PDA

View Full Version : Need Cutsheet Asap



trevor87
01-25-2007, 10:53 PM
got the box design, just need a cut sheet made for me so i can start cuttin and it will be ready when my port arrives. Went with a 4" aeroport. Its a reg cab truck box so its angled.

[IMG]http://i51.photobucket.com/albums/f374/trevor0711/box.gif

sniper007
01-25-2007, 11:01 PM
dude no need to make 2 posts about the same **** thing.

trevor87
01-25-2007, 11:06 PM
the first post was about getting my box designed, which is now done, i just edited it and added this info

I made this post for anyone who wants to make the cut sheet becasue some people may not know how to make designs thanks now gtfo

sniper007
01-25-2007, 11:08 PM
couldve of used the same thread u made ***

geowick07
01-25-2007, 11:19 PM
I will never understand why people ask for cutsheets. It is ONE of the most simple things to do. As long as you can read a tape measure, you can do this on your own. Tape measure, framing square, and a pencil. Get to it! People act like measuring is a job for a nuclear physicist.

trevor87
01-25-2007, 11:20 PM
You know if your not contributing to my cutsheet needs why bother posting?

troy_audi0
01-25-2007, 11:30 PM
Re Already has it on the web for you >>Box Design W/Cut Sheet<< (http://www.reaudio.com/speaker_box/LPort_Box_Calc.html)
Peace & Good Luck
Keep US Posted
Troy

trevor87
01-25-2007, 11:38 PM
That wont work im not using a square port.

troy_audi0
01-25-2007, 11:49 PM
That wont work im not using a square port.

Make the Port Size 0 on both
you will get your cut sheet for the box.. + Box Vol... ect ect
Peace Troy

troy_audi0
01-25-2007, 11:50 PM
put your box Vol. into this calc & you can get your port info..
>>The12Volt<< (http://www.the12volt.com/caraudio/boxcalcs.asp)
Peace Troy