PDA

View Full Version : pioneer rev 6.5



nike
09-20-2006, 08:01 PM
is the orion 4004 enough for a pair of rev comps or should i go bigger, i already have the 4004

Raven
09-20-2006, 08:03 PM
Use what you got, if it's not enough to your ears, go bigger. Can't lose anything in the deal that way.

nike
09-20-2006, 10:16 PM
but i dont get my comps until monday so i wanto to know if thats is going to be enough for them, cause i heard they need a lo of power to sound right.

DejaWiz
09-21-2006, 12:49 AM
You can always bridge it (200w rms x 2 @ 4 ohms) and be very careful with the gain settings.

kicker06
09-21-2006, 12:46 PM
You can always bridge it (200w rms x 2 @ 4 ohms) and be very careful with the gain settings.

I probably wouldn't do that on those speakers.

nike
09-21-2006, 08:24 PM
I probably wouldn't do that on those speakers.

then what do u recommend, what should i do

DejaWiz
09-21-2006, 09:05 PM
then what do u recommend, what should i do

Give it a try in 4 CH mode, if it's insufficient to your liking, bridge the amp to 2 CH mode (be very careful with those gains!). If you don't want to do bridged, then you'll have to get a different amp that is more matched to the speakers.

nike
09-21-2006, 09:31 PM
what other amp do u recommend?, and how much power should i give them? have u seen a system with this comps, if so what where they using to power them?

asaner85
09-21-2006, 10:12 PM
Whats the rms on that amp? Im giving mine 75W X4 rms with my HU volume maxed out and no distortion.

First I had them with 35W then 50W, but with 75W they really come alive. They dont sound GREAT, but they do sound really good with most music.

GL!

nike
09-21-2006, 10:29 PM
4x50@4 ohms
4x100@2 ohms
2x200@ 40hms