PDA

View Full Version : 98 Camaro Front Bezel



Bloodhound34
12-20-2006, 11:31 PM
Is this a single or double DIN opening? I am interested in putting a carputer in my car and I would like to know if this (http://cgi.ebay.com/ebaymotors/Lilliput-EBY-701-7-Inch-Widescreen-Touchscreen-Monitor_W0QQitemZ190063450279QQihZ009QQcategoryZ38 650QQrdZ1QQcmdZViewItem)monitor will fit. And if it won't fit, how much fabrication would it take to make it fit, and do they make anything that you can buy such as a new custom bezel or something like that to make it fit?

davidfre21
12-20-2006, 11:33 PM
its a 1.5 din

Bloodhound34
12-21-2006, 09:01 PM
So I take it they don't make anything for GM vehicles to increase it to a double din opening or something that will fit the monitor?

Bloodhound34
12-21-2006, 09:05 PM
If they don't make anything to make it fit could you possibly lead me in the direction of a touchscreen monitor 7" that will fit a 1.5 DIN opening or that will require no fabrication?

davidfre21
12-21-2006, 11:10 PM
u can make it into a double din, ive seen it done a few times

.::DuD3::.
12-22-2006, 11:39 AM
ever thought about using that little pocket down below in front of the shifter? i was thinking of putting one there when i had my camaro. but do a search on www.mp3car.com for camaros. theres this one SUPER **** z-28. in fact let me find it real quick.

.::DuD3::.
12-22-2006, 11:40 AM
:drool:
http://www.mp3car.com/vbulletin/showthread.php?t=72972&highlight=z28

9512ds
12-22-2006, 11:47 AM
drool...

Bloodhound34
12-22-2006, 12:40 PM
So ya, That's basically what I would like to make my camaro look like except I was thinking possibly a motorized deck? Would that fit stock or are they single DIN?

Also how did the guy do that? Did he take the stock bezel off or buy a new one and like cut it and re-fiberglass it or what? I don't know what materials to use or even where to start with that sort of stuff although if I could I would really like to make my bezel like that one except I'd want it red and glossy.

young_gun
12-22-2006, 12:50 PM
So ya, That's basically what I would like to make my camaro look like except I was thinking possibly a motorized deck? Would that fit stock or are they single DIN?

Also how did the guy do that? Did he take the stock bezel off or buy a new one and like cut it and re-fiberglass it or what? I don't know what materials to use or even where to start with that sort of stuff although if I could I would really like to make my bezel like that one except I'd want it red and glossy.
Most if not all motorized decks are single DIN i think. And i'm guessing the guy took his bezel off, cut/trimmed it and fiberglassed it back. Thats the norm way its usually done

.::DuD3::.
12-22-2006, 02:19 PM
look further in the post, he explains how he did it.

THUNDERBIRD
12-22-2006, 02:31 PM
so did u steal his pic for ur avatar?