PDA

View Full Version : 12" Napalm Enclosure, Soon to be Pics!



kicker06
11-06-2006, 06:34 PM
Ok.

12" Napalm is on the way. I have tomorrow off school. Election day FTW! So the build will most likely be tomorrow.

Anyways, I have a design, but I want input and other designs.

Have Max Dims of 14" High and 29" Wide, Depth can be whatever.

Anyway's here's my design, I will use double baffle since this sub does weigh 50+lbs.

http://subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=14&Dia=6&Xmax=34&Vd=.19&NumW=1&Vb=3.7&Fb=33&Qts=&Vas=&Fs=&CE=0

3.7 cu before port and sub.

Tuned to 33hz

62 sq" of Port.

Post away!

baseballer1100
11-06-2006, 06:38 PM
Better hurry up with those **** pics.

kicker06
11-06-2006, 07:19 PM
Yea, sure will.

mazdakid
11-06-2006, 07:54 PM
is this going with the hifonics amp

kicker06
11-06-2006, 08:26 PM
Yes.

Any input at all, want to build this tomorrow!

kicker06
11-07-2006, 10:12 AM
usually theres a lot more help!

lilmaniac2
11-07-2006, 10:17 AM
box is too big

kicker06
11-07-2006, 10:31 AM
Tariq says he has his 12" in a 4.5cube box gross.

3.5 NET is too big?

This is smaller.

http://subwoofertools.com/forum/ported-box.asp?Ew=28&Eh=14&Dia=6&Xmax=30&Vd=.19&NumW=1&Vb=3.2&Fb=33&Qts=&Vas=&Fs=&CE=0

Is that better?

lilmaniac2
11-07-2006, 10:32 AM
yes... dont get me started on tariq....

with the larger box its gonna make the sub more efficient , but take less power....

kicker06
11-07-2006, 10:39 AM
yes... dont get me started on tariq....

with the larger box its gonna make the sub more efficient , but take less power....

Well I only have ~1000 to give it, if that's any importance.

lilmaniac2
11-07-2006, 10:43 AM
2.2 cubes in a ext cab truck with 1 4" areo that is 15 inches long = 140db @ 35 hz with 800 watts of power..

u make the call :)

( thats on the dash btw :) )

kicker06
11-07-2006, 10:49 AM
I aint looking for an SPL type enclosure, even though that really isn't.

3cu is too big?

Chevyaudio
11-07-2006, 10:51 AM
3 Cubes is to big for almost any 12"....Drop down to 2.0-2.5

kicker06
11-07-2006, 10:53 AM
http://subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=14&Dia=6&Xmax=33&Vd=.19&NumW=1&Vb=2.7&Fb=33&Qts=&Vas=&Fs=&CE=0

Gunna hit it up

Chevyaudio
11-07-2006, 12:46 PM
Boo Labarynth Port


HORAY Aero Port. or hell even an Lshape...

Dude. Hit me up on AIM, I will help you out

Chevyaudio7112

mikey060
11-07-2006, 02:00 PM
how accurate is that subwoofertools.com box designer? is it a decent program?

kicker06
11-07-2006, 02:58 PM
Well it is calculations. It's either wrong or right. I think it does what it is supposed to.

skadude016
11-07-2006, 03:05 PM
this should work better if you wanna use that program :)

http://subwoofertools.com/forum/ported-box.asp?Ew=28&Eh=14&Dia=6&Xmax=23&Vd=.19&NumW=1&Vb=2.5&Fb=33&Qts=&Vas=&Fs=&CE=0

skadude016
11-07-2006, 03:05 PM
how accurate is that subwoofertools.com box designer? is it a decent program?

it is very easy to use espically if your new to the box building thing and is usually pretty close or dead on

lilmaniac2
11-07-2006, 03:06 PM
works for me :)

kicker06
11-07-2006, 07:28 PM
Got all my pieces cut, 45degree angles cut and port guide (3 1/4") cut as well.

Test fit and it all went together beautifully. It is a very small box (2.5cu) it seems, and I think the Napalm takes up a lot of area (.25 cu ft?). Let's hope it hits low and loud. It just doesn't seem like a 2.5cu ft box would hit low and loud, but we will see.

Pics to come.

baseballer1100
11-07-2006, 07:48 PM
We Want PICS!!!!