PDA

View Full Version : Request: Box plans for 4 10's ported



ultimate157
09-21-2006, 10:17 PM
Hey guys, I've never built a ported box, and I figured it would be easier, and sound better, if someone designed the plan for me.

What I'm going to be working with are 4 AA Assassin 10" woofers. Full t/s specs can be seen here:
http://ascendantaudio.com/assassin10specs.html

It says each one should be in 1.2cube. I'd like the tuning to be low, because this is a daily driver. Probably the recommended 32hz.

Vehicle: Jeep Cherokee (Space isnt really an issue ;))
Dimensions I have to work with are as follows: 42" wide, 24" deep, and 20" tall.

Double top baffle. Subs on top, port on top. Probably put the port in the center, somethin like this:

O || O
O || O

Thanks,
Matt F

Phreaker
09-22-2006, 12:44 AM
5ft^3 at 32Hz or a tad bigger.....


Here is a little plan I just drew up with paint...


http://img158.imageshack.us/img158/1184/52ft332hzwith84sqinofportarealg0.th.jpg (http://img158.imageshack.us/my.php?image=52ft332hzwith84sqinofportarealg0.jpg)

ultimate157
09-22-2006, 12:57 AM
5ft^3 at 32Hz or a tad bigger.....


Here is a little plan I just drew up with paint...


http://img158.imageshack.us/img158/1184/52ft332hzwith84sqinofportarealg0.th.jpg (http://img158.imageshack.us/my.php?image=52ft332hzwith84sqinofportarealg0.jpg)

Imageshack FTL. Won't load for me. Try photobucket. <3 them

Phreaker
09-22-2006, 01:04 AM
takes along time but basically

the box is....

Subs firing up port firing back at the hatch.

external measurements are 24.75" wide by 24.75" deep by 1' and 2/16th" tall.

Port is 21" long and 4" wide and the port wall is 20.25" long

Try this thumbnail
http://img226.imageshack.us/img226/7742/52ft332hzwith84sqinofportareamo0.th.jpg (http://img226.imageshack.us/my.php?image=52ft332hzwith84sqinofportareamo0.jpg)

ultimate157
09-22-2006, 01:30 AM
That would come out to be only 3 cube though, minus port volume?

Phreaker
09-22-2006, 02:00 AM
ooops...

internal measurements should be 25" wide x 24" deep x 18" tall after port displacement = 6.25ft^3 internal after port displacement.

External measurements should be 26.5" x 25.5" x 23.5"

can you work with an extra 3.5" in height?

phantom240
09-22-2006, 08:05 AM
Wide short ports FTL.
I might be able to draw soemthing up for ya, but what kind of area do we have to work with in here?

ultimate157
09-22-2006, 11:05 AM
Wide short ports FTL.
I might be able to draw soemthing up for ya, but what kind of area do we have to work with in here?

Looking at 42" wide, 24" deep, and 20" tall. 20" tall is just to the top of my rear seat. I would like to keep it under 20" tall because it'll start to interfere with my rear-view mirror. The footprint of 42x24 should be plenty to work with to keep it under 20" tall i should imagine...

Phreaker
09-22-2006, 04:12 PM
yeah.....you're going to end up with a way bigger box then you need if you use the 42" x 24" and you're going to need the port on the front wall at the bottom seeing as the size of the box and the subs you'll be using...

A 10" sub actually measures 10"-11" across from outside of one side to outside of other side so 4 10"s will need to take up a legth of anywhere from 40" to 44"

Try the box I designed...I guarantee you won't be dissapointed.

Make a few mods to it to make it 3.5" shorter so it doesn't come above the back seats...

But,it won't be that big a difference...3.5" over the backseat compared to someones head blocking the rearview mirror.

vetkilr
09-22-2006, 08:41 PM
pm iamamp3pimp.............

ultimate157
09-22-2006, 08:53 PM
pm iamamp3pimp.............

Already did, got a sick *** box print from him. :up2somet:

vetkilr
09-22-2006, 11:06 PM
Already did, got a sick *** box print from him. :up2somet:

I was wonderin if it was you that he was doin...........sweet.

4 10ssssssssss

sweet:D

ultimate157
09-23-2006, 12:16 AM
I was wonderin if it was you that he was doin...........sweet.

4 10ssssssssss

sweet:D

Its about time i put that lanzar to work. Run her at 1 ohms.

Snozzer
09-23-2006, 12:59 AM
Since im kinda in the same area i figure i wont need to make a new thread. Im getting 4 8" assassins. Can someone modify one of the boxes to fit 4 8"s? Was looking for around 2.4ft^3 and 35 Hz.

ultimate157
09-23-2006, 01:07 AM
Since im kinda in the same area i figure i wont need to make a new thread. Im getting 4 8" assassins. Can someone modify one of the boxes to fit 4 8"s? Was looking for around 2.4ft^3 and 35 Hz.

We need dimensions to work with here.

Snozzer
09-23-2006, 01:13 AM
Well iv got a 95 taurus so not the biggest trunk in the world. If i remeber correctly its 36" wide, 16" tall, and 24" deep. Ill double check tomorow morning to make sure their right.

ultimate157
09-23-2006, 01:57 AM
Just a little teaser for you guys:

http://i22.photobucket.com/albums/b342/Ultimate157/Box%20Pics/thmb.png

How loud do you think she'll be @ 1400w rms :)

Phreaker
09-23-2006, 02:08 AM
Sweet!

Like the design alot.

iamamp3pimp
09-23-2006, 05:38 AM
I came in here to post that very picture........



lol now im gonna have to post another


let me see what i can find


Bracing FTW

http://i35.photobucket.com/albums/d177/iamamp3pimp/Worklogs/Enclosures/Ultimate15702.png

EL-ORIGINAL
09-23-2006, 11:19 PM
does any one have the plans for these box so i can print

boomintahoe
09-23-2006, 11:23 PM
Hmm... 4 10's.... :)

ultimate157
09-23-2006, 11:37 PM
Hmm... 4 10's.... :)

If anyone is near me i'd be glad to meter it when done :D :up2somet: :veryhapp:

iamamp3pimp
09-23-2006, 11:47 PM
let me know how it does.

iamamp3pimp
09-23-2006, 11:48 PM
does any one have the plans for these box so i can print

I have them.

I made them.

ultimate157
09-24-2006, 12:07 AM
I have them.

I made them.

Cost me good moneys, for an EXCELLENT print.

iamamp3pimp
09-24-2006, 01:36 AM
Cost me good moneys, for an EXCELLENT print.

Thanks.

Wait until you build it.... I want to see pics

bluelceii
09-24-2006, 12:54 PM
Can I get a print for 4 assassin 12s? same vehicle basically. (99 Jeep Grand Cherokee)

JohnBlayz142
09-26-2006, 04:28 PM
let me get that plan, i want to do a 4 sub setup too.

i also have a grand cherokee WJ

iamamp3pimp
09-27-2006, 11:55 AM
pm me.