PDA

View Full Version : Are this dimensions okay?



streakz
01-19-2003, 03:21 PM
Are these specifications okay?? It's a vented Trapezoid enclosure:

Height? = 20 Inches
Width? = 18 Inches
Depth1? = 6 Inches
Depth2? = 18 Inches
If the above dimensions are OUTSIDE dimensions, enter the thickness of the wood below.

Wood Thickness? = .5 Inches
Speaker Displacement? = 1 Ft³
Port Frequency? = 35 Hertz
Port Diameter? = 2 Inches
Number of Ports? = 1
Sq. Port Ratio H:W? = 1:


Data Output:
Box Front Angle = 59 Degrees
Gross box volume = 1.056 Ft3
Net box volume = 1.047 Ft3
Port Length = 5.102 Inches
Port Area = 3.142 Inches2
Port Volume = .009 Ft3


What should I change to improve it?

nswartley
01-19-2003, 03:22 PM
well dont use wood for sure. use 3/4 MDF (medium density fiberwood) what sub is this for? what amp?

violator5spd
01-19-2003, 03:23 PM
what sub(s) are you putting in there?