PDA

View Full Version : 3rd box for the D6 1.25 @35 hz ~**pix**~



acold7dusta
10-20-2006, 09:47 PM
well i decided to follow diamonds recommendation for my 10" D6 dual 2 ohm sub. its 1.25 cu ft with 2 2 -1/2" ports that are each 16" long. the curve starts at 30 hz (o db) peaks at 35.4 hz (+6db) and goes to about +2db @ 40 hz and slowly goes down to +1db 44 hz and up. its more of an output box, and should be miles away from my ****** .6 cu ft sealed box i got currently.

http://www.imagestation.com/picture/sraid217/pd4a3696891bf5f06f1d26418e4b2e1e8/ec6de6ae.jpg
http://www.imagestation.com/picture/sraid217/p214c5687a4dd1ff08c2d5faf859ccc2c/ec6de69d.jpg
http://www.imagestation.com/picture/sraid217/p8389df98abdf85dafc81a80ce6ae07ba/ec6de696.jpg
first time using titebond, we'll see how much i like it
http://www.imagestation.com/picture/sraid217/pba9028a483de022627a8a1dc18c1d18d/ec6de68e.jpg
guess my school books were worth the money after all:laugh:


time to get back to work, ill have more as i complete it

saywhat?
10-20-2006, 09:49 PM
nice. that graph aint bad sounding either haha.

acold7dusta
10-20-2006, 10:18 PM
got a couple more sides glued down
http://www.imagestation.com/picture/sraid217/p16d4d68a82b11f5b012c938678004038/ec6dd587.jpg
(top was just resting)
http://www.imagestation.com/picture/sraid217/pfafd5175f5e6aca68ff361da820123e1/ec6dd57b.jpg
http://www.imagestation.com/picture/sraid217/pacf7ced61333f15144bd2a46dc2354ae/ec6dd577.jpg
seam
http://www.imagestation.com/picture/sraid217/p8dfccccd17bd8a900ea68f5890775730/ec6dd56e.jpg
"top" glued on-thats where one of the ports will be, i gotta screw around with sketch up to see possible clearance issues with the other port
http://www.imagestation.com/picture/sraid217/p0f4fb4cd131cc795cf71abc505563d1a/ec6dd565.jpg
pail of water FTW?
http://www.imagestation.com/picture/sraid217/pb920bf98a3775741adc89ab3ac2a0bff/ec6dd559.jpg
progress so far, the wood layin down is the back panel

acold7dusta
10-20-2006, 11:24 PM
http://www.imagestation.com/picture/sraid217/p7e4646061d86583c8fa7c824268fc60a/ec6db0a5.jpg
who luvs d' cawk
http://www.imagestation.com/picture/sraid217/p8b916a1fb494e2c50b221d37d0085d74/ec6dad4c.jpg
this glues a bish to work with
http://www.imagestation.com/picture/sraid217/p3e1480f94914758c224050fad2ae0bbc/ec6dad44.jpg
http://www.imagestation.com/picture/sraid217/p699396ab6f56c4850dbff2b54bbfbd96/ec6dad3e.jpg
http://www.imagestation.com/picture/sraid217/p8a79819167ed34f01f27aa33ea4f9a99/ec6dad39.jpg

thats it for tonight, tomarrow ill cut the holes and caulk the backing, and run to home depot for the PVC

Chevyaudio
10-20-2006, 11:25 PM
Go easy with the sealant and glue...a wet rag is your friend.

PhatTonyDeMarco
10-20-2006, 11:26 PM
Looks good man. What do you plan to cover it with?

acold7dusta
10-20-2006, 11:27 PM
just some medium dark carpet to match the trunk

acold7dusta
10-20-2006, 11:28 PM
theres really not that much sealant on it, it looks like alot but it thins out to next to nothing