PDA

View Full Version : Im impressed, Tang Bands look nice....



OoMesKoO
01-03-2007, 12:26 PM
But how do they perform? What im looking to do is add some into the front stage of my vehicle. I have the room to add 2 in a center channel, make custom A-pillars, and custom kick-panels. Im looking to brighten up the front. Alot. What model of the tang-bands would be the loudest for a mid/high setup? Any information would be appreciated greatly. Thanks!

Bradd

jmanpc
01-03-2007, 12:27 PM
I have their 6x9 subs and i love them. great drivers, awesome price.

OoMesKoO
01-03-2007, 12:43 PM
Ill be blunt. Im looking to get loud. Actually as loud as possible, for a decent amount of money. I figured these speakers are priced extremely good. So if i can squeeze like 6 of them, with like.... 4 tweets in the front stage of my vehicle, ill be more than happy. Which of them would be my best option?

OoMesKoO
01-03-2007, 12:44 PM
or would maybe the daytons be a better option for me?

jmanpc
01-03-2007, 12:45 PM
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=264-835

those tweets could prolly blow yer face off

OoMesKoO
01-03-2007, 12:51 PM
heh... see that was the answer i was looking for!!

Now what about the speakers?

jmanpc
01-03-2007, 12:52 PM
what size

OoMesKoO
01-03-2007, 12:57 PM
Well.... considering i have a Tahoe, and its all going to be custom work... size isnt really a factor. Ill put a 10" in if i am assured its going to be hella loud!

http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=295-015

I was even looking at those! lol.

Just the loudest as possible, for cheap money.

alteraudiousa
01-03-2007, 01:13 PM
well if you're up to custom stuff mount a set of Dayton Reference 8in in the doors, some 6in or 5in in kicks along with the Dayton tweets. Then use the Tang Band 6.5 sub in a center channel consisting of a 4in and a tweeter. Get a good substage and you'll be set. It won't cost you too much except finding or making crossovers unless you run active. You could always get a set of 3way components from CDT. and then make a custom center channel.

OoMesKoO
01-03-2007, 01:28 PM
Im looking to match these Specs:

Power Rating, as per EIA-RS426A (Watts): 300
Sensitivity, 1w@1m (db SPL): 97.0
Maximum Calculated SPL (dB SPL): 121.8
Nominal Cone Diameter (in.): 10 (mm): 254
Nominal Coil Diameter (in.): 2.5 (mm): 63.5
Nominal Impedance (ohms): 8
Frequency Range (Hz): 100-2000
Nominal Efficiency (%): 4.21
Max Calculated Acoustic Power (Ac. Watts): 12.6
Magnetic Material: Ceramic
Acoustic Polarity for "+" Voltage: Positive


For as cheap as possible. Not really sure how to do it as of yet. But would like to try. Thats why i figured about 4 of these:

http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=295-015

Would do.

Curel
01-03-2007, 02:25 PM
Do you have enough processing to pull that off?

OoMesKoO
01-03-2007, 02:40 PM
I dont see why not...

Curel
01-03-2007, 02:42 PM
What processing do you have? Are you able to bandpass?

jmanpc
01-03-2007, 02:42 PM
you're gonna need lots of crossoverage

OoMesKoO
01-03-2007, 02:50 PM
Ive got a Fosgate Oeq2. Anything else needed?

DejaWiz
01-03-2007, 03:35 PM
The OEQ2 is an equalizer, not a crossover.

OoMesKoO
01-03-2007, 04:03 PM
ahh... i see.....

Curel
01-04-2007, 02:18 PM
I think you'll be better off with some dynaudio md170 components with 200+ watts per side.

///M5
01-08-2007, 08:15 PM
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=264-835

those tweets could prolly blow yer face off

Not really, especially compared to horns.

jmanpc
01-08-2007, 08:15 PM
horns and regualr tweets are worlds apart.

///M5
01-08-2007, 08:23 PM
Ill be blunt. Im looking to get loud. Actually as loud as possible, for a decent amount of money.
Agreed, but that statement I just quoted screams horns to me especially considering he already has an eq.

Trey803
01-08-2007, 08:26 PM
You have a tahoe, and you want to get loud. I would look into 15's and 18's