PDA

View Full Version : the official box building material thread



AlpineUser
11-18-2006, 12:55 PM
this is what you need to build a box
1. 3/4in MDF wood
2. wood glue
3. silicone
4. screws or nails screws are better IMO
5. counter sink bit so make the screws flush to the wood
6. screw gun
7. clamps (you may not use them or need them)
8. circular saw or table saw
9. router or jigsaw to cut the hole for you sub
10. a sharp pencil
11. measureing tape or yard stick
12. level
13. sander
14. carpet, paint, or vinyl
15. spray adhesive
16. razor knife
17. sand paper
18. terminal cup or bolts or just drill a hole for the wires to pass through then seal it

anyone add anything if i forgot somthin

Big Dee
11-18-2006, 01:07 PM
19. 90 angle clamps
20. Carpenters square

Rattlebrain
11-18-2006, 01:12 PM
Most important.... Beer

lilmaniac2
11-18-2006, 01:14 PM
why do u have to use mdf ??

Why not birch? Oak?

Also, if you want to make an official thread at least use capitalization and punctuation

danteBirosel
11-18-2006, 01:18 PM
why do u have to use mdf ??

Why not birch? Oak?

Also, if you want to make an official thread at least use capitalization and punctuation

He's a first timer in ca.com, what do u expect... :uhoh:

Big Dee
11-18-2006, 01:20 PM
why do u have to use mdf ??

Why not birch? Oak?

Also, if you want to make an official thread at least use capitalization and punctuation

You forgot to add proper spelling :cool:

lilmaniac2
11-18-2006, 01:21 PM
i want my 30 secs i took to read in post in this thread back

pwnt by pat
11-18-2006, 01:29 PM
WTF are you doing overcomplicating something so simple?
wood
t-square
2 angle clamps
glue
drill with bits
router with bits
sand paper
screws

AlpineUser
11-18-2006, 01:59 PM
i just made this real quick cause people always go im starting a box build what do i need and **** spelling