PDA

View Full Version : port help needed



jaco
12-15-2006, 01:54 AM
how much space do i need between an 8" x 10" port and
an interor panel in my car,
i have about 3 to 4 " in between my box and the rear hatch but if i do a ported box and port back will that be enough room ?
if not how dose a crx sound ported on the side.

jaco
12-15-2006, 02:15 AM
bump for some help please

jaco
12-15-2006, 02:42 PM
bupm againg

nVRuckus
12-15-2006, 03:04 PM
dont know the answer to that sorry.

lincolnls
12-15-2006, 03:07 PM
ideally you would want about 6 inches so that the air isnt restricted as to affect the tuning of the port (the more the better thou)

you said its a hatch back right?

if so make the port on top of the box and let the air just flow off of the rear glass

jaco
12-15-2006, 03:33 PM
ideally you would want about 6 inches so that the air isnt restricted as to affect the tuning of the port (the more the better thou)

you said its a hatch back right?

if so make the port on top of the box and let the air just flow off of the rear glass



i thought so also but everyone says in a crx subs up ports back.
thats why i was thinking port on the side.

psych0ticnemes1
12-15-2006, 03:40 PM
i have a hatch and no matter how i fire my box, it is just as loud to my ear. However in my blazer, it mattered.

Symon_say
12-15-2006, 06:02 PM
i have a hatch and no matter how i fire my box, it is just as loud to my ear. However in my blazer, it mattered.

x2