View Full Version : 12" Solo Baric L7 Enclosure

11-03-2006, 01:31 PM
Does anyone have any preference for enclosures on a 12" L7. I had an older one in a sealed box but I am upgrading to the '06 L7 model. This will be going in my '02 Accord. I have never used a ported/slotted box. Just thinking I may like the sound out of it since I like a lot of bass. Just wondered if anyone had any similar experiences with either box with an L7. Thanks!

11-03-2006, 01:36 PM
3 Cubes @ 35 Hz.

11-03-2006, 06:37 PM
20 cubes 2 htz should do the trick

11-04-2006, 06:07 PM
bump for a good cause

11-06-2006, 03:09 PM
I just ordered a s12l7 and put together plans to build a slott ported box @ 3.25 cu/ft @ 32 Hz. Which is pretty close to the specs that Kicker put out. Build off the manfucture specs and you will be in a good ball park. I have done this for the last 3 drivers I purchased and have been very happy with the outcome.

11-06-2006, 05:00 PM
Depends on power your gonna put on it.
2.5 at 36-38hz is fine,but if you only have lower power under 1000watts then go with a 3 cube and 35-38hz.Both with around 40 square of port area.

11-06-2006, 06:43 PM
20 cubes 2 htz should do the trick

get out of here.

11-06-2006, 08:47 PM
get out of here.