PDA

View Full Version : 3 Subs...Any Ideas?



jace314
01-16-2007, 09:28 PM
Hey people!
I have 2 10" 1052 Infinity, and 1 12" P2 Rockford. I was wondering if any one could help me figure out a design for a box that I would like vented, and capable of fitting in my VW passat? I will have to measure the trunk for exacts, but I know its not that much space!

Im just trying to be able to use all 3 subs at the same time and not waste any of them! Or $! :crying:

Thanks All!

lookitsjim23
01-16-2007, 10:14 PM
bad idea...

jmanpc
01-16-2007, 10:17 PM
yes, don't mix subs.

jmanpc
01-16-2007, 10:18 PM
and why are you using the mbq refs as your rears and the discus as your fronts? :confused:

negativezeroz
01-16-2007, 10:18 PM
Rock the Infinity's, ditch the RF

:imo:

BASSMEKANIK
01-16-2007, 10:20 PM
dont be a tard/noob...

use the infinitys and sell the fosgate to some ******* stupid enough to buy it...

crazy4ozs
01-16-2007, 10:24 PM
agreed

scplayboy00
01-16-2007, 10:34 PM
Different subs =gay better componets in the back = stupid.

jace314
01-16-2007, 11:54 PM
OK! I will rock the infinitys! The better quarts will make there way to the front soon! I had the other ones in there allready, just havent got around to switching them. As for the infinitys, should I vent? I like the vented sound myself, but wasnt sure what people recomending with the infinitys?

jace314
01-16-2007, 11:56 PM
On a serious note...
Whats the deal with the RF? Not a prefered sub for you guys?

angrytrucker78
01-17-2007, 01:24 PM
http://i15.photobucket.com/albums/a374/angrytrucker78/xcmu9ho8NQ1etEGJTmElGDBjwTnf.jpg

jmanpc
01-17-2007, 01:26 PM
Yes, I'd vent the Infinitys. They ought to sing. And RF's subs are overpriced, overblinged and overhyped. They have sub-par SQ and little output.

jace314
01-17-2007, 07:39 PM
I would I be better off doing an enclosure that joins the 2 subs, or each having there own space and port? I was hoping to have the box hold both subs but have a piece of wood in the middle to split the box into 2 seperate chambers, and also having the ports in the middle, rather then left and right. Sound good? Whatcha think as far as tuning for them?

Thanks