PDA

View Full Version : Build Log for Jiggy2dmax



baseballer1100
01-12-2007, 12:21 AM
This is for jiggy2dmax. 3 cubes for 3 10 inch pg ti subs....
Pieces cut...
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1109.jpg
SOme more shots..
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1110.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1111.jpg
Side on.
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1112.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1113.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1114.jpg
Both sides and back. I love clamps....
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1127.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1128.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1129.jpg
Big CLAMPSS FTW!!!
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1130.jpg

baseballer1100
01-12-2007, 12:26 AM
Perfect Circles?
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1126.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1131.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1133.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1132.jpg
Front on!!!
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1134.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1135.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1136.jpg
Front and top Almost done...
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1140.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1141.jpg

baseballer1100
01-12-2007, 12:28 AM
Rounded edges. Set the **** roundover down to far nothing a little sandpaper wont fix(its in the back corner and only one spot but aftger some sanding it looks fine).
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1148.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1147.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1150.jpg
Done..
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1149.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1153.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1152.jpg
Got Circles?
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1144.jpg
Wood anyone?
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1145.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1157.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1158.jpg

baseballer1100
01-12-2007, 12:29 AM
Should of put 56k beware. lol
Another box..
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1160.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1139.jpg
http://i144.photobucket.com/albums/r178/baseballer2030/CIMG1137.jpg

jiggy2dmax
01-12-2007, 12:31 AM
Wow, looks amazing, props on the work man. I love it!

Lil_KB
01-12-2007, 12:32 AM
jesus ***** f*cking christ that's a lot of wood.

nice box though. i'd be building all day if i had resources like that..

jiggy2dmax
01-12-2007, 12:34 AM
PS, PM me whenever your ready for the label and money!

acold7dusta
01-12-2007, 12:36 AM
lotta wood man, keep up the good work

baseballer1100
01-12-2007, 12:36 AM
jesus ***** f*cking christ that's a lot of wood.

nice box though. i'd be building all day if i had resources like that..

Yeah if only I had had 4x8 sheets of mdf laying around....

baseballer1100
01-12-2007, 12:37 AM
PS, PM me whenever your ready for the label and money!

I need to package it up and get the final weight and stuff for the label. Most likely tommorow after noon as i just finished it up and havent gotten any boxes yet.

Immacomputer
01-12-2007, 12:38 AM
Awesome work!

No bracing on the sealed enclosure? That's going to be a ton of pressure with those three subs. That back panel looks too long to not flex.

baseballer1100
01-12-2007, 12:40 AM
Yeah good point i might put some in there but that is going to bring down the voume more. Its barely 3 cubes as it is. Up to jiggy i guess.

jiggy2dmax
01-12-2007, 12:44 AM
Yeah good point i might put some in there but that is going to bring down the voume more. Its barely 3 cubes as it is. Up to jiggy i guess.

Doubt it'll need it, running about 700 watts to the three. SQ setup!

j3bus2k3
01-12-2007, 12:45 AM
2 2x1's from front to back would be negligible volume wise...

baseballer1100
01-12-2007, 01:00 AM
Doubt it'll need it, running about 700 watts to the three. SQ setup!

woot!

PowerNaudio
01-12-2007, 01:00 AM
looks good mang

baseballer1100
01-12-2007, 01:01 AM
looks good mang

why thank you.

bballrrt06
01-12-2007, 01:56 AM
looking good mike, still up for that partnership? lol

baseballer1100
01-12-2007, 01:57 AM
haha we will talk.

rpfuror
01-12-2007, 09:28 AM
Looks nice, do you just use glue or any other type of bracing? If only glue how long do you let it set?

baseballer1100
01-12-2007, 03:48 PM
I used glue and i used a narrow crown stapler. Like 20 or so minutes. No bracing.

baseballer1100
01-13-2007, 06:55 PM
Mdf boogers ****.

acold7dusta
01-13-2007, 07:01 PM
Mdf boogers ****.

haha yea they do

good work as usual i may add

baseballer1100
01-13-2007, 07:58 PM
Why thank you.

PV Audio
01-13-2007, 09:57 PM
Box looks great, but I'm more worried about your router. Why in the name of Jesus are you using a fixed base to cut out circles? That would take forever :crap:

baseballer1100
01-13-2007, 09:59 PM
I was trying it out. It didnt take long at all. I flipped over the piece ;)

saywhat?
01-13-2007, 10:03 PM
pvaudio doesnt know what hes talking about fyi. you can cut just as well with them, as without them ;)

oh and start yours ****it.

baseballer1100
01-13-2007, 10:04 PM
I did. Prolly do more tommorow prolly finish monday maybe i got a real good idea. :)

PV Audio
01-14-2007, 12:10 AM
pvaudio doesnt know what hes talking about fyi. you can cut just as well with them, as without them ;)

oh and start yours ****it.
Oh yeah, I don't know what I'm talking about because:


Patented Jasper Circle Guides are extremely accurate, easy to use and very durable - pre-drilled and countersunk, they accept plunge routers made by Porter-Cable®, Hitachi®, Black & Decker®, BOSCH, DeWalt®, Makita®, freud®, Ryobi®, Skil® and Sears®:

Like I said, it's made for a plunge base, so I was wondering why you would use a fixed base when it's much easier and you can vary the depth as you go along.

baseballer1100
01-14-2007, 12:12 AM
Oh yeah, I don't know what I'm talking about because:



Like I said, it's made for a plunge base, so I was wondering why you would use a fixed base when it's much easier and you can vary the depth as you go along.


I just wanted to try it out.lol. Plus i wanted to see if my base was smaller on the fixed base and if i could maybe cut some 6 inch circle with it.

PV Audio
01-14-2007, 12:13 AM
Yeah I know, I was just wondering why Grant was breakin my balls about it.

baseballer1100
01-14-2007, 12:14 AM
lol. No clue. I need to get a smaller jasper jig. i love this **** thing.

bdawson72
01-14-2007, 12:15 AM
Thats a **** nice box

bjfish11
01-14-2007, 12:16 AM
Ive actually used a fixed base router for circles before. Just untighten your clamp that holds your depth and lower the depth. Kinda makes it a "semi"- plunge router ;)

James Bang
01-14-2007, 12:17 AM
some 1.5"-2" wooden dowels would do well for bracing w/ minimal displacement. w/ or w/o bracing it looks great. nice work.

baseballer1100
01-14-2007, 12:20 AM
Thats a **** nice box
thank you.

Ive actually used a fixed base router for circles before. Just untighten your clamp that holds your depth and lower the depth. Kinda makes it a "semi"- plunge router ;)
it sure does.

some 1.5"-2" wooden dowels would do well for bracing w/ minimal displacement. w/ or w/o bracing it looks great. nice work.

its already packaged up and ready to go. So i would but its up to jiggy at this point. Thanks.

James Bang
01-14-2007, 12:21 AM
oh and...

**** i want a workshop like yours.

baseballer1100
01-14-2007, 12:22 AM
oh and...

**** i want a workshop like yours.

Lol. I want an amprack like yours.