PDA

View Full Version : hey



sniper007
01-25-2007, 10:56 PM
Can anybody design me an enclosure for my truck, there 2 12' Audiobahn AW1200Q Subwoofers. Ported would be awesome but if its not possible sealed would do ill just add polyfill at the end. The demensions are 58" width, 14" height, 9" depth.

Pics of my truck

http://img.photobucket.com/albums/v481/sniperior/DSC00235.jpg

http://img.photobucket.com/albums/v481/sniperior/DSC00237.jpg

http://img.photobucket.com/albums/v481/sniperior/DSC00238.jpg

As you can see the F**kin middle seat doesnt move so i gotta work past that and use what i got. All i want is the best box thats going make my 2 12's sound the best they can. Looking mostly for SPL.

sniper007
01-26-2007, 01:02 PM
bump - edited measurements

kickerlivinloud
01-26-2007, 01:56 PM
I highly doubt you will be able to port this enclosure. I did a quick calc and found you have 3.06ft^3 to work with That does not include sud displacement, so you would probably have around 2.7Ft^3 roughly. (I'm not sure exactly how much disp the bahns are). If you would like a setchup I will do one for ya, just let me know..




Jon

ultimate157
01-26-2007, 03:20 PM
Yea ... You're only going to be able to seal them. 3 cubes sealed is good for 2 12's.

Duke
01-26-2007, 03:22 PM
Those subs do good in 1.2-1.3 cubes each if you can manage to get it tuned to 35 hz. A single 4 inch port works well for those.

berserker
01-26-2007, 05:21 PM
Subs fire forward and ports fire sideways towards passenger side with two 4 inch ports 14.125 long each. The net volume is a little less than what Audiobling recommends, their space saver bass design, but is close to it.



box:


Vb: 2.32 Ft^3
Fb: 40 Hz
Av: 25.12 In^2
Lv: 14.125 In

3.065 gross
0.540 sub disp.
0.205 port disp.
_____
2.320 net


cut list:


top: 9 x 58
bottom: 9 x 58
baffle: 12.5 x 56.5
back: 12.5 x 56.5
l side: 9 x 12.5
r side: 9 x 12.5
ports (2): 4 x 14.125

Duke
01-26-2007, 06:01 PM
Subs fire forward and ports fire sideways towards passenger side with two 4 inch ports 14.125 long each. The net volume is a little less than what Audiobling recommends, their space saver bass design, but is close to it.



box:


Vb: 2.32 Ft^3
Fb: 40 Hz
Av: 25.12 In^2
Lv: 14.125 In

3.065 gross
0.540 sub disp.
0.205 port disp.
_____
2.320 net


cut list:


top: 9 x 58
bottom: 9 x 58
baffle: 12.5 x 56.5
back: 12.5 x 56.5
l side: 9 x 12.5
r side: 9 x 12.5
ports (2): 4 x 14.125

Sniper, do it and I think you'll like it.:)

sniper007
01-26-2007, 06:14 PM
hmm.... can any1 do a visual on how the box will more or less look like with that design?

Duke
01-26-2007, 06:29 PM
Would the ports have enough room to work correctly?

Duke
01-26-2007, 06:55 PM
How much space would be between the ports and the side of the vehicle?

sniper007
01-26-2007, 07:04 PM
umm... well the passengar seat is adjustable so i dont think itll be a problem.

sniper007
01-26-2007, 07:10 PM
unless thats not that question ur asking.

sniper007
01-26-2007, 07:38 PM
How much space would be between the ports and the side of the vehicle?

how much would be recommended?

sniper007
01-26-2007, 08:30 PM
bump

Duke
01-26-2007, 08:32 PM
Well, I'd have at least one diameter away from the nearest surface, so 4".

sniper007
01-26-2007, 08:40 PM
Well the max width is 60"s, so the measurement would be 54"s?

kickerlivinloud
01-26-2007, 10:07 PM
Here's a quick setch.... I used the original dimentions, and dual 4" ports

http://123pichosting.com/images/8377sniper.JPG


Its not much but gives you an idea...



Jon