PDA

View Full Version : project pimpedout97: 4 15" mts walled off



Pages : [1] 2 3 4

pimpedout97x
11-14-2006, 09:03 PM
its going to be getting started shortly, robin already took measurements and everything yesterday, and i bought all the bolts, screws, glue, liquid nails, etc...(mounting hardware, etc)

i still need like 180 bux in MDF and some other stuff...(resin for the inside, etc)

anyways its for 4 15" mts, and as of now, the plan is 4 of the sundown audio 1500w amps (@ .5 on 16 volts) so itll deff be more than 1500w. im also reconing all 4 mts from dvc 2 ohm to dvc 1 ohm (one is a 12, needed a recone anyways, the other 15 has a slight hole in the surround, and the other 15, the basket is bent, so i might as well recone all 4 to dual 1's....btw i had a lil fun with the 12....involved a wall socket lol)

anyways, robin is supposed to chime in and post schetches in a few...he told me to start a thread so i did...we will post progress pics(as always) as its gets started.

i cant wait:D

hurry and post pics robin!

VJ

smd4life
11-14-2006, 09:05 PM
should get retarded...

pimpedout97x
11-14-2006, 09:05 PM
i hope so :)

Kenny Pollock
11-14-2006, 09:06 PM
congrats, when do you guys plan to actually get to work?

PESteele
11-14-2006, 09:06 PM
lol at first i thought you were gunna run all 4 off one sundown

vetkilr
11-14-2006, 09:07 PM
should get retarded...

So Fitting:laugh:

pimpedout97x
11-14-2006, 09:07 PM
kenny- soon.

PESteele- lol.

pimpedout97x
11-14-2006, 09:08 PM
robin is working on the design now btw.

Kenny Pollock
11-14-2006, 09:11 PM
cool, can't wait to see what you guys are workin' with :)

pimpedout97x
11-14-2006, 09:14 PM
me either :)

baseballer1100
11-14-2006, 09:19 PM
What resin you going to use?

tommyk90
11-14-2006, 09:21 PM
Why recone the subs to dual 1's? You can keep them as dual 2's....

smd4life
11-14-2006, 09:23 PM
Why recone the subs to dual 1's? You can keep them as dual 2's....

he needs .5 ohms...and one's a 12"

tommyk90
11-14-2006, 09:23 PM
he needs .5 ohms...and one's a 12"

He can get .5 ohms per amp with dual 2's. ;)

Kenny Pollock
11-14-2006, 09:24 PM
he needs .5 ohms...and one's a 12"
Wouldn't dual 2 subs yield a .5 ohm impedance with each strapped pair of SAZ-1500Ds? I don't know my impedances well, so don't flame me!

tommyk90
11-14-2006, 09:25 PM
Wouldn't dual 2 subs yield a .5 ohm impedance with each strapped pair of SAZ-1500Ds? I don't know my impedances well, so don't flame me!

Took the words right out of my mouth. ;)

I'm guessing he was figuring to run one amp per sub instead of strapping a pair of amps to a pair of subs.

Fattony911
11-14-2006, 09:26 PM
jesus........this could get loud

delvryboy
11-14-2006, 09:27 PM
just make sure it isn't a bottom port:blush:

pimpedout97x
11-14-2006, 09:28 PM
**** that is right...dual 2 can make a .5 load...robin did test the 2 15s though in his car on his DMM and both of them made higher than a 1 ohm load...idk wait til he posts in here...

pimpedout97x
11-14-2006, 09:29 PM
port will be in the middle

smd4life
11-14-2006, 09:29 PM
Wouldn't dual 2 subs yield a .5 ohm impedance with each strapped pair of SAZ-1500Ds? I don't know my impedances well, so don't flame me!

each amp would see .25 ohms

tommyk90
11-14-2006, 09:31 PM
each amp would see .25 ohms

Oops, thats right.

Not sure what I was thinking there. :crap:

pimpedout97x
11-14-2006, 09:33 PM
ya right now each of my subs is making 1 ohm, but its really making higher than an ohm, which is gay. i want as close to .5 as possible.

iamamp3pimp
11-14-2006, 09:33 PM
this got big quick.

whould be fun to read later.

smd4life
11-14-2006, 09:34 PM
Oops, thats right.

Not sure what I was thinking there. :crap:

meh i used to have 8 subs so it's driven into my brain, but everyone's brain farts sometimes

tommyk90
11-14-2006, 09:34 PM
ya right now each of my subs is making 1 ohm, but its really making higher than an ohm, which is gay. i want as close to .5 as possible.

Yeah, gay nominal impedences FTL.

My "dual 2 ohm" seXXX is actually dual 2.4. :crap:

Kenny Pollock
11-14-2006, 09:35 PM
Sorry for the confusion... I don't know my ohm loads at all. I need to learn it... it's a very valuable resource.

pimpedout97x
11-14-2006, 09:35 PM
so is a dual 1 recone really "dual 1" or is it gonna be higher as well?

ohms FTL

tommyk90
11-14-2006, 09:36 PM
so is a dual 1 recone really "dual 1" or is it gonna be higher as well?

ohms FTL

I'd ask RE before ordering.

lilmaniac2
11-14-2006, 09:36 PM
ohms law owns joo

lilmaniac2
11-14-2006, 09:36 PM
dual .7s = 1 ohm actually i think

iamamp3pimp
11-14-2006, 09:37 PM
congrats, when do you guys plan to actually get to work?

thanksgiving sounds nice.

lol

pimpedout97x
11-14-2006, 09:37 PM
fvck ohms.

lawl

NeverEnuffBass
11-14-2006, 09:37 PM
anyways its for 4 15" mts, and as of now, the plan is 4 of the sundown audio 1500w amps (@ .5 on 16 volts) so itll deff be more than 1500w. im also reconing all 4 mts from dvc 2 ohm to dvc 1 ohm (one is a 12, needed a recone anyways, the other 15 has a slight hole in the surround, and the other 15, the basket is bent, so i might as well recone all 4 to dual 1's....btw i had a lil fun with the 12....involved a wall socket lol)

Ah, looks liek you beat me to my new setup.... Only I'm gonna have 3,000 watts on each....If I don't run it at 17 volt :up2somet:

smd4life
11-14-2006, 09:37 PM
ohms law owns joo

he said no flames please...sheesh :)

Chevyaudio
11-14-2006, 09:37 PM
Oops, thats right.

Not sure what I was thinking there. :crap:

Silly tommy...Those sundownz might Fry with a .25 ohm load daily. I think I remember a kid running into problems with a .35 load daily. Also you might want to check with sundown about running them at .5 daily on 16 volts...just to make sure you are in the clear. Other than that, it should get loud, but it will be all in the build, walls take some engineering.

pimpedout97x
11-14-2006, 09:38 PM
dual .7s is 1.4 i believe.

maybe we should just stop lol...were confusing each other, and most importantly, me. lol

delvryboy
11-14-2006, 09:39 PM
since this is a ground pounder, i wouldn't run them any lower than 1ohm strapped.

pimpedout97x
11-14-2006, 09:39 PM
they will run up to 18v and theyve been tested @ .5 (12v tho) and it went into protection 2 times i believe, but it was over like a 5 hour period of testing

smd4life
11-14-2006, 09:39 PM
pimp will lead you on the right path...nothing to worry about :)

Kenny Pollock
11-14-2006, 09:40 PM
they will run up to 18v and theyve been tested @ .5 (12v tho) and it went into protection 2 times i believe, but it was over like a 5 hour period of testing
dual 2 subs = 1.4/coil
dual 1 subs = .7/coil

i hope :(

tommyk90
11-14-2006, 09:42 PM
Silly tommy...Those sundownz might Fry with a .25 ohm load daily. I think I remember a kid running into problems with a .35 load daily. Also you might want to check with sundown about running them at .5 daily on 16 volts...just to make sure you are in the clear. Other than that, it should get loud, but it will be all in the build, walls take some engineering.

Silly me, trix is for kids!

iamamp3pimp
11-14-2006, 09:46 PM
dual 2 subs = 1.4/coil
dual 1 subs = .7/coil

i hope :(

thats a fi philosophy....not always the case.





and



idk what vj said in the first post, but they arent going to be straped at all. according to Jacob, they will lose power if you strap them. they will be running at .5 each, and gain matched to each other.

pimpedout97x
11-14-2006, 09:47 PM
x2

if i even get sundowns.

2 warloads is also an option.

what else runs @ 16v daily?

Kenny Pollock
11-14-2006, 09:47 PM
thats a fi philosophy....not always the case.





and



idk what vj said in the first post, but they arent going to be straped at all. according to Jacob, they will lose power if you strap them. they will be running at .5 each, and gain matched to each other.dmm matched? and yeah, they're more efficient "un-strapped"

smd4life
11-14-2006, 09:49 PM
x2

if i even get sundowns.

2 warloads is also an option.

what else runs @ 16v daily?

how about 2 40.1's?

i don't know if they'll run at 16 volts daily, though

squeak12
11-14-2006, 09:50 PM
IA is rumored to make nearly double power on 16V. Memphis 4000s are also good on 16V IIRC

pimpedout97x
11-14-2006, 09:54 PM
i was thinkin about 40.1's, but they are the most expensive of the options. im trying to see what all i have to choose from.

its gonna be a while, im gonna have to borrow an amp from someone to get this going for the meet. prally trey. less than 3000w to all 4 mts FTL

(still need 16v alt, and whatever amps i get...)

baseballer1100
11-14-2006, 10:10 PM
I cant wait to see the design. Robin is the **** at making designs.

shawnfleming
11-14-2006, 10:12 PM
VJ find someone to buy my batts! I have 22 Brand New blue tops sitting now. :)

Chevyaudio
11-14-2006, 10:14 PM
The 40.1's come alive on 16v ;)

prochobo
11-14-2006, 10:15 PM
Wow why spend all that money on a 16v setup when you won't even be able to hear the difference? I mean it's going to be a daily driver, I don't see the point of 16v unless you're competing and from what I saw this weekend, running 16v makes a very small difference in the score. 3 of my teammates were doing 16v burps, minimal gains, if that. Not trying to flame, just trying to save you some dough, but do what you will.

Chevyaudio
11-14-2006, 10:17 PM
Wow why spend all that money on a 16v setup when you won't even be able to hear the difference? I mean it's going to be a daily driver, I don't see the point of 16v unless you're competing and from what I saw this weekend, running 16v makes a very small difference in the score. 3 of my teammates were doing 16v burps, minimal gains, if that. Not trying to flame, just trying to save you some dough, but do what you will.

Depends on the amps...Im not so sure what kind of increases the Sundowns get from 12/14 volts to 16. I know some amps love 16v...case in point, the IA 20.1 and 40.1 I think Someone got 5200 watts out of a strapped pair of 20.1s rising up to 4 ohms...so there are gains depending on the equipent.

pimpedout97x
11-14-2006, 10:17 PM
VJ find someone to buy my batts! I have 22 Brand New blue tops sitting now. :)

how much u asking each?

and i already have my 16v batts...i dont wanna drain out my 12v system...and i wanna get the most power outta my amps as possible. i may compete too...not alot though

pimpedout97x
11-14-2006, 10:18 PM
Depends on the amps...Im not so sure what kind of increases the Sundowns get from 12/14 volts to 16. I know some amps love 16v...case in point, the IA 20.1 and 40.1 I think Someone got 5200 watts out of a strapped pair of 20.1s rising up to 4 ohms...so there are gains depending on the equipent.

x2...in some cases i could use 2 amps on 16v and get the power i need, vs 12v and using 4 amps...itll prally balance out...

good example is the 20/40.1

Chevyaudio
11-14-2006, 10:19 PM
But I do agree 16v is pointless unless you are competing...or if you have dual alts...one that charges to 16v and one that charges your car. Otherwise you are going to be draining down batts while you ride around.

nVRuckus
11-14-2006, 10:23 PM
ya right now each of my subs is making 1 ohm, but its really making higher than an ohm, which is gay. i want as close to .5 as possible.

you mean each sub is reading 1.4ohms? because arent all MTs dual 1.4 or dual .7?

iamamp3pimp
11-14-2006, 10:25 PM
dmm matched? and yeah, they're more efficient "un-strapped"

gain matched = dmm matched.

iamamp3pimp
11-14-2006, 10:26 PM
x2...in some cases i could use 2 amps on 16v and get the power i need, vs 12v and using 4 amps...itll prally balance out...

good example is the 20/40.1

what the hell?



lmao

Chevyaudio
11-14-2006, 10:28 PM
in my opinion...ditch the 16v and either add 4 more sundowns (un realistic with 8 amps) or get some stronger amps...that will give each sub 2500-3k

pimpedout97x
11-14-2006, 10:32 PM
i am running a seperate 16v alt.

iamamp3pimp
11-14-2006, 10:34 PM
in my opinion...ditch the 16v and either add 4 more sundowns (un realistic with 8 amps) or get some stronger amps...that will give each sub 2500-3k

the sundowns will do close to that @ .5 on 14v


from waht ive read anyway

pimpedout97x
11-14-2006, 10:34 PM
what the hell?



lmao

stfu idk

iamamp3pimp
11-14-2006, 10:35 PM
http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/11.jpg

iamamp3pimp
11-14-2006, 10:35 PM
thats a really crappy picture....

Chevyaudio
11-14-2006, 10:36 PM
the sundowns will do close to that @ .5 on 14v


from waht ive read anyway



not with the rise he will be seeing...and I dont think they will jump 1k from 1ohm to .5...that is unless they are extremely underrated...

pimpedout97x
11-14-2006, 10:39 PM
supposedly they come alive @ .5...and on 16v....more alive...

thats gonna **** man to waste all that wood filling in the floor, i dont even wanna look at it.

anyone got any other ideas lol

iamamp3pimp
11-14-2006, 10:43 PM
http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/02.jpg


changed it to 43 inches

pimpedout97x
11-14-2006, 10:47 PM
:(

iamamp3pimp
11-14-2006, 10:57 PM
http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/13.jpg

pimpedout97x
11-14-2006, 11:06 PM
broo thats sooooo much mdf wasted...................

im gonna cry

Chevyaudio
11-14-2006, 11:09 PM
The rearend of your truck is going to sag...:fyi:

Kenny Pollock
11-14-2006, 11:09 PM
broo thats sooooo much mdf wasted...................

im gonna cry
Are you guys seriously using that much MDF for the floor? That's like 500lbs of extra weight!

iamamp3pimp
11-14-2006, 11:09 PM
Are you guys seriously using that much MDF for the floor? That's like 500lbs of extra weight!

?

its like 3 sheets max.

iamamp3pimp
11-14-2006, 11:10 PM
minus the dance floor

iamamp3pimp
11-14-2006, 11:10 PM
i mean you can get a metal frame welded in, and bolt to that if you wanna, but i doubt it.

lol

pimpedout97x
11-14-2006, 11:13 PM
i thought about that

but yea, no.

lol that diagram makes it look like an assload though...i think we should build in the hole instead of filling it lol

pimpedout97x
11-14-2006, 11:13 PM
did david wall his explorer? if so, how did he?

Kenny Pollock
11-14-2006, 11:15 PM
?

its like 3 sheets max.
Looked like 13 to me from that pic

Chevyaudio
11-14-2006, 11:15 PM
im confused on how that base is only 3 sheets...its ~13 layers thick, and 60x43 (an MDF sheet is 49x97")

pimpedout97x
11-14-2006, 11:20 PM
its not 13 full sheets...the top layer is the only one thats closest to a full sheet. the others will be cut, its just to fill in where my rear bench was to get it level with the cargo floor. like he said, like 3 sheets max.

u can kinda see the dip here: (below those black panels) it needs to be level with the cargo floor

http://img.photobucket.com/albums/v171/pimpedout92x/cargo2.jpg

pimpedout97x
11-14-2006, 11:22 PM
http://img.photobucket.com/albums/v171/pimpedout92x/131.jpg

only the red, it doesnt go all the way thru.

Kenny Pollock
11-14-2006, 11:27 PM
Ah okay, makes sense then.

iamamp3pimp
11-14-2006, 11:31 PM
Looked like 13 to me from that pic

umm.

no

NG

lol

-Robin

pimpedout97x
11-14-2006, 11:48 PM
were all waiting robin.............i know **** well you aint workin so design my box or ill tell luke that u design on the job! lol

iamamp3pimp
11-15-2006, 12:05 AM
you cant tell him what he already knows fool


<--- is protected.

and

shut up

n00bix

iamamp3pimp
11-15-2006, 12:06 AM
ok here we go.

this is in no way final. but it will give you a good idea (without the beauty panels naturally) of just what this might end up looking like.

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/16.jpg

Trple baffed the back because thats where the amps are going

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/17.jpg

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/18.jpg

iamamp3pimp
11-15-2006, 12:14 AM
i wonder if his truck will sway.

thats something i never thought of.....i guess there is onle one way to find out...

pimpedout97x
11-15-2006, 12:16 AM
sway? lol

baseballer1100
11-15-2006, 12:17 AM
This is going to be nasty. I cant wait. Talk about one hell of a build up.

pimpedout97x
11-15-2006, 12:22 AM
can any of you believe this is my first system ever and im only 18 LOL

ya ill be in debt by 21.

iamamp3pimp
11-15-2006, 12:32 AM
just dont put your *** against it feg

Pyro_By_Nature
11-15-2006, 03:27 AM
ok here we go.

this is in no way final. but it will give you a good idea (without the beauty panels naturally) of just what this might end up looking like.

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/16.jpg

Trple baffed the back because thats where the amps are going

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/17.jpg

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/18.jpg


To save weight, and some materials cost, have you considered a 2x4 (or 2x6) and birch frame to hold and raise it up? Just a suggestion.

iamamp3pimp
11-15-2006, 04:47 AM
considered, yes.

thought of a way to make it work?

nope.

help me out a little on what you mean.

sundownz
11-15-2006, 06:39 AM
not with the rise he will be seeing...and I dont think they will jump 1k from 1ohm to .5...that is unless they are extremely underrated...

Loyd will be doing some testing soon... probably today. That should answer some questions on power output.

pimpedout97x
11-15-2006, 11:35 AM
post the results up in this thread :)

and elaborate on the 2x4 and birch floor...i want to hear as well.

prochobo
11-15-2006, 11:49 AM
Use the imagination

One sheet for the floor. Use 2x4's as lifts, put another sheet of of MDF on top of that and there you go, a floor.

May want to go thicker on the wall. Triple all the way!

kbkid
11-15-2006, 12:02 PM
I wish you luck VJ. You sure have talked alot the past few month(s) about different systems and ideas, I'm finally glad something is getting done. Come post if up on explorerx so they can see it.

pimpedout97x
11-15-2006, 12:05 PM
that sounds like it'd be unsafe/unsecure with just 2x4's hold up the wall with all 4 mts right above it...what about in a head on collision?

prochobo
11-15-2006, 12:37 PM
that sounds like it'd be unsafe/unsecure with just 2x4's hold up the wall with all 4 mts right above it...what about in a head on collision?

It's no different than if you were to stack all of that MDF on top of each other. . . Read what I wrote. You're basically making a box, with MDF on the top and bottom and 2x4's in the middle to raise it.

The only way it would be dangerous is if you didn't attach the 2x4's to the MDF, but who would do that?

pimpedout97x
11-15-2006, 12:53 PM
wouldnt you think solid pieces of MDF stacked up would be more sturdy than vertical 2x4's?

Chevyaudio
11-15-2006, 12:56 PM
Loyd will be doing some testing soon... probably today. That should answer some questions on power output.

If they are impressive I might pick a few up...ya never know.

acold7dusta
11-15-2006, 01:36 PM
wouldnt you think solid pieces of MDF stacked up would be more sturdy than vertical 2x4's?

yes, but there is a point where its over doing it. to hold up a floor of a house they use horizontal 2x4s and that supports much more weight that your MTs

iamamp3pimp
11-15-2006, 02:15 PM
I think I knowvwhat prochobo is saying. ill draw it up today.

gotta remember that while yes houses are built that way, they don't have too stand uo to stop and go traffic as well as the potential for a crash. you build it, and it just kinda stays in place......a wall isn't the same concept, so its more of apples to oranges in this case.......but I think we might be able to lay out some 4x4's potentially.

ill see what I can comjure while I'm supposed to be workin today....

pimpedout97x
11-15-2006, 02:35 PM
lol ya do that while your supposed to be workin today;)

saywhat?
11-15-2006, 02:43 PM
i see it like this....how are you going to bolt down a 2x4 box. theres nothing inside of it, so therefore its literally bolting 1 piece os MDF to the floor, rather than 8 or 9. That obviously has more strength than a box.

pimpedout97x
11-15-2006, 02:56 PM
thats what were saying...thats why in the design he had all that mdf to level the floor...

iamamp3pimp
11-15-2006, 03:02 PM
i am in aggreance.

pimpedout97x
11-15-2006, 03:10 PM
yup

so when we gonna start, or when u gonna give me measurements to get the mdf...what u doing thanksgiving cuase well both be off and i dont have school....idk what im doing yet though

Pop da Hatch
11-15-2006, 03:19 PM
get some L shapped angle iron and bolt it to the frame of the 2 x 6 (I would use) and the other end to the frame of the explorer.

Unless of course you wanna just burn through the MDF.

iamamp3pimp
11-15-2006, 03:26 PM
im gonna use the MDF to bolt to the floor of the car thus far, and ill tell you the cuts that you need to make.

im working all 16's the week after thanksgiving, so it wont be then....we are gonna have to get started monday, or thursday if we cant get a ps3

NeverEnuffBass
11-15-2006, 07:06 PM
[QUOTE=iamamp3pimp;2443308]ok here we go.

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/pimpedout97x/16.jpg


That looks really familiar. :p:

2x4's are your friend when leveling the floor. Be sure to use plenty, I didn't use enough.

iamamp3pimp
11-15-2006, 07:37 PM
got pics?

pimpedout97x
11-15-2006, 07:43 PM
you guys think i should do one big box or 2 boxes built outside the car (like NeverEnufBass did with his 4 SX's)?

NeverEnuffBass
11-15-2006, 07:48 PM
got pics?

I didn't take any pics of the floor build up, sorry

iamamp3pimp
11-15-2006, 07:53 PM
its all good.

can you sketchup what you mean because im not fully understanding your suggestion

pimpedout97x
11-15-2006, 07:56 PM
I didn't take any pics of the floor build up, sorry

what size were your individual boxes? do you like how it came out (vs building one big box)

saywhat?
11-15-2006, 08:04 PM
another idea.....build your box right....and THEN INSIDE OF THAT put MDF down thick enough ~6 inches, to bolt down to the floor. cuz im guessing your floor is rather "flat" up until the drop off. If you bolt it down ever 8-10 inches on the back half, THEN 2x4's could be used to level it out, take strain off of those bolts, and you could tighten them that much more....

iamamp3pimp
11-15-2006, 08:04 PM
they were 15 cubes each.

pimpedout97x
11-15-2006, 08:42 PM
its all good.

can you sketchup what you mean because im not fully understanding your suggestion

x2 please

iamamp3pimp
11-15-2006, 08:44 PM
grant that doesnt make sense.

re iterate that 4 me please......with a cherry on it too.



sekhs

Kenny Pollock
11-15-2006, 08:45 PM
Some guy's selling 40.1s for a grand each just so you know ;) that's a VERY nice price, $400 off each.

80INCHES
11-15-2006, 08:49 PM
well i applied for another job..hopefully i will get it...if i do...i will be buying a suv and i will be doing a big setup
and yes it will be a bandpass.....4 q 18's .a 4th order bandpass wall
with about 585 sqaure inches of port tuned to 58hz
:up2somet: people feel i cant do my thing with trucks cuz i never had one...so in 2007 i'm about to show people wat i can do


80

saywhat?
11-15-2006, 08:50 PM
okay build your side pieces right.....get them fine and dandy. get your first floor piece right, then build up off that. jack it up with like a little automotive jack until its level. drill your holes, bolt it down with thread all or whatever that thick *** threaded stuff is called right. then tighten it down really tight. use a breaker bar if you have to get it REALLY tight.

then build your 2x4 supports for the front. you bolt down the back half to the floor, because thats all thats gunna lift in a crash, is the back half, or its all going to slide. no need to bolt the front half down.

iamamp3pimp
11-15-2006, 08:55 PM
Some guy's selling 40.1s for a grand each just so you know ;) that's a VERY nice price, $400 off each.

not a bad deal.

not a great deal either......4 20.1's can be had for less...

iamamp3pimp
11-15-2006, 08:56 PM
but to have those bolts in the front in the event of a crash might just save his life.

saywhat?
11-15-2006, 08:59 PM
physics doesnt exactly allow something to topple backwards in the event of something stopping suddenly with a forward/downward movement....(slamming on breaks and hitting someone)

i wouldnt worry about the front if you had 2 rows of 4 in the back, zig zag'd

iamamp3pimp
11-15-2006, 09:02 PM
for further clarification...what are the benefits of going 2x4's for the front mounting,?

saywhat?
11-15-2006, 09:29 PM
http://i2.photobucket.com/albums/y18/sacreddispute03/pimp.jpg

but as a box. front and back triangled, and anywhere else possible as well. triangles = strong. period.

pimpedout97x
11-15-2006, 09:31 PM
for further clarification...what are the benefits of going 2x4's for the front mounting,?

to take the stress off tha back bolts and to not use all that mdf i think. lol

im coming to ur desk now tho to explain lolol

Chevyaudio
11-15-2006, 09:32 PM
not a bad deal.

not a great deal either......4 20.1's can be had for less...

2 40.1s will do more power though ;)

iamamp3pimp
11-15-2006, 09:42 PM
im gonna have to agree with that

squeak12
11-15-2006, 09:47 PM
I myself would make a frame out of 2x4s spacing about every 12 or so inches on center then put mdf on the top and sides. And for the box I would make the box single baffle ports on one side not middle and the external bracing with 2x4s, another layer of mdf and fill it with foam.

explorer2
11-15-2006, 10:03 PM
Go to a local fabrication shop and have them throw together a frame, box tube for the supports to the floor and angle iron to set the box in and bolt it in. It would be much stronger and they could make most of it out of scrap so it would be cheap.

pimpedout97x
11-16-2006, 12:39 AM
i think ima get a couple 10ft 2x4's and do it that way. either way we may start tomorow or monday. prally monday knowing me, cuase tomorow im gonna go get some 2x4s and MDF.

Chevyaudio
11-16-2006, 11:42 AM
Go to a local fabrication shop and have them throw together a frame, box tube for the supports to the floor and angle iron to set the box in and bolt it in. It would be much stronger and they could make most of it out of scrap so it would be cheap.

Not a bad idea...Just to see what it would cost. Take the measurements you need to a local Metal/fab shop. And see what they would charge to throw together a quick frame. It would be the strongest best option. Nothing would compare if you had a Metal subframe for your wall.

pimpedout97x
11-16-2006, 04:38 PM
i just got 2 sheets of 3/4" mdf and 40 ft worth of 2x4 to build the floor. 50 bux.

baseballer1100
11-16-2006, 05:25 PM
2xfours are the cheap!!

pimpedout97x
11-16-2006, 05:53 PM
ya and i think itll hold up fine, i already talked about it with robin.

baseballer1100
11-16-2006, 06:08 PM
It should..I mean they do hold up houses?

pimpedout97x
11-16-2006, 07:21 PM
they do but again as robin said, houses dont move and stop and go in traffic...or get in accidents lol

it should hold fine.

if one day you notice i stop posting for a while, its prally cuase it didnt hold up and i died.

NeverEnuffBass
11-16-2006, 09:03 PM
they do but again as robin said, houses dont move and stop and go in traffic...or get in accidents lol

it should hold fine.

if one day you notice i stop posting for a while, its prally cuase it didnt hold up and i died.

You'll be fine, I haven't died from my 2x4's yet. knock on wood.

baseballer1100
11-16-2006, 09:41 PM
they do but again as robin said, houses dont move and stop and go in traffic...or get in accidents lol

it should hold fine.

if one day you notice i stop posting for a while, its prally cuase it didnt hold up and i died.

haha true.

pimpedout97x
11-19-2006, 03:15 PM
we should be starting the false floor tomorow, so pics will follow tomorow.

baseballer1100
11-19-2006, 03:16 PM
i cannot wait. This is going to be sweet.

pimpedout97x
11-19-2006, 03:32 PM
i cant wait either :)

baseballer1100
11-19-2006, 03:32 PM
So where is the actual floor going? Are you going to be building it where the seats are?

pimpedout97x
11-19-2006, 03:37 PM
ya the seats are actually on ebay right now, theyve been out of my truck, but ya the floor really is just to level it off with the height of the cargo floor so the wall can be on one flat surface. it would have been too hard to build the wall in the dip where the seats were and then go up to the cargo floor, etc...

my car smells like home depot inside cuase ive had mdf and 2x4s in it for 2 days lol

baseballer1100
11-19-2006, 03:39 PM
ya the seats are actually on ebay right now, theyve been out of my truck, but ya the floor really is just to level it off with the height of the cargo floor so the wall can be on one flat surface. it would have been too hard to build the wall in the dip where the seats were and then go up to the cargo floor, etc...
my car smells like home depot inside cuase ive had mdf and 2x4s in it for 2 days lol

Thats what i was wondering. I was thinking about doing that with 18s but then all that...

pimpedout97x
11-19-2006, 03:40 PM
you have an explorer?

edit: i take it you do as u post on explorer4x4.com lol

i used to post on explorer forums....fordexplorer.net, explorerx.com....not anymore tho...

baseballer1100
11-19-2006, 03:42 PM
you have an explorer?

edit: i take it you do as u post on explorer4x4.com lol

i used to post on explorer forums....fordexplorer.net, explorerx.com....not anymore tho...

yup not really an explorer but a mountaineer. So yeah i have an explorer. I think you could have done the wall without taking the back seats out. if i remember the trunk is like 36 inches high by 41 inches wide. But anyways its still going to be a cool setup...Did you put the seats on those forums? people normally eat that **** up.

pimpedout97x
11-19-2006, 03:45 PM
i very well could have, i just wanted to have the subs right behind me, plus i hate people in my car lol.

i dont know if you remember another explorer owner, he had a red 96 xlt, his name was explore_96xlt (mostly posted on FXN) but he had a wall with 4 15" crossfire bmf's and it got beat by mexi (another explorer member) with 2 12" sx's in the same body explorer....but the wall was behind the rear seats, and i just figured id do it up to the front seats :)

baseballer1100
11-19-2006, 03:46 PM
Thats a good point. No I dont remember that but thats nuts.

pimpedout97x
11-19-2006, 03:48 PM
www.cardomain.com/id/explore96xlt is his cardomain site i believe, he has an 02 explorer now that is just ******.........

baseballer1100
11-19-2006, 03:54 PM
**** thats nuts and he kind lives by me.

pimpedout97x
11-19-2006, 03:54 PM
what city u live in?

baseballer1100
11-19-2006, 03:55 PM
I really want to get the monotone paintjob.

baseballer1100
11-19-2006, 03:55 PM
Louisville its like 30-45 minutes away i think.

pimpedout97x
11-19-2006, 03:56 PM
pics of ur mounty?

baseballer1100
11-19-2006, 03:57 PM
soon. im in the rebuilding stage? :p:

pimpedout97x
11-19-2006, 04:03 PM
nice

baseballer1100
11-19-2006, 04:06 PM
Fo sho. So how about you start on this so i can get some ideas?

pimpedout97x
11-19-2006, 04:09 PM
hahaha tomorow starts the floor!

baseballer1100
11-19-2006, 04:09 PM
Im pumped!!!

baseballer1100
11-19-2006, 04:22 PM
How dark exactly is your car?

iamamp3pimp
11-19-2006, 04:32 PM
double limo and triplelimo in the back, with single limo in the front.

pimpedout97x
11-19-2006, 05:07 PM
rear doors and back = a little darker than double 5% (stock tint is like 20%)

front doors = double 5%

windshield = 5% with double 5% glare strip.

yes im insane.

pimpedout97x
11-19-2006, 05:08 PM
..delete

iamamp3pimp
11-19-2006, 05:29 PM
its really nice inside there tho in the daytime.

pimpedout97x
11-19-2006, 05:45 PM
hell ya and its like a cave at night lol

baseballer1100
11-19-2006, 05:46 PM
Thats kind of what i want to do. Robin how did those sites work out?

pimpedout97x
11-19-2006, 05:49 PM
what sites

baseballer1100
11-19-2006, 05:51 PM
Its top secret :p: on a more serious note how hard is it to see at night?

pimpedout97x
11-19-2006, 05:56 PM
not tellin til u list teh sites

baseballer1100
11-19-2006, 06:47 PM
alright fine.....
http://www.woodzone.com/tips/sharpening_router_bits.htm
http://www.highlandwoodworking.com/index.asp?PageAction=Custom&ID=32
http://www.woodworking.com/article_archive.cfm?section=1&article=1474

pimpedout97x
11-19-2006, 06:57 PM
lol i was just fkn with u...

anyways its hella hard to see out the windows. im used to it though as i drive all the time at night with it.

what i do have trouble in is the rain at night. thats when my car is a threat to anyone on the road lol

baseballer1100
11-19-2006, 07:00 PM
Yeah. I feel that i have 5 over 20 all around except for the front and i cant see ****. but o well. I want to get like 35 on the front. Just wondering thanks man.

pimpedout97x
11-19-2006, 07:17 PM
get like 9 layers of 5% its not that dark

baseballer1100
11-19-2006, 07:18 PM
get like 9 layers of 5% its not that dark

Thought abouut that too. I guess ill go tommorow and get that.

Mike Troll
11-19-2006, 07:23 PM
12 pages and still no work.....get to work you lazy bastard.

pimpedout97x
11-19-2006, 07:28 PM
u notice the 1st 11 pages were "thats gonna be cool" "cant wait to see it"

"here is a pic of the design"

stfu n00b u still have whatever youve been talking about since forever since ive known you lol now u have a maza 6 wtf!

lol jk but on the real were starting tomorow leveling off the floor, deffinetly will have pics.

mike, u goin to the dec 30th meet?

pimpedout97x
11-19-2006, 07:47 PM
Thought abouut that too. I guess ill go tommorow and get that.

sweet.

baseballer1100
11-19-2006, 07:48 PM
yeah 9 layers should do the trick...

97cavy
11-19-2006, 08:43 PM
take lots of pics, gonna be doing a wall in the spring, its just tooo **** cold to work on anything for the time being. I think im gonna do a clamshell type design, 2 on top, 2 on bottom, port in the middle running from side to side

pimpedout97x
11-19-2006, 08:50 PM
idk if you say but on page 6 or 7 i think is the design of mine, the same thing as urs will be cept my port will be up and down.

im also gonna be doing this (fiberglassing around the top, bottom, and sides to seal it off completely from the back of the car)

http://img.photobucket.com/albums/v171/pimpedout92x/untitled.jpg

http://img.photobucket.com/albums/v171/pimpedout92x/untitled1.jpg

http://img.photobucket.com/albums/v171/pimpedout92x/untitled12.jpg

iamamp3pimp
11-19-2006, 08:54 PM
lol.

i like your rendition of us

"i'm"

:(

pimpedout97x
11-19-2006, 08:56 PM
sorry *****

*robin and i*

97cavy
11-19-2006, 08:57 PM
Im doing something based off of this design i think, still not sure and I change my mind all the time

http://img.photobucket.com/albums/v324/tprj5/150db%20blazer/allsubsin.jpg

Except only the first row of subs, and a port

pimpedout97x
11-19-2006, 08:57 PM
nice

9512ds
11-19-2006, 10:02 PM
so how deep is the wall?

pimpedout97x
11-19-2006, 10:13 PM
idk robin has the design not me lol

but about mid way of the rear cargo side windows

9512ds
11-19-2006, 10:18 PM
k cool

AlpineUser
11-19-2006, 10:23 PM
i dont know if you said but whats it tuned to?

pimpedout97x
11-19-2006, 10:28 PM
i think he said around 30-33.

baseballer1100
11-19-2006, 10:30 PM
Gonna get low. I think you might have to make a new thread to keep it from getting confusing :p: just a thought.

pimpedout97x
11-19-2006, 10:35 PM
prally will

the mts dont hit the lows that well anyways....my next car (mustang, soon) i want something that sounds good, loud, and hits lows really really good.

baseballer1100
11-19-2006, 10:35 PM
Sweet. You going to do anything to the exterior of the car?

pimpedout97x
11-19-2006, 10:41 PM
tons.

with time. lol

ive got a full airride setup sitting in my room...

baseballer1100
11-19-2006, 10:42 PM
dam you. Rims?

vetkilr
11-19-2006, 10:46 PM
prally will

the mts dont hit the lows that well anyways....my next car (mustang, soon) i want something that sounds good, loud, and hits lows really really good.

Sweet you can get my DMX and the 3.0 box robin made.

pimpedout97x
11-19-2006, 10:47 PM
lmao ill buy one and have him make the same box and u can keep urs:laugh:

ya i have rims planned, just wont have em for a long *** time lol

vetkilr
11-19-2006, 10:49 PM
lmao ill buy one and have him make the same box and u can keep urs:laugh:

ya i have rims planned, just wont have em for a long *** time lol

Good you can pay 200 more then Im sellin it for then:p:

baseballer1100
11-19-2006, 10:49 PM
Same here. I would rather have audio over rims right now.

TreyE
11-19-2006, 10:53 PM
Vj = teh ghey....14 pages and nothing....you homo hey umm i dont think AJs box is gunna fit in his car...we are trying tomorrow again but idk he said he tried and it wouldnt go....iam3pimp bro you sure this baby will fit in his mustang??

pimpedout97x
11-19-2006, 10:55 PM
god ****it were starting the floor tomorow!!!!!!!!!!!!!!!!!!!!!!

and that ***** about AJ lol.

i forgot to tell robin about it, hell prally see this thread tonite or ill tell him tomorow when im at his house

TreyE
11-19-2006, 10:56 PM
god ****it were starting the floor tomorow!!!!!!!!!!!!!!!!!!!!!!

and that ***** about AJ lol.

i forgot to tell robin about it, hell prally see this thread tonite or ill tell him tomorow when im at his house

no bro ***** for robin if it doesnt fit lol

baseballer1100
11-19-2006, 10:58 PM
**** dude i just saw how heavy this **** thing is gonna be.

Chevyaudio
11-19-2006, 10:58 PM
Amprack in the back right...behind the wall? Should get loud. Any thoughts on what you want to do with this setup?

pimpedout97x
11-19-2006, 11:17 PM
be loud?

9512ds
11-19-2006, 11:23 PM
lol good answer

pimpedout97x
11-20-2006, 03:19 PM
we made pretty good progess today (mostly robin lol) but he has alot of pics that hell post prally tonite...it doesnt look like much, but we were gonna rush it and have me die in a wreck (although i will prally still die lol)

but again it was pretty time consuming with how the floor was and getting the bolts through the floor and everything...but its really tight and secure and i dont think itll go anywhere unless i get in a pretty bad head on collision. but he will post pics tonight.

Chevyaudio
11-20-2006, 03:26 PM
LOL...at you always assuming you will die. Sounds good. I finished the 2340923840239 thousandth box for the BTL today...see if I cant find a few DeeeBeees in this one.

iamamp3pimp
11-20-2006, 03:26 PM
Vj = teh ghey....14 pages and nothing....you homo hey umm i dont think AJs box is gunna fit in his car...we are trying tomorrow again but idk he said he tried and it wouldnt go....iam3pimp bro you sure this baby will fit in his mustang??

extremely.

if it doesnt then i have no choice but to rebuild it.

pimpedout97x
11-20-2006, 03:27 PM
i think we can get it to fit

vetkilr
11-20-2006, 03:32 PM
i think we can get it to fit

"Think" is the word of the Day:naughty:

pimpedout97x
11-20-2006, 03:36 PM
lmao i herd u gettin another box u rich bastard stop changing and stick with one! lol

vetkilr
11-20-2006, 03:53 PM
lmao i herd u gettin another box u rich bastard stop changing and stick with one! lol

If I could Wall then I wouldnt need so many lil box's:laugh:

Mike Troll
11-20-2006, 04:01 PM
15 pages and still no pictures...I know you have a camera VJ take some **** pics....especially if Robin is doing all the work.

pimpedout97x
11-20-2006, 04:04 PM
hey i helped spread the glue LOL

i ordered the pizza too

his cam has all the pics though. just wait til tonight u impatient bastard

iamamp3pimp
11-20-2006, 04:07 PM
yeah hes bad at this whole help me out stuff.

he stands there and attracts gays

vetkilr
11-20-2006, 04:10 PM
yeah hes bad at this whole help me out stuff.

he stands there and attracts gays

:laugh:

Dont forget that lil pic I got the last time I was there:naughty:

iamamp3pimp
11-20-2006, 04:14 PM
you scared off gays.

i seen more pink shirts when Veeeeeg was around

pimpedout97x
11-20-2006, 07:37 PM
lmao

baseballer1100
11-20-2006, 11:07 PM
Any news?

pimpedout97x
11-20-2006, 11:10 PM
robin should be home from work in like 30 min and he better post pics!

baseballer1100
11-20-2006, 11:33 PM
Yesssssss

coolahan
11-21-2006, 03:43 AM
no pics and 16 pages? delete this **** thread and start a new one!!! ridiculous lol..

pimpedout97x
11-21-2006, 07:11 AM
kenny's thread is on 26 and no pics, stop complaining

baseballer1100
11-21-2006, 09:04 AM
No update :(

Kenny Pollock
11-21-2006, 09:07 AM
kenny's thread is on 26 and no pics, stop complainingi started my thread with the intent to have a place to get suggestions and all, i already told everyone a new thread will be started when i have pics.

saywhat?
11-21-2006, 09:08 AM
kenny's thread is on 26 and no pics, stop complaining

people also know kenny has started (and almost finished).

baseballer1100
11-21-2006, 09:11 AM
I cant wait to see both of these threads its going to be the ****.

pimpedout97x
11-21-2006, 12:20 PM
Ok and robin and myself know that I have started. When he posts pics, yall will see it. Its hardely nothing yet, as we both have long work schdules and are both working OT after thanksgiving so we won't be doing anything else until not next monday, but the one after that. Be patient.

baseballer1100
11-21-2006, 12:24 PM
I feel ya big nuts...

smd4life
11-21-2006, 12:26 PM
:sneaky:

Kenny Pollock
11-21-2006, 12:30 PM
I feel ya big nuts...Is there something I should know about?

vetkilr
11-21-2006, 12:42 PM
I feel ya big nuts...

Yeah but they are hollow:laugh:

nVRuckus
11-21-2006, 12:58 PM
Yeah but they are hollow:laugh:

like the chocolate easter bunnies?

baseballer1100
11-21-2006, 01:30 PM
Is there something I should know about?

Not really its just a saying maybe i should change that:crap:

smd4life
11-21-2006, 01:34 PM
pimp...what amps did you decide on?

pimpedout97x
11-21-2006, 02:42 PM
same as kenny, 4 sundown saz-1500d's

although i think i change my mine as much as he does so....im not 100% sure yet hahaha

but pretty much im set on those, doubt ill have em by the meet though.

baseballer1100
11-21-2006, 02:43 PM
**** thats gonna be nuts. Yet ****

pimpedout97x
11-21-2006, 02:50 PM
kinda makes me mad tho how hell have 2 subs with 4 amps and ill have 4 subs with 4 amps.

robin also may get 4 of these (for 2 mts, prally 18s)

that means i should get 8 hehehe

again mine will be on 16v not a 12v system.

baseballer1100
11-21-2006, 02:52 PM
kinda makes me mad tho how hell have 2 subs with 4 amps and ill have 4 subs with 4 amps.

robin also may get 4 of these (for 2 mts, prally 18s)

that means i should get 8 hehehe

again mine will be on 16v not a 12v system.

**** group buy on sundown audio?

vetkilr
11-21-2006, 03:54 PM
kinda makes me mad tho how hell have 2 subs with 4 amps and ill have 4 subs with 4 amps.

robin also may get 4 of these (for 2 mts, prally 18s)

that means i should get 8 hehehe

again mine will be on 16v not a 12v system.

I might get 4 for one sub:naughty:

baseballer1100
11-21-2006, 04:03 PM
I might get 4 for one sub:naughty:

Seriously?

vetkilr
11-21-2006, 04:04 PM
Seriously?

thinkn bout it:up2somet:

Kenny Pollock
11-21-2006, 04:05 PM
I'm not changing my mind... already bought four 1500Ds, a 100.4 and a 100.2 :yumyum:

VJ, why are you going with 16v for daily if you don't mind me asking? I never even considered it because I don't think it's too practical... but I don't know much about it.

Edit: also, a little off topic... Robin should stay with his 15's, it was a ***** to get fit two 18s in my car, and my car is MUCH bigger than his.

baseballer1100
11-21-2006, 04:09 PM
thinkn bout it:up2somet:

That would be nuts.

vetkilr
11-21-2006, 04:10 PM
I'm not changing my mind... already bought four 1500Ds, a 100.4 and a 100.2 :yumyum:

VJ, why are you going with 16v for daily if you don't mind me asking? I never even considered it because I don't think it's too practical... but I don't know much about it.

Edit: also, a little off topic... Robin should stay with his 15's, it was a ***** to get fit two 18s in my car, and my car is MUCH bigger than his.

pm

vetkilr
11-21-2006, 04:11 PM
That would be nuts.

thats the point:naughty:

baseballer1100
11-21-2006, 04:12 PM
I meant to say your nuts. lol

vetkilr
11-21-2006, 04:13 PM
I meant to say your nuts. lol

:laugh:

iamamp3pimp
11-21-2006, 04:47 PM
I'm not changing my mind... already bought four 1500Ds, a 100.4 and a 100.2 :yumyum:

VJ, why are you going with 16v for daily if you don't mind me asking? I never even considered it because I don't think it's too practical... but I don't know much about it.

Edit: also, a little off topic... Robin should stay with his 15's, it was a ***** to get fit two 18s in my car, and my car is MUCH bigger than his.

i gotta check out pics...i havent looked.

did u post em yet?

iamamp3pimp
11-21-2006, 04:48 PM
kenny ur doing it differently tho.

i have 38 inches wide that i can go to.

i just gotta pull out the current setup first.

pimpedout97x
11-21-2006, 04:51 PM
robin post pics u hoe! lol

smd4life
11-21-2006, 04:52 PM
quit posting if you don't have pics...

Kenny Pollock
11-21-2006, 04:54 PM
i gotta check out pics...i havent looked.

did u post em yet?No pics yet


kenny ur doing it differently tho.

i have 38 inches wide that i can go to.

i just gotta pull out the current setup first.
True, true... come to think of it, I could've just did it the way you did it because I'm not burping, I'm doing Bass Race now. Oh well, it'll be louder than yours :p:

pimpedout97x
11-21-2006, 04:56 PM
Oh well, it'll be louder than yours :p:

lol

Kenny Pollock
11-21-2006, 04:58 PM
lol
awaiting Robin's comeback

pimpedout97x
11-21-2006, 04:59 PM
lol again

nVRuckus
11-21-2006, 05:02 PM
umm you do know running 16v on a daily driver will fry your electrical right?? only people that run 16v are trailer queens or external regulators that voltage it up for burps then back down right after.

pimpedout97x
11-21-2006, 05:05 PM
VJ, why are you going with 16v for daily if you don't mind me asking? I never even considered it because I don't think it's too practical... but I don't know much about it.

honestly i dont know, but i got the 4 batts for 400 shipped, theyre pretty much new, so i just did it. i figure ill have all the power on a seperate circuit, wont have to worry about dimming lights or anything.

pimpedout97x
11-21-2006, 05:06 PM
umm you do know running 16v on a daily driver will fry your electrical right?? only people that run 16v are trailer queens or external regulators that voltage it up for burps then back down right after.

dude wtf ive said like 80827345 times im getting a 16v alt! that doesnt mean im not gonna have a 12v alt as well!

think people!

nVRuckus
11-21-2006, 05:24 PM
obviously I think more than you because I posted the obvious which no one else bothered to post most likely to laugh if you fry your system. You never posted running dual alts that I remember reading you just kept saying you were running 16v which will fry your cars electrical and most people dont realize ;)

iamamp3pimp
11-21-2006, 05:31 PM
No pics yet


True, true... come to think of it, I could've just did it the way you did it because I'm not burping, I'm doing Bass Race now. Oh well, it'll be louder than yours :p:

i can neither confirm, nor deny.

but we will see.

pimpedout97x
11-21-2006, 05:33 PM
obviously I think more than you because I posted the obvious which no one else bothered to post most likely to laugh if you fry your system. You never posted running dual alts that I remember reading you just kept saying you were running 16v which will fry your cars electrical and most people dont realize ;)

come on you really couldnt have thought that i was gonna run everything on 16v could u? if you did....sorry but um...ya im kinda not that dumb...

pimpedout97x
11-21-2006, 05:33 PM
and most people dont realize ;)

I'm not most people.

nVRuckus
11-21-2006, 05:35 PM
to me you are since I dont know you from anyone else ;) this is the fiurst time Ive posted to you on this forum LOL

iamamp3pimp
11-21-2006, 05:37 PM
**** vj chill for a minute.

iamamp3pimp
11-21-2006, 05:37 PM
to me you are since I dont know you from anyone else ;) this is the fiurst time Ive posted to you on this forum LOL

he isnt.

but he is a n00bix kinda

pimpedout97x
11-21-2006, 05:56 PM
Lmao I'm a n00bix at work...you know that robin. Lol

I aint mad ruckus I'm just getting annoyed from the fegs saying "page 17 no pics, wtf"

Kennys thread got to 30 and he still hasent posted pics. Not saying its not built, I'm just comparing my thread to his. Ill prally make a new thread anyways since this is all spam. This was just to let everyone know that we were starting. And yall should be asking robin for pics not me hahaha

saywhat?
11-21-2006, 06:04 PM
I'm not most people.

your one person of many. there are tons of idiots around, and we dont know if your in that group or not.....we dont know you.

saywhat?
11-21-2006, 06:05 PM
Lmao I'm a n00bix at work...you know that robin. Lol

I aint mad ruckus I'm just getting annoyed from the fegs saying "page 17 no pics, wtf"

Kennys thread got to 30 and he still hasent posted pics. Not saying its not built, I'm just comparing my thread to his. Ill prally make a new thread anyways since this is all spam. This was just to let everyone know that we were starting. And yall should be asking robin for pics not me hahaha

when you must compare your things to others, is when you go wrong in your "journey"

pimpedout97x
11-21-2006, 06:06 PM
comparing a thread to another thread? im not comparing my wall/sub/install to his...

/thread til pics are up. bye.

tommyk90
11-21-2006, 06:13 PM
umm you do know running 16v on a daily driver will fry your electrical right?? only people that run 16v are trailer queens or external regulators that voltage it up for burps then back down right after.

Umm, you do know it is possible to run a 16v system just for the subwoofer amps right?

It just requires a battery charger. ;) Not as convenient as running dual alts (or a 16v alt with step-down modules for the car) but it is much cheaper and easier to do.

iamamp3pimp
11-21-2006, 06:14 PM
too much animosity.

Chevyaudio
11-21-2006, 06:29 PM
Im gonna be louder with 1 12"



lol...had to add to the tension.

iamamp3pimp
11-21-2006, 06:48 PM
lol


no reason for ension in the first place, but thats just imo

baseballer1100
11-21-2006, 08:15 PM
Umm, you do know it is possible to run a 16v system just for the subwoofer amps right?

It just requires a battery charger. ;) Not as convenient as running dual alts (or a 16v alt with step-down modules for the car) but it is much cheaper and easier to do.

You saying just get a charger and then run them? Thats what i was going to do but i never got my charger:crap:

pimpedout97x
11-21-2006, 08:42 PM
im gonna have an alt for them, and the stock alt for my red top and the rest of the car

Wkbdkid
11-21-2006, 08:46 PM
Any suspension upgrades to accomadate for all the weight?

tommyk90
11-21-2006, 08:49 PM
You saying just get a charger and then run them? Thats what i was going to do but i never got my charger:crap:

Get a bank of 8v batteries wired into series.

Thats what mark potts did last year, and one of my other teammates did this year. Six 8v batteries wired into three 16v banks. They would play for a couple days full tile before the batteries would need a recharge.

If two alts is possible on your car, I would definitely go for it. Less worries about battery maintenance and whatnot.

kickinaudio
11-21-2006, 08:51 PM
umm you do know running 16v on a daily driver will fry your electrical right?? only people that run 16v are trailer queens or external regulators that voltage it up for burps then back down right after.

I have an external regulator, and I'm on 12v. Your post makes no sense.

He's going to build it however the hell he wants, so there is no point in questioning anything.

pimpedout97x
11-21-2006, 08:52 PM
Any suspension upgrades to accomadate for all the weight?

ive actually got a complete air bag setup chillin in my closet....just not put in yet...thats a while down the rode, i need a new DD 1st

NeverEnuffBass
11-21-2006, 08:59 PM
ive actually got a complete air bag setup chillin in my closet....just not put in yet...thats a while down the rode, i need a new DD 1st

I need bags :mad: . Too bad my Durango is 4 wheel drive or else I'd have it slammed already.

explorer2
11-21-2006, 09:00 PM
Is there any dual alt setups available for the 302? If your planning on bags down the road I would replace the stock alt with a 16 volt one with a regulator/transformer for the stock electrical and then mount a york compressor where you want to mount your second alt.

pimpedout97x
11-21-2006, 09:05 PM
here i took 2 pics. i told you all its nothing much, not even a full days work...and we cant work on it again until monday the 4th...

pimpedout97x
11-21-2006, 09:06 PM
http://img.photobucket.com/albums/v171/pimpedout92x/floor1.jpg

http://img.photobucket.com/albums/v171/pimpedout92x/floor2.jpg

pimpedout97x
11-21-2006, 09:07 PM
oh-

thats not going anywhere, its so tight and secure...

baseballer1100
11-21-2006, 09:10 PM
Woot Pics!!

pimpedout97x
11-21-2006, 09:12 PM
lol robin has alot though i wish he'd post em...

it really was time consuming and the very bottom, there was only 2 mounting points on each side...

baseballer1100
11-21-2006, 09:13 PM
Cant wait to see them all.

pimpedout97x
11-21-2006, 09:15 PM
me either.

explorer2
11-21-2006, 10:10 PM
Should have gone a little bit farther or fabbed some brackets to utilize that seat mount stud.

Kenny Pollock
11-21-2006, 10:14 PM
Looking good, it's definitely a nice start :)

baseballer1100
11-21-2006, 10:48 PM
can you take the bottom part of the seat off without taking the whole seat out?

97cavy
11-21-2006, 10:49 PM
What exactly did you mount the bottom too?

When i started a wall, I used the seat bolts, both on the floor, and the ones right next to the door but it just didnt seem to safe to me..

iamamp3pimp
11-21-2006, 10:55 PM
thru the floor.

iamamp3pimp
11-21-2006, 10:55 PM
usint 1/2 inch bolts