PDA

View Full Version : 06 XXX Box Plan.. Come Check it out..



bossman032
10-25-2006, 03:45 PM
http://img172.imageshack.us/img172/1828/xxx12on4zo7.th.png (http://img172.imageshack.us/my.php?image=xxx12on4zo7.png)


how does this box look?? Should I build it or what??

need to get this box right the first time. Its going in a Hatchback Civic 91.

sub woofer firing up.

:naughty:

iamamp3pimp
10-26-2006, 04:33 AM
it looks like a sealed box with a drawn in port.

there is no listed port info there to tell the tuning or anything.

I wouldnt build that at all.

iamamp3pimp
10-26-2006, 04:34 AM
double post ftw

bossman032
11-03-2006, 03:43 PM
I am currently pissed off.

80inches made that box design that **** is way wrong.
I wasted a perfect good 1" wood down the drain 45 bucks.

what was off was the front and port dimensions were off.

17x11 wtf and 17x15 both were wrong.

80inches what you have to say for yourself. I know u make boxes and **** how in the hell can u give out the wrong box dimensions??

50 bucks down the drain for a careless mistake. people advised me not to make that box. I should have measure it myself instead of trusting him.

I hope he can man up and refund the money..
80inches do that math and see what you screwed up and post.

Flipx99
11-03-2006, 03:48 PM
I would have used 3/4 for that box design. 80 gave me a good design. I dunno man.

theothermike
11-03-2006, 03:48 PM
80 inches is a trusted guy, i would trust him not matter what. but eveyrone makes mistakes and it could be possibility

Mike

bossman032
11-03-2006, 03:50 PM
I would have used 3/4 for that box design. 80 gave me a good design. I dunno man.

good design doesn't mean he didn't **** up. he did its obvious and you can tell.
I hope he refunds me my money wasted!!! :rolleyes:

Flipx99
11-03-2006, 03:51 PM
good design doesn't mean he didn't **** up. he did its obvious and you can tell.
I hope he refunds me my money wasted!!! :rolleyes:

What is obvious about his mistake?

bossman032
11-03-2006, 03:51 PM
80 inches is a trusted guy, i would trust him not matter what. but eveyrone makes mistakes and it could be possibility

Mike



I am not saying that or knocking him. He clearly made a mistake. Lets wait for his response.

Flipx99
11-03-2006, 03:52 PM
Looks like a low tuned box to me.

Flipx99
11-03-2006, 03:54 PM
I see what you mean. I don't see port width in the pic.

Actually, it is there...you just have to derive it 51 / 17 = 3 inches.

bossman032
11-03-2006, 03:54 PM
What is obvious about his mistake?


look at the box man. 17x11 and 17x15.

Flipx99
11-03-2006, 03:56 PM
That is the port length....

11 inches in and then 17 inches right.

I don't see a 15.

Flipx99
11-03-2006, 03:58 PM
I am not understand where you think he is wrong?

bossman032
11-03-2006, 03:58 PM
That is the port length....

11 inches in and then 17 inches right.

I don't see a 15.


that was an error he made told me to make a 17x15 instead of 17x17!!

bossman032
11-03-2006, 03:59 PM
I am not understand where you think he is wrong?


trust me its wrong. we tried to put the box together. this is pissing me off your asking to much questions. the box is wrong.

Flipx99
11-03-2006, 04:00 PM
So... he told you 15, but the image says 17.

I see now...I see where that would ****...I wouldn't throw it away. You tuning will be higher. Do you have 2" x 17" you can glue to it?

Flipx99
11-03-2006, 04:01 PM
trust me its wrong. we tried to put the box together. this is pissing me off your asking to much questions. the box is wrong.

nm

bossman032
11-03-2006, 04:07 PM
yea its wrong. lets wait for his response. I sent him a message via pm.

Kenny Pollock
11-03-2006, 04:07 PM
trust me its wrong. we tried to put the box together. this is pissing me off your asking to much questions. the box is wrong.
don't be such a ****, he's asking questions to help you with a solution

bossman032
11-03-2006, 04:09 PM
don't be such a ****, he's asking questions to help you with a solution

help me with a solution be real. :crap:

Kenny Pollock
11-03-2006, 04:13 PM
help me with a solution be real. :crap:Why do you think he was asking you questions? To make you mad?

oxsign
11-03-2006, 04:15 PM
help me with a solution be real. :crap:**** dude relax, are you 12yrs old or something?? People are asking question to try and help you. 80 is a guy that knows his $hit. If something is wrong maybe he can design you something else. :cool:

Pl8er
11-03-2006, 04:21 PM
This sounds like a case of only child syndrome to me. See only children not only get mad (read pissed) at everything, but anyone who tries to help, they get mad at as well. Reading the posts around here you can see that 80 is very well respected. He either made an error, or you misunderstood. Either way, its 45 dollars. Its not the end of the world. He will do you right I'm sure.

So simma-dow-NA :P

dflw_99
11-03-2006, 04:23 PM
X2

he is really a trusted man around here, you better calm down a bit if you want him to even consider it. i know your fustrated but if you want him to work with you, your attitude needs to change.

and secondly dont cry, we aint your moma

acold7dusta
11-03-2006, 04:28 PM
from the looks of thinks, you cut it wrong and now your trying to blame 80 on YOUR mistake, so fix it and dont take it out on him man

bossman032
11-03-2006, 04:28 PM
I know his trusted man lol. why you think I got it from him?

I take it you guys like kissing ***.

Its just this gay he makes boxes and screwed up mine.

I will have to go buy more wood to do it over again money lost time etc.
I am not building the box my friend is he is a busy man. I wasted his time he was pissed of also. He was like wtf this dude makes boxes and can't give the right measurement.

xluben
11-03-2006, 04:31 PM
if you did cut the port 2 piece 15x17 instead of 17x17, wouldn't it still fit just fine?

the port would just be 2" shorter and the tuning probably 1Hz higher. you wouldn't hear a difference.

also, if he gave you that pic to work off of, i don't really see how it's his fault.

if i misunderstood what the mistake was, please disregard this post.

Flipx99
11-03-2006, 04:32 PM
if you did cut the port 2 piece 15x17 instead of 17x17, wouldn't it still fit just fine?

the port would just be 2" shorter and the tuning probably 1Hz higher. you wouldn't hear a difference.

also, if he gave you that pic to work off of, i don't really see how it's his fault.

if i misunderstood what the mistake was, please disregard this post.

we are in the same boat.

Pl8er
11-03-2006, 04:33 PM
Its just this gay he makes boxes and screwed up mine.

That sentence, wow man...wow.

mtdewelf
11-03-2006, 04:34 PM
I know his trusted man lol. why you think I got it from him?

I take it you guys like kissing ***.


no they just like have FACTS before coming to conclusions. Your inability to answer simple questions makes everything believe that the chance of you screwing it up is much MUCH more then 80.

Any answer to the above question from Xluben?

bossman032
11-03-2006, 04:35 PM
don't just look at the box do that math.

see where he screwed up. the port lenght and front cover.

acold7dusta
11-03-2006, 04:36 PM
this box is upfiring, i keep reading the plans over, and cannot find anything wrong at all. the port and the sub are facing up, so if the 11x17 piece goes in first, then the 17x17 piece for the L, how is that wrong?

Flipx99
11-03-2006, 04:38 PM
don't just look at the box do that math.

see where he screwed up. the port lenght and front cover.

Can you explain in greater detail?

The top cover assumes a 3" wide port. You get this by dividing the 51" of port area by the inside width of the box (17")

The port length add as so:

1" side
+ 11"
+ 17"
+ 1" on the turn
+ .5 " you add because of the turn (commonly done)
------
30.5 inches. I don't see what the problem is.

acold7dusta
11-03-2006, 04:40 PM
i think he thinks the "front" is where he's supposed to put his port...

xluben
11-03-2006, 04:40 PM
top should be: 19 (c) x 30 (b)

if i understand correctly.

did you just cut it out and realize its a sealed box?

Flipx99
11-03-2006, 04:41 PM
top should be: 19 (c) x 30 (b)

if i understand correctly.



That is correct.

unless he is wanting the port to be at 90* from the sub.

xluben
11-03-2006, 04:42 PM
top should be where the port goes. it needs to be 4" shorter than the bottom to allow for the port opening.

port 1 should be attached inside the top piece (so that the port is 3" the whole way).

pwnt by pat
11-03-2006, 04:43 PM
The only thing wrong that I see is that he didn't tell you the exact cut length for the top piece.

Flipx99
11-03-2006, 04:43 PM
top should be where the port goes. it needs to be 4" shorter than the bottom to allow for the port opening.

port 1 should be attached inside the top piece (so that the port is 3" the whole way).

be careful, such accurate explanations tend to cause anger

xluben
11-03-2006, 04:43 PM
but that is gonna make the top piece end up 1" higher than the rest of the port opening.

i think 80 should have spent a bit more time on this design, it's not really wrong, but just kinda confusing and half assed.

Flipx99
11-03-2006, 04:43 PM
The only thing wrong that I see is that he didn't tell you the exact cut length for the top piece.

But he can still fix it.

Flipx99
11-03-2006, 04:45 PM
but that is gonna make the top piece end up 1" higher than the rest of the port opening.

i think 80 should have spent a bit more time on this design, it's not really wrong, but just kinda confusing and half assed.

The way I understood, the port 1 should start under the right side of the port opening. that is the only way to get to 30.5"

I agree, the pic does ****.

xluben
11-03-2006, 04:47 PM
The way I understood, the port 1 should start under the right side of the port opening. that is the only way to get to 30.5"

I agree, the pic does ****.

yeah, that is mentioned in my other post, that is also necessary to keep the port width 3" the whole way.

BUT putting the box together like that will make the top piece sit higher than the other three walls of the port opening.

Flipx99
11-03-2006, 04:49 PM
yeah, that is mentioned in my other post, that is also necessary to keep the port width 3" the whole way.

BUT putting the box together like that will make the top piece sit higher than the other three walls of the port opening.

How so? Is the left side too short? I need to re-examin pic to be sure.

Flipx99
11-03-2006, 04:51 PM
Your exactly right. The left side will be 1" shorter than the front,.

mikey060
11-03-2006, 04:51 PM
im curious...is that the actual design 80 sent you?

Flipx99
11-03-2006, 04:52 PM
im curious...is that the actual design 80 sent you?

I would say so. That is how mine arrived. I did not use the cut sheet however. I don't like how bbp6 puts boxes together.

mikey060
11-03-2006, 04:56 PM
oh okay. yea i dont like the looks of the program used looks somewhat confusing

well the cutsheet atleast

Flipx99
11-03-2006, 04:57 PM
oh okay. yea i dont like the looks of the program used looks somewhat confusing

well the cutsheet atleast

The bottom part is probably MS Paint.

xluben
11-03-2006, 05:09 PM
yeah, bbp cutsheet's ****.

80 should have put the sub/port on one of the "side" walls (and adjusted the dimensions so that the sides were the biggest. then the cutsheed would have been better setup for adding in a port and not having the lopsided end piece.

or he could have just used the ported box designer (but i've found that to be a real pain).

FYI, i could have whipped up a box like that (with a proper cutsheet) on subwoofertools.com in about 5 min (and for free) :)

mikey060
11-03-2006, 05:46 PM
The bottom part is probably MS Paint.

lol...it better be

Pyro_By_Nature
11-03-2006, 05:57 PM
80 is a guy that knows his $hit.


:laugh: :laugh: :laugh: :laugh: :laugh: :laugh:


Ohhh dude stop, you're making my sides hurt :laugh: :laugh: :laugh:

He knows how to punch a couple numbers into a computer program, woohoo.

If that's the actual design he sent you, I feel bad for anyone that gets a box design from him :laugh: VERY unprofressional.

He can't even be bothered to spell "what" correctly.And the little drawing, lol.Port isn't even the same width all around. MS paint > him. Looks like one of jordan tyler's boxes.

Mitch86
11-03-2006, 06:05 PM
I also felt that the plans I got from him were confusing and not very accurate. I actually had to point out several typos that confused the **** out of me. He wasnt very helpful when I asked questions either. I thought he was a respected designer around here though...I have no idea now. :eyebrow: He did give me the plans before I payed and answered a couple of questions at first. Just got kinda sketchy after a couple simple questions. Not what I was expecting to tell the truth. But all in all, I have nothing agianst him I guess.

Mitch86
11-03-2006, 06:06 PM
HAHA, I just noticed I've been quoted in someones sig...I feel all warm inside now.

Pyro_By_Nature
11-03-2006, 06:54 PM
HAHA, I just noticed I've been quoted in someones sig...I feel all warm inside now.


When I read that, I just thought it was too god **** funny.I had to have it in my sig. lol.

mikey060
11-03-2006, 07:14 PM
:laugh: :laugh: :laugh: :laugh: :laugh: :laugh:


Ohhh dude stop, you're making my sides hurt :laugh: :laugh: :laugh:

He knows how to punch a couple numbers into a computer program, woohoo.

If that's the actual design he sent you, I feel bad for anyone that gets a box design from him :laugh: VERY unprofressional.

He can't even be bothered to spell "what" correctly.And the little drawing, lol.Port isn't even the same width all around. MS paint > him. Looks like one of jordan tyler's boxes.


i thought the "and ideaof wat it will look like" was what the OP added incase we didnt knowwhat a ported box looks like LOL

Pl8er
11-03-2006, 07:44 PM
How much does an 06 XXX cost? I'm pretty sure they are rather expensive. Why would someone who wants to spend so much money on a high end sub build a 45dollar box?

*shrug* just curious.

Omarvelous
11-03-2006, 07:48 PM
Your a ******* for not going over the plans first.....

IMHO..... u can do the math...right?

Like those ppl driving their cars into ditches because their navs said "turn right"

Ford302Redneck
11-03-2006, 07:55 PM
I guess we need 80 in here to say his peace and everything...

reneeb7363
11-03-2006, 07:56 PM
Your a ******* for not going over the plans first.....
IMHO..... u can do the math...right?

Like those ppl driving their cars into ditches because their navs said "turn right"

quote worthy! LAWL!

JimJ
11-03-2006, 07:57 PM
in soviet russia, car drive you

Pl8er
11-03-2006, 07:58 PM
in soviet russia, car drive you



HA HA HA HA!! What movie was that from?

JimJ
11-03-2006, 07:59 PM
It's a pun on Yakov Smirnoff's comedy...that one was in Family Guy.

Pl8er
11-03-2006, 08:00 PM
Yeah! thats where I heard it! Was that the one where Peter was buying a new car?

acold7dusta
11-03-2006, 08:19 PM
i think that might be the one where he buys meg a tank and then uses it to destroy the market hah

80INCHES
11-04-2006, 12:44 AM
ALL I CAN SAY IS WOW:eek:
I havent been online in a couple days and i come back to this..:crap: ....how is that u can send a pm to me...but make a thread afterwards and blast me....in your pm u asked if i can refund your 10bux....i will gladly do that if u werent pleased with the design...but at the same time dont sit up here and speak bad about me and u never gave me a chance to respond..we could have settled this like men and do it thru pm...i'm not the kind of dude that scams people...i'm not tcab boy mark potts or denial..so dont treat me like them...
but i am shocked as to the things i'm reading in this thread.
looking at how things turned out...i do apologize for the minor mistake...but last time i recall..and saywat can testify to this 1 cuz he did help me out...i sent u a sketchup of how the sub will hit the port wall(if the peice of wood was 17x17)
does that ring a bell...it should..thats y i told u ..make the port 17x15 so it wont touch the sub....remember that..i even sent u a another set of plans so u wont get confused....but now..u want to use the plans that wont work and u want to sit up here and talk **** about me....i dont think so buddy....the only mistake i think i made....no let me rephrase that..the only mistake I MADE was trying to fix a low tuned ported box for a 06 xxx12(impracticle subs for that car btw:up2somet: )i did what i could with the measurements u gave me....remember the 34x19x16 size u gave me in aim and told me u wanted the sub facing up with the port...and i told u the sub was too long and i told u to have the facing the back cuz u will have more clearance with the sub...but i guess u 4got that...but its ok...i see how u do things so i know not to deal with u any more


80
give me your paypal so i can get u out of my hair

80INCHES
11-04-2006, 12:50 AM
I also felt that the plans I got from him were confusing and not very accurate. I actually had to point out several typos that confused the **** out of me. He wasnt very helpful when I asked questions either. I thought he was a respected designer around here though...I have no idea now. :eyebrow: He did give me the plans before I payed and answered a couple of questions at first. Just got kinda sketchy after a couple simple questions. Not what I was expecting to tell the truth. But all in all, I have nothing agianst him I guess.

i cant believe u can sit up here and say that....when me and u talked often....i tell anybody if u have any question please feel free to ask...and i'm always on aim and u know that
hell bossman knows that..i can be tired as all hell or have to give my daughter dinner or tend to my wife needs...he and other folks i helped had my time...
but if u felt something was wrong u should have said something

80
i can believe this ****..some1 should have called me to tell me shiot like this was going on

bossman032
11-04-2006, 01:26 AM
I didnt cut it 17x17!!

If you see my post I said 17x15

try and make a box with the dimensions you gave me see if it works lol.

my paypal id: [email protected]

I just wasted my time on that wood and its all screwed up now. I am not the only one having problems. you see the comments please take it. I was pissed that it didn't work. most people don't know how to measure tell you the truth.

Ford302Redneck
11-04-2006, 01:33 AM
I agree with 80, if you had a problem, you should took it up with him first, when if that didnt work, post it and see if you could work something out then. Dont jump the gun anymore. Learn from your mistakes instead of digging yourself into a deaper hole. I believe 80 knows what he is doing, seems like everybody else can read his box plans, cept you. But like I said, if you had the problem with it, you should reviewed the plans first before you built. Would saved you alot of time and effort. I also think if 80 was so wrong like your saying he is, he woulda helped you and fixedthe plans since they was soooooo wrong to you. That is all Im going to waste on this ghey subject.. Next time be a man, and take it up with the man, you had a problem with instead of dragging everyone else into it.

bdawson72
11-04-2006, 01:35 AM
ah the bandpass

Pyro_By_Nature
11-04-2006, 01:35 AM
ALL I CAN SAY IS WOW:eek:
I havent been online in a couple days and i come back to this..:crap: ....how is that u can send a pm to me...but make a thread afterwards and blast me....in your pm u asked if i can refund your 10bux....i will gladly do that if u werent pleased with the design...but at the same time dont sit up here and speak bad about me and u never gave me a chance to respond..we could have settled this like men and do it thru pm...i'm not the kind of dude that scams people...i'm not tcab boy mark potts or denial..so dont treat me like them...
but i am shocked as to the things i'm reading in this thread.
looking at how things turned out...i do apologize for the minor mistake...but last time i recall..and saywat can testify to this 1 cuz he did help me out...i sent u a sketchup of how the sub will hit the port wall(if the peice of wood was 17x17)
does that ring a bell...it should..thats y i told u ..make the port 17x15 so it wont touch the sub....remember that..i even sent u a another set of plans so u wont get confused....but now..u want to use the plans that wont work and u want to sit up here and talk **** about me....i dont think so buddy....the only mistake i think i made....no let me rephrase that..the only mistake I MADE was trying to fix a low tuned ported box for a 06 xxx12(impracticle subs for that car btw:up2somet: )i did what i could with the measurements u gave me....remember the 34x19x16 size u gave me in aim and told me u wanted the sub facing up with the port...and i told u the sub was too long and i told u to have the facing the back cuz u will have more clearance with the sub...but i guess u 4got that...but its ok...i see how u do things so i know not to deal with u any more


80
give me your paypal so i can get u out of my hair


So, you knew the sub wouldn't fit properly, but yet you still took his sub and designed a box anyway? Great customer service.Let's scrape the surface on something, stupid.You are very unprofessional in the way you speak.I never do business with anyone if they can't even spend time to type words out fully.Are you 15 and talking on an instant messenger? No.So stop typing like that.

If the customer didn't get what they paid for, they have every right to make a thread.Last time I checked it was not the buyers responsibility to double check a plan to make sure it is correct.That is what they paid you for, correct?It appears as if you hold a grudge against anyone who doesn't kiss your ***.

To each his own, have a nice night everyone.

80INCHES
11-04-2006, 01:46 AM
mountaineer wat u say in any thread is not important..all u do is bash people so go back in your little car and stay on the phone with your boyfriend mark potts

boss check your paypal in 2 mins
80

80INCHES
11-04-2006, 01:53 AM
refund sent

80

bdawson72
11-04-2006, 02:03 AM
Yea 80 is a pretty good guy....that sux that it doesnt work but i shouldve contacted him on aim or sent him a pm.......anything is better than this

80INCHES
11-04-2006, 02:17 AM
Yea 80 is a pretty good guy....that sux that it doesnt work but i shouldve contacted him on aim or sent him a pm.......anything is better than this

exactly
he made the post about me at 3:43pm yesterday and had nerve to pm me the same day at 10:46pm with a smiley face
this noob got some serious balls

80
subscribed

snoopdan
11-04-2006, 02:25 AM
80, you should put this disclaimer on all your plans


http://i81.photobucket.com/albums/j211/snoopdan1/80ages.jpg

80INCHES
11-04-2006, 02:29 AM
lmao

that sooo true....that should be my copywriteor stamp of approval..lol


80

iamamp3pimp
11-04-2006, 02:45 AM
lol @ snoop, that was pretty funny.


i was going to type up a long thought out response, but in tirn, i decided not to because i am going to bed.


s

Pyro_By_Nature
11-04-2006, 02:50 AM
mountaineer wat u say in any thread is not important..all u do is bash people so go back in your little car and stay on the phone with your boyfriend mark potts
80

Is that all you can do? Someone attacks you with facts and you have to make up ****. :laugh:

Well, if you want to know, I actually DO give quite a few compliments to people.But only to those who I feel deserve it. Ummm, I don't own a "little car" I don't talk on the phone and drive, and I hate mark potts.So there goes your whole post.

BTW: What the hell do I have to do with mark potts? NOTHING, but yet it's funny you can't think of something more creative.Please just go back to playing with your bandpass boxes and your quiet set-up.

Omarvelous
11-04-2006, 03:33 AM
Wait wait, if i get this right.....1 piece was messed up???

And So the other pieces are fine?

And you have NO MDF left?

You can't......re-cut that 1 piece??

Let me understand.

bossman032
11-04-2006, 03:43 AM
you see in this thread kissing *** at its best.

when some speaks up the kiss *** guys try put a smart comment. :naughty:

keep kissing people *** you fruit cakes. :laugh:

chozen1
11-04-2006, 03:46 AM
Wait wait, if i get this right.....1 piece was messed up???

And So the other pieces are fine?

And you have NO MDF left?

You can't......re-cut that 1 piece??

Let me understand.

i thought i was the only one that noticed that
bossman032 answer the question. is it 1 piece thats messed up?

bossman032
11-04-2006, 03:49 AM
i thought i was the only one that noticed that
bossman032 answer the question. is it 1 piece thats messed up?

its more the 1 piece thats messed up!!

the port length also.

bossman032
11-04-2006, 03:52 AM
I should have took pictures lol.

bossman032
11-04-2006, 03:55 AM
as a matter of fact I will go take pictures tomorrow if I have time.

show you exactly where are all the screw ups. :mad:

iamamp3pimp
11-04-2006, 04:45 AM
you see in this thread kissing *** at its best.

when some speaks up the kiss *** guys try put a smart comment. :naughty:

keep kissing people *** you fruit cakes. :laugh:

I didnt see me kissing ***.

if he messed up he messed up. i mean its one piece, and it can be recut, but i believe you are entitled to the refund tha tyou recieved, and i'd do the same thing.


you just need to explain yourself better. thats all

xluben
11-04-2006, 10:19 AM
I didnt cut it 17x17!!

If you see my post I said 17x15

try and make a box with the dimensions you gave me see if it works lol.



that 17x15 piece should have nothing to do with how the box fits together!

as long as you shortened the top piece 4" like i mentioned in my other posts, it should have gone together fine.

anyone who can't do elementary level math should not be allowed near a saw :)

xluben
11-04-2006, 10:22 AM
looking at how things turned out...i do apologize for the minor mistake...but last time i recall..and saywat can testify to this 1 cuz he did help me out...i sent u a sketchup of how the sub will hit the port wall(if the peice of wood was 17x17) does that ring a bell...it should..thats y i told u ..make the port 17x15 so it wont touch the sub....remember that..i even sent u a another set of plans so u wont get confused....

do you mind posting up a copy of the sketchup rendering you did?

saywhat?
11-04-2006, 10:24 AM
ALL I CAN SAY IS WOW:eek:
I havent been online in a couple days and i come back to this..:crap: ....how is that u can send a pm to me...but make a thread afterwards and blast me....in your pm u asked if i can refund your 10bux....i will gladly do that if u werent pleased with the design...but at the same time dont sit up here and speak bad about me and u never gave me a chance to respond..we could have settled this like men and do it thru pm...i'm not the kind of dude that scams people...i'm not tcab boy mark potts or denial..so dont treat me like them...
but i am shocked as to the things i'm reading in this thread.
looking at how things turned out...i do apologize for the minor mistake...but last time i recall..and saywat can testify to this 1 cuz he did help me out...i sent u a sketchup of how the sub will hit the port wall(if the peice of wood was 17x17)
does that ring a bell...it should..thats y i told u ..make the port 17x15 so it wont touch the sub....remember that..i even sent u a another set of plans so u wont get confused....but now..u want to use the plans that wont work and u want to sit up here and talk **** about me....i dont think so buddy....the only mistake i think i made....no let me rephrase that..the only mistake I MADE was trying to fix a low tuned ported box for a 06 xxx12(impracticle subs for that car btw:up2somet: )i did what i could with the measurements u gave me....remember the 34x19x16 size u gave me in aim and told me u wanted the sub facing up with the port...and i told u the sub was too long and i told u to have the facing the back cuz u will have more clearance with the sub...but i guess u 4got that...but its ok...i see how u do things so i know not to deal with u any more


80
give me your paypal so i can get u out of my hair


tis true.

saywhat?
11-04-2006, 10:25 AM
do you mind posting up a copy of the sketchup rendering you did?

if its the one i sent him, i did it. It showed the sub MIGHT HIT 1 1/4 inches of that port piece I believe, I cant recall exactly, but it was LESS than the 2 inches he made the correction for.

saywhat?
11-04-2006, 10:27 AM
its more the 1 piece thats messed up!!

the port length also.

it should ONLY BE ONE PIECE ****ED UP, if its not, YOU read the plan wrong and ASSEMBLED IT in the wrong order.

The port piece is TWO INCHES TOO LONG.....******* cut two inches off. holy ****.

saywhat?
11-04-2006, 10:28 AM
I honostly dont know how hard it is to double check everything especially the builder. Invision it being put together hell draw it out of you have too. You should be able to immediatly notice an error if it wont fit together.

the plan shows how the edges should be put together :fyi: and BBP6 has something wrong with it if those demensions are wrong.

xluben
11-04-2006, 10:30 AM
if its the one i sent him, i did it. It showed the sub MIGHT HIT 1 1/4 inches of that port piece I believe, I cant recall exactly, but it was LESS than the 2 inches he made the correction for.

i was just wondering if it showed the top piece sitting 1" higher than the other 3 walls of the port opening (if you can understand what that means).

i was also wondering if it was ever mentioned that the top piece should be 4" shorter to allow for the port opening (even though it should be obvious).

saywhat?
11-04-2006, 10:31 AM
i was just wondering if it showed the top piece sitting 1" higher than the other 3 walls of the port opening (if you can understand what that means).

i was also wondering if it was ever mentioned that the top piece should be 4" shorter to allow for the port opening (even though it should be obvious).

thats BBP6 demensions, not 80's. Dude assembled it wrong so it seems.

saywhat?
11-04-2006, 10:33 AM
i was just wondering if it showed the top piece sitting 1" higher than the other 3 walls of the port opening (if you can understand what that means).

i was also wondering if it was ever mentioned that the top piece should be 4" shorter to allow for the port opening (even though it should be obvious).

the plan shows the top piece sitting on top of the box. yes. All that is needed is A) a jig saw B) a router with a flush trime bit or C) a ******* butter knife.

saywhat?
11-04-2006, 10:38 AM
okay, i just sketchup'd it with the demensions ON THE PLAN POSTED! and it fits perfectly together externally and internally. (port as well)

xluben
11-04-2006, 10:38 AM
the plan shows the top piece sitting on top of the box. yes. All that is needed is A) a jig saw B) a router with a flush trime bit or C) a ******* butter knife.

i was just saying, that if you start with the BBP box, and want to put the port and driver on the "top" wall, you have to cut 4" off the top to allow for the port opening.

if you do this, it will make the top piece sit higher than the other 3 walls of the port opening. if you wanted them all to be even you'd have to start doing 90 degree cuts, and adding an inch to the other pieces.

this doesn't really affect the funtionality of the box, i just wouldn't want my box to look like that.

i have not seen everything 80 sent him, so maybe he accounted for this.

i think the biggest mistake here was starting with a BBP plan for a sealed box and then trying to add in a port :crap:

if it was all done in sketchup anyways, it might have well just been dimensioned in there.

saywhat?
11-04-2006, 10:39 AM
lmfao at that picture.

saywhat?
11-04-2006, 10:41 AM
i was just saying, that if you start with the BBP box, and want to put the port and driver on the "top" wall, you have to cut 4" off the top to allow for the port opening.

if you do this, it will make the top piece sit higher than the other 3 walls of the port opening. if you wanted them all to be even you'd have to start doing 90 degree cuts, and adding an inch to the other pieces.

this doesn't really affect the funtionality of the box, i just wouldn't want my box to look like that.

i have not seen everything 80 sent him, so maybe he accounted for this.

i think the biggest mistake here was starting with a BBP plan for a sealed box and then trying to add in a port :crap:

if it was all done in sketchup anyways, it might have well just been dimensioned in there.



makes no sense. if you want the top piece on top, put it on there, and cut the port hole out of it, if you want it sandwhiched between all sides, extend things up 1 inch, and cut all sides of the baffle down 1 inch except port side or whatever. (which would be cut down enough to have the port width correct.

saywhat?
11-04-2006, 10:42 AM
http://i2.photobucket.com/albums/y18/sacreddispute03/80-1.jpg
EXTERNAL FITS PERFECT

http://i2.photobucket.com/albums/y18/sacreddispute03/80-2.jpg
sketchup i sent 80, because I was worried about fitment..........doesnt fit as you can see. as you can see its 1 11/16 inch for mounting clearance.

also note how I did the top piece......you can cut that with a friggin jig saw. but also notice that there is quite a bit of room ( i believe i went from outtermost edge to 2.5 inches so the outter most edge of the hole is 2.5 from the farthest edge. he could have moved it over ATLEAST 1 inch, if not 1.25.

80INCHES
11-04-2006, 10:48 AM
saywhat thank god u still have that pic
folks as u can see the original plan i had was 1/16th's to long and it would have hit the sub..thats if the port wall was 17x17...so to fix that i told him to make the port wall 17x15....which would fix the problem...where did i go wrong?

but this is a learning lesson.....

80

xluben
11-04-2006, 10:54 AM
ok, i see what you did with the port opening.

i was assuming all cuts (except the driver cutout) would be straight all the way through the board (making live easier).

you would have to have a router and some kind of guide to make that port opening look good. i don't think a jigsaw would do too well (but it could).

saywhat?
11-04-2006, 10:56 AM
its not all that hard to cut straight with a jigsaw.... relatively easy actually. a router and flush trim bit would work fine as well.

bossman032
11-04-2006, 12:08 PM
I will see what can be done. Maybe go with a new plan or with this one. What is true last time I had a plan made is same **** en problem. The dude gave the wrong cut out dimensions. Luckily I gave it to my friend he checked it over and corrected it. So bottom line is don't trust any **** en body they can't measure or give the right cut out sheets.

so what you *****es babbling about is the box still wrong or what??
One of the piece seem taller lol and sticking out of the box.

bossman032
11-05-2006, 01:11 AM
17X11 WILL NOT WORK. :uhoh:

iamamp3pimp
11-05-2006, 01:15 AM
I will see what can be done. Maybe go with a new plan or with this one. What is true last time I had a plan made is same **** en problem. The dude gave the wrong cut out dimensions. Luckily I gave it to my friend he checked it over and corrected it. So bottom line is don't trust any **** en body they can't measure or give the right cut out sheets.

so what you *****es babbling about is the box still wrong or what??
One of the piece seem taller lol and sticking out of the box.

I think i have a huge problem with that statement, but w/e.

should have been handled in a PM.

Chevyaudio
11-05-2006, 01:32 AM
DUDE....look at the Sketch up drawing....ITS TO SCALE, so it might as well be constructed out of wood. THE BOX FITS TOGETHER PERFECTLY. Im not kissing anyones ***...personally i havent ever dealt with 80...I have dealt with Grant (saywhat) before, and I know his sketchup renderings are correct.

Johnny Drama
11-05-2006, 01:48 AM
Buyer got his refund. Both sides of the story have been told...thread and topic are over. I dont want to see another on this matter.