PDA

View Full Version : Avital 2100 wiring diagram



93 saturn sl2
10-18-2006, 10:09 PM
Anyone have a wiring diagram for the Avital 2100? I need to know which wires are for the power locks.

KaeZoo
10-18-2006, 10:22 PM
Generally, with Directed alarms, the lock wires are blue and green in a 3-pin plug. Blue is (-) unlock or (+) lock; green is (-) lock or (+) unlock.

93 saturn sl2
10-18-2006, 11:38 PM
ok so I looked at the module. It has the main connector, 1-2 prong to the left of it that has the led plugged in, an empty 2 prong to the left of that, and a 3 prong to the right of the main one that is empty.

KaeZoo
10-19-2006, 01:16 AM
The 3-pin plug is the lock/unlock. The green wire would go in the pin nearest the main harness, the blue wire would be in the far pin. The center pin is a 12v constant output that works with the Directed lock relay module.

The empty 2-pin plug is for the Valet switch.

Shyne151
10-19-2006, 02:06 PM
As KaeZoo said, the three pin is your lock harness. Usually you plug a 451m into it, then just ground out or send 12volts to the purple wire(whatever you need for your locks). You can pick them up cheap, or I could send you one if you want... i have a bunch in my box at work.

93 saturn sl2
10-19-2006, 03:31 PM
As KaeZoo said, the three pin is your lock harness. Usually you plug a 451m into it, then just ground out or send 12volts to the purple wire(whatever you need for your locks). You can pick them up cheap, or I could send you one if you want... i have a bunch in my box at work.

I was just about to ask about what harness I needed. I found them on ebay during school, but they wount allow me to log on. 99 cents on ebay plus $6 to ship.