PDA

View Full Version : New box design Sketch-up PIC



bizzy07
12-18-2006, 05:21 AM
This is the first time I have really messed around with Sketch-up but I was happy with the results.

http://www.filelodge.com/files/room17/451783/untitled.JPG


3 10's
5 ft^3 after port displacement @32hz
3/4" mdf (double baffle)

bizzy07
12-18-2006, 05:38 AM
I'm thinking about going with three fi ssd10's.

PV Audio
12-18-2006, 08:06 AM
Okay..you haven't told us anything about the box in particular, plus I have no idea as to what the first pic is.

acold7dusta
12-18-2006, 10:37 AM
what are the little rectangles in the corner? is that for teminals?

jd_man_90
12-18-2006, 10:52 AM
Just a guess, but i would say the back is an amp rack and the rectangles are to route the wires through

bizzy07
12-18-2006, 09:01 PM
yes that is for the amp rack and those are holes for the wires

baseballer1100
12-18-2006, 09:02 PM
pic?

bizzy07
12-18-2006, 09:21 PM
it has not acctually been built yet but i am really considering it with 3 10" fi ssd's and about 2500watts

ssj2xxgotenxx
12-18-2006, 09:24 PM
You're still going to have wires sticking out of those rectangular slots... It's pretty tough to make a seemless transitions with amp intergrated onto boxes.

bizzy07
12-18-2006, 09:27 PM
You're still going to have wires sticking out of those rectangular slots... It's pretty tough to make a seemless transitions with amp intergrated onto boxes.

I will think of something im sure... at the time I was just worried about size issues because this is going into a trunk