PDA

View Full Version : Anyone wanna figure port tuning, etc///



bama350z
12-15-2006, 03:44 PM
Anyway, these are the dimensions I have to go in my bronco with the sub facing forward. I know my sketchup sux, just learning today....The LENGTH is 50" the DEPTH is 10" and the HEIGHT is 18.5"........I am wanting to use a FI Q tuned to 33 hz......Anyone wanna come up with a better sketchup for me with port (s) etc.......The only thing is I cant have the port or the sub on the extreme ends of the box..Thanks.....oh, and here's a pic of my bronco its going in the back of..

http://img.photobucket.com/albums/v313/bamamedstudent/000_0005_00.jpg

http://img.photobucket.com/albums/v313/bamamedstudent/box1.png

bama350z
12-15-2006, 03:45 PM
sorry, 12" fi Q with (from their website) a displacement of .16 cu ft.

bama350z
12-15-2006, 04:34 PM
need some help guys, dont know shite about this stuff...where the hole should be, etc........I got internal volume of 4.056 using 3/4 MDF.....so with sub displacement it would be 4.04 cubic feet...

bama350z
12-15-2006, 06:40 PM
project scrapped, i think.....