PDA

View Full Version : will a 15" fit in this box?



budahbuddy803
12-27-2006, 09:00 PM
This is molesters sticky 2.75ft^3 @ 30hz. Can i fit my 15" IDQ in this box? I think its too small. If it is too small can anyone come up with plans for a box that is 2.75ft^3 @ 30hz?
http://img23.imageshack.us/img23/3410/275cubes30hz39sqin0gn.png

budahbuddy803
12-27-2006, 09:04 PM
can someone please help me out i really want to try to build my first box.

budahbuddy803
12-27-2006, 09:08 PM
ID's website says the mounting diameter is 13.875" i dont think it will fit it that one because the front baffle is 29.75"x13" i need .875". Will adding an inch to the height of the front and rear baffle's completely change the tuning?

bluelceii
12-27-2006, 10:25 PM
a 15 won't but a 12 will...

iamamp3pimp
12-27-2006, 10:32 PM
it will completely change it,p but not enough to notice.

406er
12-27-2006, 10:40 PM
considering its only 14.5" high and u have a 15" sun im just gonna say NO

406er
12-27-2006, 10:41 PM
this should help out

http://reaudio.com/speaker_box/LPort_Box_Calc.html

j3bus2k3
12-27-2006, 10:42 PM
If you dont care too much about being precise, just add an inch to the height and take an inch off the width...problem solved...

406er
12-27-2006, 10:44 PM
34.25X16X316

3" wide port 20"long

3 cu ft@ 30Hz then you gotta factor in driver displacement should bring around 2.75 net

play around with it man

blazinlow
12-27-2006, 10:52 PM
18x67x15.5 with port of 8x43 is optimum. i called id for ya :)