PDA

View Full Version : Baseballer's worklog....56k No chance



baseballer1100
09-15-2006, 09:15 PM
This is For 2 12 FI ssds. Its tuned to 37 hz and right at 5 cubes.....
Straight cuts?
http://img144.imageshack.us/img144/3127/cimg0687xv6.jpg
Close I guess
http://img134.imageshack.us/img134/8986/cimg0688ew7.jpg
The shop.
http://img134.imageshack.us/img134/7950/cimg0689dk3.jpg
The saw.
http://img137.imageshack.us/img137/5052/cimg0690oe3.jpg
http://img134.imageshack.us/img134/6623/cimg0691up8.jpg
Some wood
http://img134.imageshack.us/img134/6623/cimg0691up8.jpg
The port...These clamps are sweet. The best buy i have had on ebay so Far
http://img137.imageshack.us/img137/75/cimg0692ed9.jpg
One side.
http://img137.imageshack.us/img137/5774/cimg0693bh1.jpg
Two sides
http://img137.imageshack.us/img137/5774/cimg0693bh1.jpg
More continued on the next post..

baseballer1100
09-15-2006, 09:20 PM
All the sides.
http://img245.imageshack.us/img245/2522/cimg0695vd4.jpg
another shot all sides...
http://img92.imageshack.us/img92/6533/cimg0697zo7.jpg
My hald *** rounding job
http://img172.imageshack.us/img172/7417/cimg0698uv4.jpg
http://img92.imageshack.us/img92/6774/cimg0699pm8.jpg
http://img171.imageshack.us/img171/9143/cimg0700sb0.jpg

Slo_Ride
09-15-2006, 09:25 PM
Looks good so far, I got pics of a build coming tomorrow. Is this at you house or work?

baseballer1100
09-15-2006, 09:27 PM
Ill get the the 1st post working ****it...
Brad Nailer FTW
http://img168.imageshack.us/img168/483/cimg0703yk2.jpg
or FTL?
http://img168.imageshack.us/img168/9642/cimg0704av0.jpg
Some more o the port...
http://img88.imageshack.us/img88/6591/cimg0706ot8.jpg
1st time using a jasper jig..Any suggestions?
http://img80.imageshack.us/img80/6333/cimg0710jt7.jpg
Just need to cut the holes!!
http://img174.imageshack.us/img174/2222/cimg0711se4.jpg
Will have more pics up tommorow.

baseballer1100
09-15-2006, 09:28 PM
lookin nice so far. way to hold the wood on the blade.

What?

cd6551
09-15-2006, 09:29 PM
lookin good, cant wait to hear them next saturday

NeverEnuffBass
09-15-2006, 09:33 PM
Very nice shop ya got there.

cd6551
09-15-2006, 09:34 PM
i agree not fair

Slo_Ride
09-15-2006, 09:34 PM
those big ol black scorch marks on the wood ;)

I'm just givin ya a hard time. It looks good.

kickback FTL

baseballer1100
09-15-2006, 09:35 PM
Looks good so far, I got pics of a build coming tomorrow. Is this at you house or work?

This is actually my Grandpas shop and he doesnt use it anymore so. Yeah.

cd6551
09-15-2006, 09:37 PM
whats goin to be powerin the subs?

baseballer1100
09-15-2006, 09:39 PM
merlin md2

cd6551
09-15-2006, 09:41 PM
good choice

baseballer1100
09-15-2006, 09:50 PM
It seems to be doing great right now. THe box i have now is like 4.5 cubes tuned to 33 and it is loud

PV Audio
09-15-2006, 09:50 PM
Just read the directions on the jasper, calibrate it for your router, and it's as easy as using a 4th grade compass.

PV Audio
09-15-2006, 09:50 PM
And I assume this means you don't want a design :(

baseballer1100
09-15-2006, 09:54 PM
those big ol black scorch marks on the wood ;)

I'm just givin ya a hard time. It looks good.
O no i **** at cutting well the phencing ***** needs to be adjusted but yeah i know. lol


Very nice shop ya got there.
Yeah its a long story but its gotten tons oph use and still does


i agree not fair
haha

kickback FTL
I almost died twice when cuttin big sheets. Now i use a little saw to cut to a more managable length

And I assume this means you don't want a design :(
Are you kidding. I got bored this apternoon and just went out and did this i still want it.:D

Just read the directions on the jasper, calibrate it for your router, and it's as easy as using a 4th grade compass.
What iph you have never used a router?

And phor all those wondering why i use ph...The f key on my laptop went out phor some gay reason.

Slo_Ride
09-15-2006, 09:55 PM
holy multiple quotes

baseballer1100
09-15-2006, 09:55 PM
holy multiple quotes

yeah lol the new multiple quote thing is really nice;)

cd6551
09-15-2006, 10:01 PM
are you leavin her ****?

bjfish11
09-15-2006, 10:02 PM
And phor all those wondering why i use ph...The f key on my laptop went out phor some gay reason.

I was reading along and was starting to think you were drunk.
Alcohol + Power tools = FTMFL

Anywho, looks good so far. How will you be finishing it?

baseballer1100
09-15-2006, 10:10 PM
are you leavin her ****?
Maybe

I was reading along and was starting to think you were drunk.
Alcohol + Power tools = FTMFL

Anywho, looks good so far. How will you be finishing it?

Haha...I dont know iph i was better with a router i would ahve done whats in your should be a sticky thread but i'm not so maybe paint? I dunno i have a paint booth guns etc...so i might go that route or maybe **** havent decided...But this isnt going to be my main box the one pv is designing is:D

PV Audio
09-15-2006, 10:12 PM
Using a router isn't hard if you have steady hands or a router table.

bjfish11
09-15-2006, 10:13 PM
Haha...I dont know iph i was better with a router i would ahve done whats in your should be a sticky thread but i'm not so maybe paint? I dunno i have a paint booth guns etc...so i might go that route or maybe **** havent decided...But this isnt going to be my main box the one pv is designing is:D

Man routers are very easy to learn how to use. Especially if your just making the box cause your bored. With the equipment it looks like you have, it should be fairly easy for you. Just take your time, think everything through, and give it a shot. Especially if you think you may ever want to carpet your box. If you have any questions, you can always pm me.

bjfish11
09-15-2006, 10:13 PM
Not only for carpeting, but I think it makes the box 10x easier to put together anyway, guaranteed to be squared, if you have good cuts.

baseballer1100
09-15-2006, 10:17 PM
Using a router isn't hard if you have steady hands or a router table.
I have a router table just been kinda scared to use it...THey look craszy:blackeye:


Man routers are very easy to learn how to use. Especially if your just making the box cause your bored. With the equipment it looks like you have, it should be fairly easy for you. Just take your time, think everything through, and give it a shot. Especially if you think you may ever want to carpet your box. If you have any questions, you can always pm me.

I will phor sure. I guess ill try it out tommorow with the jasper jig.

baseballer1100
09-15-2006, 10:19 PM
Not only for carpeting, but I think it makes the box 10x easier to put together anyway, guaranteed to be squared, if you have good cuts.

Im working on the good cuts lol. The router i have is the http://www.epinions.com/hmgd-Shop_Tools-All-Bosch_2_hp_Electronic_Variable_Speed_Plunge_Router bosch plunge router how is that? and what bits should i get and use?

phyphoestilic
09-15-2006, 10:21 PM
dang everything looks so perfesiional. Good work

bjfish11
09-15-2006, 10:23 PM
Router looks pretty decent.
As far as bits, all i have is a round over bit, a straight cutting bit, and a rabbit bit. I also have a flush trim bit, but its not necessary at all.
How many hp is that router I didnt see it?
Nevermind, its in the title.

baseballer1100
09-15-2006, 10:25 PM
Router looks pretty decent.
As far as bits, all i have is a round over bit, a straight cutting bit, and a rabbit bit. I also have a flush trim bit, but its not necessary at all.
How many hp is that router I didnt see it?
Nevermind, its in the title.

Ok i think all that is there. Straight cutting bit work good with the jasper jig or spiral upcut better? I have heard both but yeah.

bjfish11
09-15-2006, 10:27 PM
I have heard the spiral is pretty good. But I believe the jasper is calibrated for a 1/8" straight cut bit (maybe 1/4") and i dont know how thick the spirals are, but i always just use a straight cut. Always does fine for me, just have to but new bits every so often.

PV Audio
09-15-2006, 10:28 PM
Senor pescado is right. I use a BOSCH straight 1/4 bit with my jasper. Works flawlessly.

bjfish11
09-15-2006, 10:30 PM
Yea i just looked at homedepots website, i must use a 1/4" straight bit, they have a 1/4" spiral I may see if I can get where I work, give it a try and see how it goes.

Senor pescado?????














You're crazy man, you're crazy.

ssj2xxgotenxx
09-15-2006, 11:31 PM
Those are really nice right angle clamps.

IonSQL
09-15-2006, 11:41 PM
Lookin' good man.... I'm jealous of the shop!

dleccord
09-15-2006, 11:47 PM
man i thought you were in my school for a minute there. all shops look similar:)

stuckinok
09-15-2006, 11:54 PM
Very nice shop and work! I would make a wooden bench with some sub enclosures on it next

PowerNaudio
09-15-2006, 11:57 PM
looking good on the build man. you got skills and a bad a$$ shop there.

baseballer1100
09-16-2006, 11:04 AM
Senor pescado is right. I use a BOSCH straight 1/4 bit with my jasper. Works flawlessly.
Ok ill get that so its really not that hard to use?

Yea i just looked at homedepots website, i must use a 1/4" straight bit, they have a 1/4" spiral I may see if I can get where I work, give it a try and see how it goes.

Senor pescado?????














You're crazy man, you're crazy.
I guess ill go get some of those then or at least one:yumyum:

Those are really nice right angle clamps.
got them on egay for 20 dollars shipped on all four.

Lookin' good man.... I'm jealous of the shop!
thanks

man i thought you were in my school for a minute there. all shops look similar:)
haha

Very nice shop and work! I would make a wooden bench with some sub enclosures on it next
Huh?

looking good on the build man. you got skills and a bad a$$ shop there.

thanks i try.. haha

Lckmyblls
09-16-2006, 11:07 AM
looking good on the build man. you got skills and a bad a$$ shop there.

x2 :yumyum:

baseballer1100
09-16-2006, 11:10 AM
Thanks man lckmyblls where you at in kentucky?

djman37
09-16-2006, 12:14 PM
That shop makes me jealous. Instead of hand rounding, use a round-over bit on a table router or a hand router.
Probably a GOOD thing you practiced making a box first, you can only get better. (no burns, router rounded edges, etc.)

Good work and keep it up!

baseballer1100
09-16-2006, 12:33 PM
Thanks man...Yeah i mean hell it took me all o 2 hours to do so i mean..But yeah using a router makes everything seem so much easier

PV Audio
09-16-2006, 01:02 PM
Senor pescado?????

You're crazy man, you're crazy.

:laugh: I needed something new.

ballstothewall
09-17-2006, 11:46 AM
Nice lookin shop, but get a good fence on that table saw.

baseballer1100
09-17-2006, 12:05 PM
Nice lookin shop, but get a good fence on that table saw.

Tell me about it. It makes the cuts burn like that and not straight....well they are straight but could be straighter have any suggestions on where to get one?

PV Audio
09-17-2006, 12:37 PM
Lowes my man. Get that 300 dollar hitachi. Best investment ever.

ultimate157
09-17-2006, 12:44 PM
Lowes my man. Get that 300 dollar hitachi. Best investment ever.

Hitachi makes some good stuff. I got the 18v professional quality drill. 5 year warranty. Works like a champ, never let me down once.

http://i22.photobucket.com/albums/b342/Ultimate157/Box%20Pics/BoxSides.jpg

baseballer1100
09-17-2006, 03:31 PM
Hitachi table saw?...I dont need a new table saw just some new phencing.

baseballer1100
09-17-2006, 03:38 PM
At last the phinal pics!!
The jasper jig is the best thing that has ever happend to me.
http://img339.imageshack.us/img339/711/cimg07121jy7.jpg
These perphect circles make me happy.
http://img339.imageshack.us/img339/4494/cimg07131ys2.jpg
Absolute Mess.
http://img467.imageshack.us/img467/6697/cimg07191bq6.jpg
Waiting or the Caulk!!!
http://img178.imageshack.us/img178/7676/cimg07151vi7.jpg
Im not sure iph im going to paint or carpet it probably neither but we will see.

Calikid
09-18-2006, 12:40 AM
sweet circles.:yumyum:

baseballer1100
09-18-2006, 12:42 AM
I know they make me want to go out and cut a bnch o circles.

PowerNaudio
09-18-2006, 09:44 AM
looks very very nice. now go put some subs inthere and make them go thump. and take video if you can. lol
laters

baseballer1100
09-18-2006, 06:27 PM
alright alright.

Slowd N Throwd
09-18-2006, 06:34 PM
nice build

video?

CJL
09-18-2006, 06:38 PM
what made you go from a 33 to 37hz tuning?

ssj2xxgotenxx
09-18-2006, 07:04 PM
$20.00 bucks for 4 clamps?!?! Egay isn't so gay after all.

iamamp3pimp
09-18-2006, 09:00 PM
lookin good bro. Lookin real good

mazdakid
09-18-2006, 09:18 PM
go make a bunch of circles, then start selling wooden round ports

baseballer1100
09-18-2006, 09:26 PM
what made you go from a 33 to 37hz tuning?

I got bored and wanted to build a "SPL" box

$20.00 bucks for 4 clamps?!?! Egay isn't so gay after all.
yeah i know. haha i was like ok

lookin good bro. Lookin real good

thanks.

baseballer1100
09-18-2006, 09:27 PM
go make a bunch of circles, then start selling wooden round ports

I seriously might i cut those circles with the jasper jig and was like ooooo and then i got a boner and then i lost it cause i was done cutting circles.

smd4life
09-18-2006, 09:36 PM
so it there no f key on your keyboard?

baseballer1100
09-18-2006, 09:40 PM
No there is it just stopped working? and so did the number phour

iamamp3pimp
09-18-2006, 10:08 PM
and as fat as the clamps are concerned i found 2 for 4.51 shipped


pennyauctions FTW

mazdakid
09-18-2006, 10:35 PM
how much for an 11" port thats 24" long?

baseballer1100
09-18-2006, 10:42 PM
Lol i would rather build boxes i really like doing this.

smd4life
09-19-2006, 12:16 AM
No there is it just stopped working? and so did the number phour

the number what???

baseballer1100
09-19-2006, 12:17 AM
The number aphter 3 it just randomly went out.

smd4life
09-19-2006, 12:17 AM
aphter...what????

baseballer1100
09-19-2006, 12:18 AM
The number 3

baseballer1100
09-19-2006, 12:18 AM
I want to build some more boxes!!!

smd4life
09-19-2006, 12:19 AM
wtph?

baseballer1100
09-19-2006, 12:21 AM
Dont worry about it. lol

smd4life
09-19-2006, 12:26 AM
im just phucking with you.lol

baseballer1100
09-19-2006, 12:36 AM
haha i know i know.

iamamp3pimp
09-19-2006, 06:47 AM
box building is fun once you get good at it.

do what i did

take some pics, put em in an album, and take it to a local stereo shop.

see what they got for you

baseballer1100
09-19-2006, 05:35 PM
hmm not a bad idea.

PV Audio
10-03-2006, 08:37 PM
box building is fun once you get good at it.

do what i did

take some pics, put em in an album, and take it to a local stereo shop.

see what they got for you
:laugh: I was using Rhinoceros a few weeks to a month ago for a fiberglass enclosure for this local kid's G35, and I took the design to an audio shop (I do NOT FG in anyone's car) and they didn't believe that I made it :mad: