PDA

View Full Version : how well would this work???



BlkMica_03
10-23-2006, 02:39 PM
how well would this work using the tire well as part of the box?? and how would i calculate this to get a certian tunning??

reneeb7363
10-23-2006, 02:56 PM
are you going to fiberglass the wheel well then attach the box to it? More info please... packing peanuts are commonly used to determine enc. volume... be sure to read some of the stickeys and search this forum-- lots of answers available out there.
I am gonna do something kind of like this.. using the wheel well, then, instead of flush mounting the subs they will be slightly raised above the level of the floor for "aiming" purposes..... something kind of different that I have not seen done (the way I have pictured), hoping it works. Good Luck

BlkMica_03
10-23-2006, 03:08 PM
yes plan on glassing the well and then attach that to the box

Rawr-DQ
10-23-2006, 10:41 PM
lmao at the drawling, just found it funny :)

Have fun glassing.

If you live near florida....Edit: even though you don't shipping would be 3-4 days, and still wouldn't cost too much, use this site for supplies:
http://www.uscomposites.com/

Get the 435 Standard Polyester Layup Resin
http://www.uscomposites.com/polyesters.html

and some chop strand mat...
http://www.uscomposites.com/mat.html
1-1/2oz Chopped Strand Mat or 2oz per square foot, if you want quicker buildup, but you may get more bubbles.

BlkMica_03
10-24-2006, 01:39 AM
yeah ms paint rules lol thanks for the links

iamamp3pimp
10-24-2006, 03:35 AM
look at kenny's box log in my sig for more pointers and to see what to expect too