View Full Version : Driver side comp. clean passenger, sounds mono
09-15-2006, 09:17 AM
Hey i jus got finsihed installing my rainbows and amping them with a 300/4, i have a loc tapped into both rear speakers in the back and have y-connectors rcas going into the 300/4 however, my passenger side sounds so mono compared to the driver side, and the tweeter isnt even working, everything else seems fine. i checked the C.o wires to, thats fine, i dont know..
09-15-2006, 09:32 AM
Please anyone, im working on it now, the passenger side tweeter isnt even playing
09-15-2006, 09:40 AM
if it helps i have determined that my whole right side sounds mono
09-15-2006, 07:48 PM
What do you mean by the side sounds "mono" ?
Have you tried switching the crossovers to see if the problem follows the crossover or stays consistent on the right side ?
Have you tried switching the speakers (but not the crossover) to see if the problem follows the spekers or stays consistent on the right side ?
Those two tests will tell you if the problem is the crossovers, the speakers, or upstream somewhere (the amplifier, the wiring, the LOC, etc).
If it sounds "mono", you'd only be hearing one side?