View Full Version : Box Reconstruction

11-10-2006, 11:58 AM
I was wondering if there is an easy way to make a box smaller without cutting it up. I built a box for my 12SX a few months ago when I was bored, and now I got an amp comming and the box is a little too big. It is 3 cubes so not huge. Is there something easy to glue, screw, stuff into it to make the volume less.

11-10-2006, 11:59 AM
Forgot to add that it is at 32hz.

Big Dee
11-10-2006, 12:01 PM
You could try gluing in some pieces fo MDF in there to form a wall. Or fiberglassing would work also, but if you don't want to do any cutting you probably don't want to do any of that either. Anything that you can fit in there and screw down will take up space.

11-10-2006, 12:06 PM
You can add some 2x4's internally.

pwnt by pat
11-10-2006, 12:11 PM
changing internal volume will affect tuning. ygpm

11-10-2006, 02:29 PM
it would probably be worth your while to just build a new box