot
01-28-2007, 09:20 PM
np man thanx

icpurplepplalot
01-28-2007, 09:21 PM
icpurplepplalot

http://i7.photobucket.com/albums/y290/mobeious/Untitled-2.jpg

man I beleive my 15'' mojo will look sexxy in this box :yumyum:

mobeious
01-28-2007, 10:04 PM
anyone else

baseballer1100
01-28-2007, 10:06 PM
Yes. ok 1 fi 15 inch btl 36x18x20 @ 33hz.

trevor87
01-28-2007, 10:08 PM
I need a sketch and cutsheet made for this if you dont mind.
http://i51.photobucket.com/albums/f374/trevor0711/box.gif

mobeious
01-28-2007, 10:11 PM
plans,cutsheets cost $$

trevor87
01-28-2007, 10:14 PM
i thought they were free i already designed the box just need a cutsheet or sketch like u made icpurpleppl

baseballer1100
01-28-2007, 10:14 PM
**** i knew i was pushing it. lol

PhatTonyDeMarco
01-28-2007, 10:14 PM
42" wide x 22" deep x 20" high

18" driver centered firing up, double baffle with the second baffle being a flush mount rather than the sub sitting on top of it

port is 40.5" wide x 3" tall, running along the bottom of the front of the enclosure

Let's see what ya got :)

mobeious
01-28-2007, 10:21 PM
baseballer
http://i7.photobucket.com/albums/y290/mobeious/Untitled-3.jpg

baseballer1100
01-28-2007, 10:22 PM
woot. thanks dude.

saywhat?
01-28-2007, 10:28 PM
http://i173.photobucket.com/albums/w43/layedout72/backhalf-6.jpg

nah.

mobeious
01-28-2007, 10:28 PM
phat tony
http://i7.photobucket.com/albums/y290/mobeious/Untitled2.jpg

baseballer1100
01-28-2007, 10:29 PM
Your the man.

trevor87
01-28-2007, 10:29 PM
i gave you the same thing everyone else gave you, my dimensions, and i get skipped on the free sketch? u could have done the sketch for me and not did the cutsheet, if that was the only free part, just confused here

mobeious
01-28-2007, 10:40 PM
trevor
http://i7.photobucket.com/albums/y290/mobeious/Untitled3.jpg

FiFdYnUtZ
01-28-2007, 11:10 PM
i need a sketch of a box for a 12" FI Q... 2.5 cubes with 36 sqin of port, tuned to 34hz. and it needs to fit in a grand prix trunk...dimensions would kick *** too! thanks!

cooper1513
01-28-2007, 11:17 PM
4.5 cubic ft tuned to 30htz, 15, sub firing up port on bottom firing to back

http://www.alphasonik.com/600%20Series%20Parameters.pdf

trevor87
01-29-2007, 01:32 AM
thanks sir

dvrmstrng
01-29-2007, 01:37 AM
i could really use one as well...sealed with an 18" cutout...dimensions are 40" wide, 19.5" tall and 12" deep....thanks man!!

nismos14
01-29-2007, 09:46 AM
33 (w) x 9 (d) x 13 (h) w/ 30 hz tune

mobeious
01-29-2007, 05:48 PM
ok guys i would love to do boxes for yall but i need maximum dimentions and what woofer its for and if u want it ported or sealed and what tunnin

nismos14 that is only 1.5 cubes u can do 1 8" ported in that

nismos14
01-29-2007, 05:57 PM
Um ok. Thanks anyways?

nismos14
01-29-2007, 05:58 PM
And I can do a 12 in that box, I'll get my sketch elsewhere :)

mobeious
01-29-2007, 06:18 PM
Ummmmm ok i get 1.57cubes from that i dont know of any 12" subs that play in .75-1cube ported

DaGh0st
01-29-2007, 06:46 PM
i can think of a few....



W27
H16.5
D20

Port 15x3 @ 36hz
(i hope that made sense)

mobeious
01-29-2007, 07:52 PM
again he wanted 30hz tunnin

mobeious
01-29-2007, 07:53 PM
daghost 15x3 port at 30hz = port length of 128"

nismos14
01-29-2007, 07:55 PM
Lawl, anyways it could work with an aeroport, 3 "

mobeious
01-29-2007, 08:01 PM
it would work with 3" aero

cooper1513
01-29-2007, 08:13 PM
35w x 22d x 15h tuned to 30htz for 1 15". can i get 4.25-4.5 cubes with those measurements. heres the sub specs http://www.alphasonik.com/600%20Series%20Parameters.pdf

thanks

mobeious
01-29-2007, 08:33 PM
cooper
http://i7.photobucket.com/albums/y290/mobeious/Untitled2-1.jpg

cooper1513
01-29-2007, 08:41 PM
could the port go on the bottom and the sub centered?

aaron7114
01-29-2007, 08:55 PM
Hey man could you please design me a box for two 12 inch rockford fosgate punch p2?

Its goin in the back of a extended cab ford ranger.

Here is the room I've got.

20" tall
15" deep
25" long

Wanting the sub and port facing up.
Would like it tuned somewhere in the 32-34hz range. Whichever works out best.

trevor87
01-30-2007, 06:19 PM
Hey ive been messin with sketchup and i made a design of my box but it just comes out as a 3d image. Mobeious how do you get yours to come out with the look of an actual piece of wood put together? Plz pm me if u have time

bizzy07
01-30-2007, 06:29 PM
when you lay down your rectangle pull it to 3/4 or what ever thickness you are using

trevor87
01-30-2007, 06:32 PM
ahh thanks i got it now man lol

FiFdYnUtZ
02-04-2007, 02:50 PM
could you sketch me up a box with these dimensions

3 ft wide, 18in tall...

for 2 type-r 12's on a v12 1000w amp

ported and tuned to 34hz...

do however many cubes you think will fit closest to them dimensions and will make them the loudest possible

thanks!!!

audiobahnuser18
02-04-2007, 03:53 PM
hey man can u make me this 3d sketch people are telling me this one is kinda off but i did not make it but here's the specs i got.http://i11.photobucket.com/albums/a192/audiobahnuser/VentedboxPlans3dsketchup.jpg

sniper007
02-05-2007, 01:22 AM
Box Measurements:

2 Side Boxes:
Top Peice: 18.5Wx8Dx13H
Bottom Peice: 18.5x12Dx13H

Mid Console:
Top Peice: 12Wx5.5Dx13H
Bottom Peice: 12Wx7Dx13H

this box is going into a GMC Sierra 01 Reg Cab, there for 2 12's. Hopefully u know what im doing here.

SLIM3001
02-05-2007, 03:39 PM
Hi m8 could you run me up this box please if you have the time ??

( spec sheet )
MDF 18MM
EXTERNAL BOX ( Height 16 inch x Width 34 inch x Depth 15 inch )
PORT ( Length 22.5 X Height 14.5 x Width 2.5 )
Tuned to 35.05 HZ and 3.077 cu'ft NET

Its for a 15 inch sub

Thank's

OH and please add CUT LIST for the port if you can thank's

SLIM3001
02-05-2007, 06:49 PM
Oh all so it's going to be sub and face both facing the same way so port and sub both on the same side. Thanks againe

bluelceii
02-05-2007, 06:53 PM
http://www.subwoofertools.com/forum/ported-box.asp?Ew=36&Eh=16&Dia=9&Xmax=27&Vd=0.19&NumW=1&Vb=4&Fb=33&Qts=&Vas=&Fs=&CE=0