PDA

View Full Version : need something thats gonna be just temporary..



MA$E
11-08-2006, 12:21 AM
i got a ported box made for 2 15" L7's.. one is blown so i had to take it out...and now i have a pointless box, the air just comes right out. is there anything i can do to cover the hole? i tried a piece of MDF but it just rattles like crazy....anything i can do?

baseballer1100
11-08-2006, 12:22 AM
build a new box..did you try to glue the mdf on or what?

MA$E
11-08-2006, 12:23 AM
^^^^no i didnt glue it on, like i said it just temporary

baseballer1100
11-08-2006, 12:26 AM
Well i dont think there is a temporary fix then. or none that i can think of

AJē06
11-08-2006, 12:26 AM
Stick thru it SON!

;)

Reit38
11-08-2006, 12:28 AM
what about making a new front piece and just cut out the one hole for your sub and port?

MA$E
11-08-2006, 12:41 AM
^^^^ how do i do that? my box is glued already?

BASSMEKANIK
11-08-2006, 12:45 AM
go find a cheap single sub prefab box.

Reit38
11-08-2006, 08:48 AM
just add it to the front have it act as like a double front baffle

espguitarist91
11-08-2006, 09:36 AM
you can put a piece of mdf over the hole. Put weather stripping to make it airtight and screw it in. youd have to fill the screw holes wehn you take the piece off though.

Twistid
11-08-2006, 09:39 AM
i got a ported box made for 2 15" L7's.. one is blown so i had to take it out...and now i have a pointless box, the air just comes right out. is there anything i can do to cover the hole? i tried a piece of MDF but it just rattles like crazy....anything i can do?

seperate chambers FTW

ssj2xxgotenxx
11-08-2006, 01:59 PM
seperate chambers FTW

x2

iamamp3pimp
11-08-2006, 02:50 PM
hows this....u already put a piece of MDF over the hole right?

pull it off, and put weatherstripping down, where there the temp board, and the other piece meet. then pyt the other MDF back down and screw it back together. gives a good seal, but u have to remember to chill the gains a bit...it may just be ur sub ratteling.