View Full Version : Ecclosure for Pioneer shallow subs TS-SW3041D

12-20-2006, 04:58 AM
These are the same as the Premier TS-SW1241D. There's very little info about them on the Pioneer website. (http://www.pioneerelectronics.com/pna/v3/pg/product/details/0,,2076_310069929_297969819,00.html)

Because they provide no T/S properties, and none of my programs have this driver in the database, I'm not sure how to go about planning the box for these subs.

I'm not sure if I can do a ported enclosure or not. Or if I do sealed, what size to go with. Pioneer says between .5 and 1.0, like thats any help. Anyone have experience with these subs? I'm thinking about calculating and publishing the T/S properties once I get the drivers tomorrow just because they seem to be unavailable.

This is what I know:
Impedance 4 ohms
RMS Power Range (Watts) 50-350
Vas (liters) 19.511
Fs (Hz) 33.1
Qts 0.73
Xmax (millimeters) 6.5
Sensitivity 88dB
Sealed Box Volume (cubic feet) 0.5 - 1
Ported Box Volume (cubic feet) 0.5 - 1
Port diameter (inches) 3
Port length (inches) 8