PDA

View Full Version : fawd06 build 2-15"sx PICS



fawd06
01-15-2007, 11:34 PM
Started building my box for my 2-15sx yesterday!!! Its going to be 7 cubes after port and sub displacement tuned to 35!! special thanks to iamamp3pimp for the box plans!!!!!

fawd06
01-15-2007, 11:34 PM
pics are coming have to upload them!!!

mazdakid
01-15-2007, 11:36 PM
didnt you blow your subs or somethin? did you get them reconed or what

fawd06
01-15-2007, 11:36 PM
http://i72.photobucket.com/albums/i176/kenny7231/box001.jpg

2x4 bracing
http://i72.photobucket.com/albums/i176/kenny7231/box002.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box003.jpg

fawd06
01-15-2007, 11:38 PM
didnt you blow your subs or somethin? did you get them reconed or what

yeh reconed them!!!!

fawd06
01-15-2007, 11:40 PM
http://i72.photobucket.com/albums/i176/kenny7231/box006.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box008.jpg

pic of the port

http://i72.photobucket.com/albums/i176/kenny7231/box009.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box010.jpg

406er
01-15-2007, 11:41 PM
whats with the 2X4?? and wares the top and bottem

jj4475
01-15-2007, 11:42 PM
lol

jj4475
01-15-2007, 11:44 PM
is that board the bottom

fawd06
01-15-2007, 11:45 PM
http://i72.photobucket.com/albums/i176/kenny7231/box012.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box013.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box015.jpg

jj4475
01-15-2007, 11:46 PM
looks good

mazdakid
01-15-2007, 11:48 PM
might need bracing in the middle from top to bottom and from side to side

irnotfob
01-16-2007, 12:52 AM
looks like you got three hands workin on that box. haha i'm so jealous of your setup right now. wish i coudl fit 7 cubes in my trunk.

fawd06
01-16-2007, 01:20 AM
http://i72.photobucket.com/albums/i176/kenny7231/box017.jpg

double baffle going on!!!! LOOK AT ALL THAT GLUE LOL!!!

http://i72.photobucket.com/albums/i176/kenny7231/box018.jpg

fawd06
01-16-2007, 01:25 AM
Just a lil weight to hold the double baffle on before I screw and nail it on!!!

http://i72.photobucket.com/albums/i176/kenny7231/box020.jpg

Look finally lifted a finger hes so happy he put those weights on!!!

http://i72.photobucket.com/albums/i176/kenny7231/box019.jpg

jeeper07
01-16-2007, 01:32 AM
looks good. My questions are whats with the 2 by 4? and you might actually have too many screws. Once they get to be too close together it starts to weaken the box. Cuts look good and good design tho. Just two things i noticed!

fawd06
01-16-2007, 01:32 AM
http://i72.photobucket.com/albums/i176/kenny7231/box022.jpg

pic of the hatch area!!!

http://i72.photobucket.com/albums/i176/kenny7231/box023.jpg

fawd06
01-16-2007, 01:33 AM
Hope it fits!!!

http://i72.photobucket.com/albums/i176/kenny7231/box024.jpg

fawd06
01-16-2007, 01:34 AM
Box installed!!!

http://i72.photobucket.com/albums/i176/kenny7231/box025.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box026.jpg

fawd06
01-16-2007, 01:35 AM
looks good. My questions are whats with the 2 by 4? and you might actually have too many screws. Once they get to be too close together it starts to weaken the box. Cuts look good and good design tho. Just two things i noticed!

2x4 is for bracing!!!

fawd06
01-16-2007, 01:37 AM
All i have to do is cut the holes out for the subs!!!! Also, im thinking about putting some resin on it and doing the corners with resin too!!!!


TO BE CONTINUED!!!!! :)

acold7dusta
01-16-2007, 01:42 AM
"bah!!" lol

looks good but WAY too many screws.

kinda ***** you lost your rear seats too

cant wait to see the finished product

Wkbdkid
01-16-2007, 01:42 AM
Thats a lot of screws. Looks good so far:thumbsup:

fawd06
01-16-2007, 01:44 AM
yup over kill with screws i know!!! lol!!!

fawd06
01-16-2007, 01:45 AM
Thats a lot of screws. Looks good so far:thumbsup:

thanks

woody89
01-16-2007, 09:51 AM
Looks good. Looking foward to seeing the subs in. Get some vids if you can.

LeofromtheH
01-16-2007, 09:57 AM
!!!!!!why are you yelling!!

SHiZNiLTi
01-16-2007, 11:31 AM
That looks H U G E in that car. Nice build I like it.

JohnBlayz142
01-16-2007, 11:34 AM
Too many screws my ***, it won't affect anything.

acreature
01-16-2007, 11:49 AM
Too many screws my *** ......... Too many what screws your ***?



:laugh: j/k

saywhat?
01-16-2007, 11:52 AM
theres not too many screws really....hes screwing into a double baffle remember...

those 2x4's will do nothing IMO.

acreature
01-16-2007, 12:00 PM
those 2x4's will do nothing IMO.They add unneeded weight, they do.

ultimate157
01-16-2007, 12:21 PM
!!!!!!why are you yelling!!

lmfao.

Skip01
01-16-2007, 01:25 PM
Hope it fits!!!

http://i72.photobucket.com/albums/i176/kenny7231/box024.jpg

Dude...New Years passed already...pop that cork:laugh:

My God your a fagggggg:D

iamamp3pimp
01-16-2007, 02:11 PM
saywhat.......have you worked with 2x4's inside of a box?

if so, please elaborate on what you are saying.

if not, try it out.......it works.

o6blink
01-16-2007, 02:32 PM
holy **** that is huge.

mikey060
01-16-2007, 03:13 PM
!!!!!!why are you yelling!!

loud noises!!!!!

box looks goood!!!!!!@!@!#!@$!@$

screws!!!!!!

iamamp3pimp
01-16-2007, 05:35 PM
box does look good btw

mazdakid
01-16-2007, 05:36 PM
saywhat.......have you worked with 2x4's inside of a box?

if so, please elaborate on what you are saying.

if not, try it out.......it works.

they are only along the walls, not gonna help much

iamamp3pimp
01-16-2007, 06:16 PM
they are only along the walls, not gonna help much

itll help keep those walls from flexing.


top is double baffeled, and the bottom should be just fine.

try it for yourself, then tell me what you find.


i would have agreed with you, until i did it in the wall for the explorer.....

mazdakid
01-16-2007, 06:21 PM
well ive used 2x4's as bracing before, but its more like from one wall to the other or top to bottom, not just along the wall

Bumpn Focus
01-16-2007, 06:26 PM
holy **** that is huge.

Thats what she said.



Box looks good.

fawd06
01-16-2007, 07:43 PM
holy **** that is huge.

yeh its pretty big takes up my back seat!!!

PV Audio
01-16-2007, 07:51 PM
Too many screws my ***, it won't affect anything.
:uhoh: Yeah, it can.

PV Audio
01-16-2007, 07:53 PM
itll help keep those walls from flexing.


top is double baffeled, and the bottom should be just fine.

try it for yourself, then tell me what you find.


i would have agreed with you, until i did it in the wall for the explorer.....
I agree with both of you, it does work, but there are more effective means of bracing. By having it like how he does, it's kinda like "passive" bracing because you're bracing the front to the top and bottom, which is braced to the back. Conversely, it'd be more effective to run front to back since they're going to need the bracing the most. Really, I can't imagine it flexing at all, but in theory it isn't wrong, but he could've made it simpler. :)

o6blink
01-16-2007, 09:04 PM
holy **** that is huge.

Thats what she said.



Box looks good.

Yeah, tell her thanks for the compliment.

:naughty:

jk. :eyebrow:

iamamp3pimp
01-16-2007, 09:17 PM
i think its easier to brace along the wall, than in the middle of the box.


but thats imo.....We all have our methods.....and sometimes what works for one, soesnt work for another.

Immacomputer
01-16-2007, 09:31 PM
The box has a much better sound when tapping on it when the bracing runs along the wall instead of from one wall to the other. I tried both methods of bracing with my last enclosure and having some bracing along the wall really stiffened things up. You can hear a very noticeable difference in sound when tapping near each braces. The wall to wall brace has a lower sound and has a slight resonating sound to it. The other brace doesn't give any sound. This may not decide which is stronger but I think I'll stick with the single wall bracing method from now on.

PowerNaudio
01-17-2007, 12:01 AM
i rather do the bracing similar to the one in the pictures above, but horizontally just to cover more area of the wall. when you go from one wall to another, yeah you're bracing, but you're only covering one spot out of a full wall, so by bracing along the wall be it horizontally or vertically it will actual add more stiffness to the walls the it would by using the more traditional method.

if you look at my enclosures, youll notice that i have been using them for a while now and it most defenetly works for me.

fawd06
01-18-2007, 01:00 AM
got one hole cut out here some pics

fawd06
01-18-2007, 01:01 AM
http://i72.photobucket.com/albums/i176/kenny7231/box003-1.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box002-1.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box004-1.jpg

fawd06
01-18-2007, 01:02 AM
http://i72.photobucket.com/albums/i176/kenny7231/box005.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box006-1.jpg

In the box

http://i72.photobucket.com/albums/i176/kenny7231/box007-1.jpg

smd4life
01-18-2007, 01:07 AM
looks loud

fawd06
01-18-2007, 01:17 AM
more pics coming soon!!!!

quakerroatmeal
01-18-2007, 01:27 AM
I have the same car. A 95 Integra Coupe/Hatch. My new box is going to be 6.5cuft after displacements. What are the specs of the box? Is your max width about 29"? What's the dimensions of the box. Did you keep the rear seats in just had em folded down? I'm taking mines out completely. Box looks big *** hell. Can I see more pics, of the rear seat area, where the box stops? What amp is he running and where's he mounting it, what kind of amp rack? What kind of elect system as well.

fawd06
01-18-2007, 01:40 AM
I have the same car. A 95 Integra Coupe/Hatch. My new box is going to be 6.5cuft after displacements. What are the specs of the box? Is your max width about 29"? What's the dimensions of the box. Did you keep the rear seats in just had em folded down? I'm taking mines out completely. Box looks big *** hell. Can I see more pics, of the rear seat area, where the box stops? What amp is he running and where's he mounting it, what kind of amp rack? What kind of elect system as well.

Dimensions of the box are 32 wide, 15 high, 40 deep!!! for now i just folded them down, but they will come out soon!!! ill upload some pics of the rear seat for you but as far as amp rack, it will go where the bottom part of the back is at!! The amp is a incriminator 20.1!!

fawd06
01-18-2007, 01:42 AM
Electrical system will be a iraggi 200 amp!!! with either some kinetik 2400's or nsb 125 batteries havent decided yet!!

quakerroatmeal
01-18-2007, 01:42 AM
Dimensions of the box are 32 wide, 15 high, 40 deep!!! for now i just folded them down, but they will come out soon!!! ill upload some pics of the rear seat for you but as far as amp rack, it will go where the bottom part of the back is at!! The amp is a incriminator 20.1!!

Same amp I'm going to run! I want to see the amp rack setup. I have something planned for my setup already. Pretty neat I see another integra with a big box like i'm going to have and the same amp. The box is 32" Wide? WTF!! I measured a few times and I swear max was 29" wide. Do know how you're going to have the amp rack/batteries setup? There's not much room left that I notice with such a huge box. I have an amprack laid out already. I'm also going to run the same alt (Iraggi 200amp). Did you get quote like 400$? Also going to run same batteries, hc2400s.

fawd06
01-18-2007, 01:48 AM
sorry for the crap pics!!!

http://i72.photobucket.com/albums/i176/kenny7231/box008-1.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box009-1.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box010-1.jpg

fawd06
01-18-2007, 01:52 AM
Same amp I'm going to run! I want to see the amp rack setup. I have something planned for my setup already. Pretty neat I see another integra with a big box like i'm going to have and the same amp. The box is 32" Wide? WTF!! I measured a few times and I swear max was 29" wide. Do know how you're going to have the amp rack/batteries setup? There's not much room left that I notice with such a huge box. I have an amprack laid out already. I'm also going to run the same alt (Iraggi 200amp). Did you get quote like 400$? Also going to run same batteries, hc2400s.

yeh 32 wide fits easy with room to spare actually the widest you can go is 33 wide!!! I havent made an amp rack but once i take the back seats out it will go in!! Yes i got the quote like 419 shipped for the alternator!! batteries will be either on the floor behind the front seat or where i currently have one in the back corner by the little light!!!

fawd06
01-18-2007, 01:53 AM
let me know if u need more pics of the back seat!! Also do u have ne pics of ur amp rack?

quakerroatmeal
01-18-2007, 01:58 AM
WIthout the backseat, You could build a amp rack behind the box that is in the rear seat area that would fit the IA 20.1 and some HC2400's depending how you do it. 33" Wide. I'm going to have to re-measure....

quakerroatmeal
01-18-2007, 02:00 AM
I am building it this weekend maybe. But here's a layout of the amprack.

http://i48.photobucket.com/albums/f206/shyboy817/NewSetup1.jpg

I'm still not sure how you fit 30"+ Width. I measured like twice and it was like 29" width. Which section did you measure? I measured right inbetween the plastic panels. 15" looks really high. Does it go above the rear trunk top? Mines going to be able 14" high. If your measurements really work I'm thinking of re-do'ing the measurements. The pic above is how my new setups going to be. The HC2400's will be in the box section where the amp's are going to be mounted.

fawd06
01-18-2007, 02:00 AM
WIthout the backseat, You could build a amp rack behind the box that is in the rear seat area that would fit the IA 20.1 and some HC2400's depending how you do it. 33" Wide. I'm going to have to re-measure....

well for a fact u can get 32 wide and the box still moves a lil bit!! ill go with 32 to be on the safe side!!! do u have your aamp rack yet?

quakerroatmeal
01-18-2007, 02:04 AM
Nah I am starting on the project this weekend. I'll do some re-measuring definitely and will most likely go with a 32" width.

fawd06
01-18-2007, 02:06 AM
yeh its between the plastic panels, 15 high is perfect u have like 1/2 inch to spare before it hits the wiper motor cover!!!

quakerroatmeal
01-18-2007, 02:07 AM
How much room do you have left from the port to the rear of the trunk? Can I get a picture of the trunk closed to see how high it is? It's not above the window seal is it? What years the car? 94-97 or 98-01?

fawd06
01-18-2007, 02:13 AM
its a 1994!!

quakerroatmeal
01-18-2007, 02:18 AM
Can I get the entire measurements of the box.

quakerroatmeal
01-18-2007, 02:18 AM
40" depth 33" wide 15" height?

fawd06
01-18-2007, 02:21 AM
yeh 40 deep 32 wide 15 high!!! im uploading pics right now

SAG3
01-18-2007, 02:22 AM
Can I get the entire measurements of the box.


40" depth 33" wide 15" height?

Answer your own questions much?

quakerroatmeal
01-18-2007, 02:22 AM
Hm I believe my new box is around 40" depth 29" width and 14" height. Might change up the width/height so the box could be a little shorter.

fawd06
01-18-2007, 02:22 AM
right corner where my battery is currently at

http://i72.photobucket.com/albums/i176/kenny7231/box002-2.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box003-2.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box004.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box005-1.jpg

http://i72.photobucket.com/albums/i176/kenny7231/box006-2.jpg

quakerroatmeal
01-18-2007, 02:23 AM
Answer your own questions much?

Was just double-checking. I was off on the width anyways. I have the same car so I wanted to make sure. No pic of sub mounted? I would think that sub mounted + excursion would think the rear wiper panel area?

fawd06
01-18-2007, 02:24 AM
does the pics cover what u need?

SAG3
01-18-2007, 02:26 AM
Where's the other hole?

quakerroatmeal
01-18-2007, 02:27 AM
I wanted to see it with the sub still mounted. It looks like the sub + the rear-wiper plastic panel is too close with the sub is mounted. You sure it has enough room to excursion?

hoodkid
01-18-2007, 02:28 AM
i thought this was for 2 subs?

fawd06
01-18-2007, 02:30 AM
Where's the other hole?

i havent cut it out yet it will be cut out tomm!!!

fawd06
01-18-2007, 02:31 AM
i thought this was for 2 subs?

it is for 2 subs other hole will be cut out tomm!!!

fawd06
01-18-2007, 02:41 AM
http://i72.photobucket.com/albums/i176/kenny7231/sub001.jpg
http://i72.photobucket.com/albums/i176/kenny7231/sub002.jpg

quakerroatmeal
01-18-2007, 03:05 AM
Hm... I think I'll stick to 14" height. Cause I believe my box will be closer to the rear of the trunk then that. But I'm not sure how much room you have. My sub looks like it'll either be real close to the rear wiper plastic panel that it might even hit it. Hell mines not even on lol but the motor's still there.

96MaxGLE
01-18-2007, 03:51 AM
I feel sorry for your back glass. Talk about making your wiper jump, can't wait to see vids

fawd06
01-18-2007, 01:48 PM
I feel sorry for your back glass. Talk about making your wiper jump, can't wait to see vids

lol ill post vids when i get it set up!!

splbeast
01-27-2007, 11:01 AM
ttt :naughty:

Lil_KB
01-27-2007, 12:02 PM
what are you powering them with? it's gonna be loud in that little hatch.

i might have to hear this one day.

fawd06
01-27-2007, 01:05 PM
what are you powering them with? it's gonna be loud in that little hatch.

i might have to hear this one day.

gonna be powered by my incriminator 20.1 at 1ohm for 1ohm for daily, or might just try it at .25 daily but need to get my electrical system straight before i even think about putting it at .25.

Skip01
01-27-2007, 02:15 PM
gonna be powered by my incriminator 20.1 at 1ohm for 1ohm for daily, or might just try it at .25 daily but need to get my electrical system straight before i even think about putting it at .25.

http://www.datair.com/images/poof.JPG

Haha....that should be a fun day

duckfart
01-27-2007, 02:25 PM
15 high fits in a Integra without taking out the stupid rearwindshield wiper motor ? I also have a 95 Integra LS coupe .

bholtmeier
01-27-2007, 02:37 PM
Perty nice lookin box..bet that **** will get lOUUUD

fawd06
01-27-2007, 04:23 PM
15 high fits in a Integra without taking out the stupid rearwindshield wiper motor ? I also have a 95 Integra LS coupe .

yes fits no problem still got a lil room to spare like 1/2 inch

fawd06
01-27-2007, 04:24 PM
http://www.datair.com/images/poof.JPG

Haha....that should be a fun day

why do you always hate on other people stuff? are u jealous that u cant get nothing? stop being a lil ***

fawd06
01-27-2007, 04:28 PM
Perty nice lookin box..bet that **** will get lOUUUD

thanks!! hopefully it will get loud box... box is almost done got both holes cut out already, gonna put carpet on today.. more pics coming soon

iamamp3pimp
01-27-2007, 05:13 PM
i rather do the bracing similar to the one in the pictures above, but horizontally just to cover more area of the wall. when you go from one wall to another, yeah you're bracing, but you're only covering one spot out of a full wall, so by bracing along the wall be it horizontally or vertically it will actual add more stiffness to the walls the it would by using the more traditional method.

if you look at my enclosures, youll notice that i have been using them for a while now and it most defenetly works for me.

i cant lie, i got the idea from you

Skip01
01-27-2007, 05:14 PM
why do you always hate on other people stuff? are u jealous that u cant get nothing? stop being a lil ***

Hating or a joke....do u see Paul freakin out that you say his is gonna blow or hit only 145...NO....so calm down and change your **** beads

Pyro_By_Nature
01-27-2007, 05:16 PM
Hating or a joke....do u see Paul freakin out that you say his is gonna blow or hit only 145...NO....so calm down and change your **** beads

Are you the little fat kid? :laugh:

DaGh0st
01-27-2007, 05:30 PM
looking good.

bty what is the SX reconed to?(send him home he misses me) :)

Skip01
01-27-2007, 05:48 PM
Are you the little fat kid? :laugh:

Husky would be the word id use:D

And this is my next door neighbor junior, we argue like this all the time

fawd06
01-27-2007, 06:59 PM
looking good.

bty what is the SX reconed to?(send him home he misses me) :)

its still a 15 but now its dual 1. (he doesnt want to come home yet)

fawd06
01-28-2007, 03:11 AM
port painted black
http://i72.photobucket.com/albums/i176/kenny7231/sub002.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub003.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub001-1.jpg

fawd06
01-28-2007, 03:16 AM
http://i72.photobucket.com/albums/i176/kenny7231/sub007-1.jpg

fawd06
01-28-2007, 03:16 AM
carpet on

http://i72.photobucket.com/albums/i176/kenny7231/sub008.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub010.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub010.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub011-1.jpg

fawd06
01-28-2007, 03:19 AM
waiting on other sub to get reconed.. more pics coming soon

bdawson72
01-28-2007, 04:19 AM
nice

fawd06
01-28-2007, 08:03 PM
nice

thanks other sub should be in soon!!! just finished talking to scott@ ficaraudio

Skip01
01-28-2007, 08:08 PM
Carpet came out nice sweet.....was it hard to work with being thicker

fawd06
01-28-2007, 08:14 PM
Carpet came out nice sweet.....was it hard to work with being thicker

nah not really, piece of cake:D .

lostdaytomorrow
01-28-2007, 08:21 PM
Looks great man, good job. That's gonna WANG. You running components up front?

fawd06
01-28-2007, 08:36 PM
Looks great man, good job. That's gonna WANG. You running components up front?

thanks just got some infinity's 6.5's. they are decent but will be upgraded soon:D

baseballer1100
01-28-2007, 11:33 PM
Looks kinda loud..

fawd06
01-29-2007, 12:06 PM
Looks kinda loud..

:D

kicker06
01-29-2007, 01:22 PM
What was your carpeting technique?

fawd06
02-08-2007, 01:42 PM
more pics updated 2nd sub finally came in

false floor

http://i72.photobucket.com/albums/i176/kenny7231/sub004-1.jpg

fawd06
02-08-2007, 01:43 PM
both subs in box

http://i72.photobucket.com/albums/i176/kenny7231/sub001-2.jpg

fawd06
02-08-2007, 01:43 PM
http://i72.photobucket.com/albums/i176/kenny7231/sub003-1.jpg

fawd06
02-08-2007, 01:44 PM
and the kicker 1/0 wire lying in a bucket. running the wire tonight should have everything hooked up tonight


http://i72.photobucket.com/albums/i176/kenny7231/sub006-2.jpg

http://i72.photobucket.com/albums/i176/kenny7231/sub005-1.jpg

Skip01
02-08-2007, 09:40 PM
Hurry that ish up im waiting to meter and u had better bring that jigsaw with you

fawd06
02-09-2007, 02:19 AM
just a pic of the wire ran
http://i72.photobucket.com/albums/i176/kenny7231/sub007-2.jpg

box installed in the car

http://i72.photobucket.com/albums/i176/kenny7231/sub008-1.jpg

audiobahnuser18
02-09-2007, 02:39 AM
Man that is gonna be one loud hatch very nice build and great deal on keepn us all updated very nice build though man , i plan on building my ported box this summer for my 2 12's props to hixbox for making me the plans for it:).

fawd06
02-09-2007, 02:58 AM
Man that is gonna be one loud hatch very nice build and great deal on keepn us all updated very nice build though man , i plan on building my ported box this summer for my 2 12's props to hixbox for making me the plans for it:).

thanks! i got it hooked up tonight played around with it, all i can say is i like it! Vids coming soon

SAG3
02-09-2007, 03:05 AM
Is your Integra auto?

fawd06
02-09-2007, 05:37 PM
Is your Integra auto?

no its the 5speed gsr

fawd06
02-09-2007, 09:14 PM
just metered it a little while ago.. hit 147 on music and 147.4 @44hz

fawd06
02-09-2007, 09:14 PM
radio kept messing up and broke. should gain a lil once the other sub breaks in

Skip01
02-12-2007, 01:20 PM
Post the pics of the recent metering

Lil_KB
02-12-2007, 01:29 PM
decent score...but we need vids...

Skip01
02-12-2007, 06:10 PM
decent score...but we need vids...

What did i tell you about readin....go get urs up an running...no more posts til its wangin:D

And we gained .4 just from trying stupid stuff that worked...should be at 148 before the weekend:up2somet:

fawd06
02-12-2007, 09:10 PM
Post the pics of the recent metering

i dont know why but it wont let me send them to my email so i can upload them. crap cingular lol

fawd06
02-12-2007, 09:11 PM
What did i tell you about readin....go get urs up an running...no more posts til its wangin:D

And we gained .4 just from trying stupid stuff that worked...should be at 148 before the weekend:up2somet:

we gained a lil by opening the sunroof, moving the visors down and bracing the passanger door. should be 148 or higher this weekend once we get a lil more help.

Lil_KB
02-12-2007, 09:16 PM
What did i tell you about readin....go get urs up an running...no more posts til its wangin:D

And we gained .4 just from trying stupid stuff that worked...should be at 148 before the weekend:up2somet:

it'll be running by thursday evening. i'll have your vids friday, quit whining. :p:

fawd06
02-12-2007, 09:19 PM
it'll be running by thursday evening. i'll have your vids friday, quit whining. :p:

lol same here havent had time for a vid because we been playing around with the meter.

Lil_KB
02-12-2007, 10:26 PM
where the hell is marrero at in LA? we need to all meet up and have a listen/meter to our systems when they're running right...lol.

fawd06
02-12-2007, 10:27 PM
where the hell is marrero at in LA? we need to all meet up and have a listen/meter to our systems when they're running right...lol.

its close to new orleans about 15 minutes away where ur located?

Lil_KB
02-12-2007, 10:30 PM
lil hicktown called white castle...about 45 minutes south of baton rouge...new orleans is a couple hours away from me...

Skip01
02-13-2007, 01:53 AM
lil hicktown called white castle...about 45 minutes south of baton rouge...new orleans is a couple hours away from me...

Yeh just mapquested white castle...1hr 51min away....hmmmm maybe meet halfway in Laplace.
Def. sounds like a plan though.....and ill whine all the way to Fri if i want:laugh:

Lil_KB
02-13-2007, 02:24 AM
yup...but i wont have the time for it anytime soon...busy busy this weekend...driving down to thibedaux to break in the system and get drunk as hell for mardi gras...

quakerroatmeal
02-13-2007, 02:38 AM
Box looks bigger then mines. I think it is! Looking good. You'll still lose to me :)

fawd06
02-13-2007, 01:28 PM
Box looks bigger then mines. I think it is! Looking good. You'll still lose to me :)

box is bigger than urs:) just ordered alternator bty

fawd06
02-13-2007, 01:29 PM
Yeh just mapquested white castle...1hr 51min away....hmmmm maybe meet halfway in Laplace.
Def. sounds like a plan though.....and ill whine all the way to Fri if i want:laugh:

yup u whine alot:)

Skip01
02-13-2007, 04:48 PM
yup u whine alot:)

Me and Quaker came to a decision....i gotta start chargin u for Termlab use.
Its not fair to him....:crap:

fawd06
02-14-2007, 07:18 PM
here is a small vid of the subs in action..

http://youtube.com/watch?v=6nlxm1ycd6o

Calikid
02-14-2007, 07:19 PM
booooooooooo,


doesnt work

Calikid
02-14-2007, 07:19 PM
photobucket ftw!!!!

fawd06
02-14-2007, 07:32 PM
booooooooooo,


doesnt work

it was just uploaded so giveit a sec

DaGh0st
02-14-2007, 07:37 PM
psshh ghey where the vid feg?


:)

fawd06
02-14-2007, 07:41 PM
psshh ghey where the vid feg?


:)

psshh its working now...

http://youtube.com/watch?v=6nlxm1ycd6o

kickerlivinloud
02-14-2007, 07:42 PM
Impressive flex you got htere!



Jon

Skip01
02-14-2007, 07:54 PM
Here ya go homos:

http://i63.photobucket.com/albums/h136/DatDudeBL/th_Kennysubs.jpg (http://s63.photobucket.com/albums/h136/DatDudeBL/?action=view&current=Kennysubs.flv)

iamamp3pimp
02-14-2007, 08:03 PM
nice vid you got there.



real nice.

kotec123
02-14-2007, 08:09 PM
lol wow that looks loud

iamamp3pimp
02-14-2007, 08:24 PM
looks can be decieving.

but in this case, they arent.

DaGh0st
02-14-2007, 08:30 PM
wowzers.

mazdakid
02-14-2007, 08:32 PM
**** looks loud

Skip01
02-14-2007, 08:33 PM
wowzers.

See what a real man can do with SXs.....well...after he got them reconed of course...haha:)

fawd06
02-14-2007, 08:33 PM
**** looks loud


thanks, it pretty decent:) ...

fawd06
02-14-2007, 08:34 PM
wowzers.

the sx said, "they miss u"

DaGh0st
02-14-2007, 08:46 PM
**** i wish i had the airspace for em....



Glad somebody could put them to work.

Immacomputer
02-14-2007, 10:56 PM
Told you that you would have some nasty flex around 25-30hz. If my single 12 can make the wiper hop, your setup should blow it up and it looks like it's close to it!

fawd06
02-15-2007, 12:43 AM
Told you that you would have some nasty flex around 25-30hz. If my single 12 can make the wiper hop, your setup should blow it up and it looks like it's close to it!

haha its pretty nice flex but still should flex more lol