PDA

View Full Version : cut out hole?



haunther
01-17-2007, 11:30 PM
Ok so im makeing a box for my new xxx
11 1/8 is the cut out
but i dont have a box ring or anything to
go by how can i draw it on the box?

PhatTonyDeMarco
01-17-2007, 11:31 PM
Compass.....?

haunther
01-17-2007, 11:35 PM
i dont have one that big....

PhatTonyDeMarco
01-17-2007, 11:38 PM
i dont have one that big....
I have never seen a compass that didn't go up to at least a 6" radius...

If you aren't aware, you would set the compass to 5 9/16"; not 11 1/8".

j3bus2k3
01-17-2007, 11:38 PM
Take a piece of carboard, and draw your radius from the end to wherever it ends. poke a hole where your line ends so your pencil can get through; hold the end and spin the cardboard and voila...cheap-o compass

evan
01-18-2007, 12:27 AM
Draw an X from the four corners to get the center point.

haunther
01-18-2007, 12:56 AM
well im a tard thx guys.

Bumpn Focus
01-18-2007, 01:35 AM
Just free hand a circle, I'm sure it'll be close enough.


;)

google123
01-18-2007, 07:25 AM
place a basketball on there and then just trace around it that how i did it. thanks goodbye now.

haunther
01-18-2007, 04:10 PM
/\ Ftmfw~

ultimate157
01-18-2007, 05:53 PM
Draw an X from the four corners to get the center point.

werd

j3bus2k3
01-18-2007, 05:55 PM
Draw an X from the four corners to get the center point.

:fyi: That draws an 'X' not a ring to follow while their cutting out the hole :fyi: