PDA

View Full Version : Air Bubbles?



Spaceboy464
10-22-2006, 12:56 AM
So me and my friend started working on a box in my trunk. Due to it being in the trunk the first two layers had some bad air bubbles. I let it dry over the week and did my best to sand them out today. I switched to cloth today (from mat) because it seems easier to work with. I was just wondering if the air bubbles are going to cause a problem? I'm planning to do 6-7 layers.

Rawr-DQ
10-22-2006, 01:12 AM
I'll make the FG weaker, but since I guess it's on the floor ir wont really hurt that much, just layer over it...it's all good.

azbass
10-22-2006, 01:18 AM
try soaking the top and botom (both sides) of the pice of cloth/mat before you lay it

dont just put a pice down and brush over it, the whole pice needs to be soaked.

to pervent air pockets.

krouchchocolate
10-22-2006, 01:27 AM
also if u used a brush, try stabbing it with the brush hairs.

Spaceboy464
10-22-2006, 01:31 AM
try soaking the top and botom (both sides) of the pice of cloth/mat before you lay it

dont just put a pice down and brush over it, the whole pice needs to be soaked.

to pervent air pockets.

Here's how i'm doing it. I paint the box and then put the cloth or mat down. I then paint the cloth/mat by stabbing at it with my brush. My 1st layer was bad and it messed everything up. Maybe one day when I have the patience I'll redo it.