PDA

View Full Version : Buildin Box For X Mas



Ran4it2
12-08-2006, 02:39 AM
well i decided im gonna make a ported box for my brother for a xmas present.
he doesnt have a very nice setup but it does alright for what he listens to. He has one 10" RF P1 sub and i wanted to build him a ported box tuned to something around 32 - 34hz he has a 04 dodge neon im not sure how bit the box needs to be but i just want it too sound nice.
So my question is "Are there any box plans for a 10" tuned to 32hz?"
all i saw where 12" box plans and i wasnt sure if i could use those plans and just cut a hole for a 10 instead of a 12

dvrmstrng
12-08-2006, 02:43 AM
i think you can just take into account displacement of a 10" sub compared to a 12

coolahan
12-08-2006, 03:39 AM
subwoofertools.com


plug in the variables.. and bang.

PV Audio
12-08-2006, 07:13 AM
Use one of moe's plans, they're empty boxes with just port displacement taken into account.

Ran4it2
12-08-2006, 11:19 AM
so i can use any of moe's box plan and instead of cutting a hole for a 12 put my brother's 10?

PV Audio
12-08-2006, 09:35 PM
Bingo, just subtract your sub's displacement though.

Ran4it2
12-08-2006, 09:51 PM
substract my subs displacement??
im a little new to building boxes

matt_martin87
12-09-2006, 12:36 AM
Sub displacement is how much volume the sub occupies in the box.

ssj2xxgotenxx
12-09-2006, 12:38 AM
Are you going to wrap it up and put a bow on top?

Ran4it2
12-09-2006, 03:30 AM
yep a nice black wrapping paper with lollipops on it and real big nice purple bow

theothermike
12-09-2006, 12:05 PM
im guessing the lil 10" p1 wont have more than .1 displacement. probably around .08 or .07 is my guess

Mike

PV Audio
12-09-2006, 12:09 PM
^^ It is indeed a very small sub. I'd account for .1 though just to be on the safe side. It's better to have a lower tuning that you expect instead of a higher one. That is unless you're going for SPL, but with a P1 I doubt it. :)