View Full Version : 2006 jetta remote start

12-28-2006, 11:48 PM
Anybody done one of these yet? Any help would be apprecitated. Especially how to access the ignition wiring.

12-28-2006, 11:50 PM
I think there is a wiring chart at www.bulldogsecurity.com if i got that website right :)

12-29-2006, 01:37 AM
im gunna be doing one in a few days. Supposed to be very complicated.

12-29-2006, 11:46 AM
im gunna be doing one in a few days. Supposed to be very complicated.

my passat was near impossible! tons of wire in a very small space, im taking my a4 to a shop if i get any sort of alarm on it

12-29-2006, 11:49 AM
data bus :woot:

12-29-2006, 11:51 AM

12-29-2006, 03:31 PM
omg i love doing vw remote starts

12-29-2006, 05:03 PM
and yet you does not have one on the dub

12-29-2006, 05:13 PM

12-29-2006, 07:32 PM
there is a module below the ignition that has to come down to access the harness. I can't figure out what is holding it up. There is 1 torx screw that I have removed but it still won't come off.

12-31-2006, 01:39 AM
omg i love doing vw remote starts

Then I have one for ya...next week? '07 Jetta. :D

12-31-2006, 01:43 AM
just had my friend who owns a shop do my girls 2006 jetta, they said it was a pain in the ***.

there is a door lock trigger modual that you have to get that you have to take the driver side door off to get at the lock switch module, and you also have to tap into the factory alarm to make it work.

took them all day to do it.

good luck is all i say to you

12-31-2006, 01:45 AM
databus modules make it Alot easier...

12-31-2006, 01:48 AM
databus > life

01-01-2007, 09:57 PM
i <3 Databus...

01-01-2007, 10:00 PM
VW's and pretty much anything else german are pains in my ***.

01-02-2007, 09:05 PM
VW's and pretty much anything else german are pains in my ***.

+ eleventy billion

01-02-2007, 09:19 PM
yup, my car is annoying to do anything electrical on... except when using the data port :) my car may or may not be smarter than me. it's pretty close.

01-02-2007, 10:17 PM
Does anyone know how to get that module down? If I can get it down without breaking it I can do the remote start with no problem.

01-02-2007, 10:18 PM
IIRC 2 10mm bolts?

01-02-2007, 11:00 PM
everything in that car is held together with Torx bolts.

try here http://forums.vwvortex.com/zerothread?id=2374154

look in the interior FAQ and installing the dash cubby. that might help you. if you just want to take off the bottom plate there are a few torx bolts (i think three) on the side that is closest to the front bumper. at least thats how my GLI is, and i'm assuming it's the same.