PDA

View Full Version : Type R Box Builders



unrated
11-27-2006, 09:40 PM
hey guys i need a sub box design for 2 12" Type r's going in a 2000 chevy S10 ext Cab, ive been doing some research on here for size and im finding anywhere from 2.2 cubs to almost 5 cubes for the subs, anywyas i have lots of room to work with, 48L x 24h x 16w is rough size ... plz msg me for any questions...thx

rpfuror
11-28-2006, 09:04 AM
hey guys i need a sub box design for 2 12" Type r's going in a 2000 chevy S10 ext Cab, ive been doing some research on here for size and im finding anywhere from 2.2 cubs to almost 5 cubes for the subs, anywyas i have lots of room to work with, 48L x 24h x 16w is rough size ... plz msg me for any questions...thx

what freq?

rpfuror
11-28-2006, 11:01 AM
neway.

Here is a box built off the alpine specs, I calculated the net volume need to be 3 cu/ft per driver and tuned the port to 34Hz.

This will work with the dual 2ohm and dual 4ohm as the specs are very close.

Next time give this info upfront.

Box dimentions =

Width= 46.00 inches
Height= 24.00 inches
Depth= 14.00 inches
Port Length= 26.79 inches
Port Area= 89.00 sq/in

http://www.nodebweb.com/images/2x12tr6x34.JPG

unrated
11-28-2006, 03:11 PM
Thats awesome, thx alot