c_hayhurst

01-01-2007, 03:37 PM

I recently bought a 2004 Nissan Sentra. I have a 12" RE SE sub in a ported box, made to RE's specs before RE was bought out and their box schematics were removed by their new owners (I'm still less than thrilled about that whole thing).

The ported box is WAY too big for my Sentra's trunk, so I'll need to either:

-Find a new ported box design which will allow me to fit the sub and amps into the trunk, or

-Find a diagram for building a sealed enclosure for the sub.

Does anyone have plans for either?

My calculations for a sealed box for a 12" SE , with 1.0 cubic foot of space are: 9.5" deep, 13.5" wide, 13.5" long... 9.5"= .79 cu ft, 13.5'=1.125 cu ft, so .79x1.125x1.125= 1 cubic foot.

If these dimensions are incorrect, please let me know.

The ported box is WAY too big for my Sentra's trunk, so I'll need to either:

-Find a new ported box design which will allow me to fit the sub and amps into the trunk, or

-Find a diagram for building a sealed enclosure for the sub.

Does anyone have plans for either?

My calculations for a sealed box for a 12" SE , with 1.0 cubic foot of space are: 9.5" deep, 13.5" wide, 13.5" long... 9.5"= .79 cu ft, 13.5'=1.125 cu ft, so .79x1.125x1.125= 1 cubic foot.

If these dimensions are incorrect, please let me know.