PDA

View Full Version : 18" BTL box help



TylerBD12
11-01-2006, 07:14 PM
So I just bought a 2000 blazer and have SOOO much room!!!(atleast more than i had in the camaro.)

I'm planning on putting a 18" fully loaded BTL in it
I listen to mostly rap. so what should i tune it to?

The max dimensions of the box are going to be 29x37x15 i think that comes out to 9.2 cubic feet or somewhere around there. so if anybody wants to make me box plans that would be great too, cuz i have no clue how to do any of that.

TylerBD12
11-03-2006, 11:01 PM
Anybody have any ideas?
i think i know who i'm going to have design my box. but i'm still clueless on what to have him tune it to.

baseballer1100
11-03-2006, 11:18 PM
This might help.
http://www.soundsolutionsaudio.com/forum/index.php?showtopic=7797

Kenny Pollock
11-03-2006, 11:22 PM
I would tune to 30hz or so... I love how music on my 18" BTL sounds at that tuning. When I do the wall we're going to tune it for 33hz daily.

iamamp3pimp
11-04-2006, 04:50 AM
I would tune to 30hz or so... I love how music on my 18" BTL sounds at that tuning. When I do the wall we're going to tune it for 33hz daily.

any more of those and you will be doing it solo.

SHiZNiLTi
01-07-2007, 12:42 AM
I also have a blazer. How would this design work out, it's 7.6 cubes at 31hz...

Should I lower the height of it to lower the cubes or do you think 7.6 is just right.

Should I increse the port area by making it into a L port and using a wedge in the corner to decrease port nose.

Also it looks like I will need some serious bracing too.

I have 2250 watts rms going to it.

I'm orderign my 18" BTL this week :D

BTW, this is pretty much like my design I did for my typr R's and it pounds hella good...

http://www.xtremesystems.org/forums/showpost.php?p=1512153&postcount=390

http://img208.imageshack.us/img208/2387/fibtl18pw6.jpg

bamaboy
01-07-2007, 02:14 PM
what is the RE sub box design?

SHiZNiLTi
01-07-2007, 09:00 PM
This is just a basic L port desgin, you think more port area will help out? More port area will also help bracing. How about this 6.3 @ 30hz...

http://img213.imageshack.us/img213/6919/moreportvq1.jpg