PDA

View Full Version : Help With Single 12" Type R Box Design



doctorksp06
12-20-2006, 05:48 PM
I have a one 12" Alpine Type R (4-ohm) DVC sub that I'm powering with a Alpine MRD-M605 mono amp. I want to build the best box for this single sub. I have the space for 30"-16"-16" (W-H-D) in my 1996 Honda Prelude. I want it tuned to around 32hz and ported. I would like advise/diagrams of best box for this sub.

THANKS!

-KP

Diablo6699
12-20-2006, 05:59 PM
http://img23.imageshack.us/my.php?image=225cubes32hz35sqin0zj.png

that is what i used with 600 rms, loved it, perfect for that sub imo

doctorksp06
12-20-2006, 06:06 PM
Thanks... the only problem is that I only have 30" of width to work with... any other ideas?

Lonewolf32
12-20-2006, 07:43 PM
I can design you one.

2.3Cuft @31.25Hz

doctorksp06
12-21-2006, 12:58 PM
Could you.... thanks a ton. Is that good space and freq for that sub you think?

Lonewolf32
12-21-2006, 02:10 PM
I have heard that 2.2 cuft @ 32Hz is good, and this is not to much differant. I will design it in the morning I got up late and have to get to work. You can look at the design and see if you want to use it.

doctorksp06
12-21-2006, 11:04 PM
Perfect... sounds great!

THX

-KP

doctorksp06
12-22-2006, 01:17 PM
ALSO... real quick... what install kit would you recommend for my system?

Lonewolf32
12-22-2006, 09:21 PM
http://www.caraudio.com/gallery/2/8/9/3/3/singleTypeR1.jpg
http://www.caraudio.com/gallery/2/8/9/3/3/singleTypeR2.jpg
http://www.caraudio.com/gallery/2/8/9/3/3/singleTypeR3.jpg

As for the wire kit I would get atleast a 4 gauge.

Any questions P.M. me.