PDA

View Full Version : High powered amps rule



thylantyr
09-30-2006, 02:16 PM
:p:

Clean signal;
http://makewavs.com/samples/journey-c1-t_th.png

Clean signal with clipping;
http://makewavs.com/samples/journey-c1pm4.5-t_th.png

Notice the peaks are cut off.

People are mislead into thinking about amplifiers in terms of power
but a more important issue can be clipping headroom.

Your tweeter may only consume 2-3 watts of power, but a 2-3 watt amplifier
can easily chop off that signal. The side effect of the low powered amp is
the chopped waveform when you drive your speaker with low power.

The problem is solved if you raise the power supply voltage of the amplifer
design. The higher the voltage, the higher your clipping headroom is.

Lets say you made a higher voltage amplifier to give you higher clipping headroom, lets say it's a
+/- 130v design. That would be cool, most high powered home amps are +/- 90v, lowered powered amps
have much less voltage. This higher voltage design ensures clean transients.

The byproduct of your +/- 130v amplifier design is it's power rating. If you were
to design a good one, you would be testing this amplifier at over 3000 watts
in spite that you only wanted to drive your tweeters with no chance of clipping.

Your tweeter isn't consuming 3kw, but your tweeters loves the headroom as
you will rarely ever send a clipped transient to the tweeter.

If you want to be uber, bridge that amplifier and double your headroom and
he uber happy that you have crazy high clipping headroom. As you go down the driver
food chain, tweeter, midrange, woofer, sub, the clipping issue is easier to
manifest so you do need higher power as you walk down that chain of drivers.

This is just a common sense post, most people know this already.

joetama
09-30-2006, 08:20 PM
Or you could just buy and amp with plenty of headroom to start out with... ;)

thylantyr
10-01-2006, 12:16 AM
Clipping headroom is related to the voltage. So there is no such thing
as a high clipping headroom low powered amp.

JimJ
10-01-2006, 12:44 AM
Or you could increase loudspeaker efficiency :)

thylantyr
10-01-2006, 12:52 PM
My secret weapon, loudspeaker efficiency + high clipping headroom.

No reason not to have both. :)

JimJ
10-02-2006, 12:33 PM
No reason not to have both.

That depends :)