PDA

View Full Version : Kenwood KDC-X817 is it broken?



Jimmy1541
10-09-2006, 01:43 AM
Hi,

I have a Kenwood KDC-X817. When I hooked it up the power wires (no other wires) and hit the reset button all that happens is: it turns on says Kenwood, then "code off", then "all off", then the face rolls up into the normal postion and screen goes black, then a few seconds later it rolls back to the insert a CD position.

Anyone know what's wrong with it, if anything?

Jimmy1541
10-11-2006, 01:25 AM
No one has any idea what can cause this problem :ponder: :titanic: :ohsnap:

drift1492
10-11-2006, 01:58 PM
Just try hooking everything else up and try again. Or put a cd in and see what happens.

Rich B
10-11-2006, 02:03 PM
Or put a cd in and see what happens.

A CD you dont care about.

Just in case it doesnt come back out again.

ty1er
10-17-2006, 05:03 PM
when it face flips toward you try hit the "select source" button.



Or put a cd in and see what happens.


A CD you dont care about.

Just in case it doesnt come back out again.
Have you tried the above?

scrappy
10-17-2006, 08:52 PM
Thats with the full 3d mask corect. If so then the ribbon cable is prpbaly bad. It happened to one of mine before they sell replacement cables if that is the problem