PDA

View Full Version : port question



unrated
01-07-2007, 12:50 AM
ok sorry for all the post ppl but i have 1 final port question

heres what im working with
internal dimentions
H=19"
W=22.75"
D1=14.5"
D2=20.25
=4.346 Cubes net

4.123 cubes after sub diplacement

now i have calculated for port and this is what it came up with

Quantity of ports - 1
Enter Enclosure Volume (ft3 ) - 4.123 cubes
Enter Desired Tuning Frequency 34hz
Enter Height Inches - 3.5"
Enter Width Inches - 13"
=Vent Length 13.65"

my question, now if i build that in my box, will it change the tuning freq cause it will make the box cubes smaller?

unrated
01-07-2007, 01:17 AM
anyone?!?!?

mattf
01-07-2007, 03:25 AM
I do believe it will. It should raise it if I am correct.

unrated
01-07-2007, 10:57 AM
I do believe it will. It should raise it if I am correct.


so do i need to shorten the port length or make it longer?!?!?

DaBurner
01-07-2007, 11:19 AM
so do i need to shorten the port length or make it longer?!?!?

im pretty sure u should make it a little smaller