PDA

View Full Version : Custom TC9



Hintzyboy
12-13-2006, 12:00 AM
I'll be building an enclosure for the woofer I bought from TeamPSI soon. I know a few people on this forum have bought thes subs from him so I thought I'd ask. I figured out the dimensions, and I can get around 2.6 cuft before sub and port displacement. I looked on TCs website and the recommended enclosure for the TC-2000 (Also a TC9-based woofer) is 2 cubes with one 21" long, 4" diameter round port. So do you think that my box (56"x13"x5"Top Depth-11"Bottom Depth; .5" MDF backplate and bottomplate; .75" mdf for the rest) would be good for my woofer? I was planning on using 2 4" flared ports with 10" of length each so i can get the same port volume as the TC-recommended box.

Pyro_By_Nature
12-13-2006, 12:02 AM
2-2.5cf. tuned from 28hz-32hz is what mine liked best.

BTW: For the ports, it doesn't work like that.If you have 2 4" ports, they'll need to be even longer for the same tuning.

Hintzyboy
12-13-2006, 12:08 AM
Good to know. How would I get it tuned to the right frequency (30-32hz) without long ports. I don't want to have a side-firing port, because my box will be butting up against the walls of the cab. is there any way i can get a top-firing port (slotted or round) to get the correct frequency? Or maybe a slot port that ran lengthwise along the bottom of the box?

Pyro_By_Nature
12-13-2006, 12:15 AM
For 2 4" ports, they'll have to be about 25" each with 2.4cf. as the net.2 3" would be around 14-15", 1 4" will be around 11". Take your pick.

Hintzyboy
12-13-2006, 12:24 AM
port length really goes down that much with a .5 cube increase in net volume?