PDA

View Full Version : Truck = No Room:(



badandyturbo
09-14-2006, 10:07 AM
I have a 2003 Ford F150 SuperCrew. It has zero space behind the back seat and I don't want to do a blow threw b/c I don't want to hack up the cab. Do you guys have any suggestions.

badandyturbo
09-14-2006, 10:12 AM
The back seat literaly rests against the back wall of the cab. I may just have to remove it completely.

badandyturbo
09-14-2006, 10:18 AM
Haha I know I had removed the entire seat in my last truck and ran that sealed box with the 4 12" MMATS. But now I want the bass and my back seat....Maybe I will do a blow threw, the bed is alreag hacked up from the air bags.

acold7dusta
09-14-2006, 10:26 AM
take out one of the sections of seats back there, and put the box there so youll have 1-2 people to sit back there, and the box will be on the left, middle, or right

badandyturbo
09-14-2006, 10:30 AM
Yeah I guess the back bench is a 60/40 split. I could remove the 40% and put the box there....Now to get rid of my 4 12's for 1 15"....

audiobahnuser18
09-14-2006, 10:36 AM
do something where u can make an enclosure maybe a small 8 or 12 if you could fit it. fit that into a panel

ultimate157
09-14-2006, 11:05 AM
Yeah I guess the back bench is a 60/40 split. I could remove the 40% and put the box there....Now to get rid of my 4 12's for 1 15"....

That sounds like a great plan right there. I'd love to see pics of it when you're finished.


do something where u can make an enclosure maybe a small 8 or 12 if you could fit it. fit that into a panel

...What?

fox_forma
09-14-2006, 02:25 PM
what about something like this? Its not a big system but should be ok
http://www.subbox.net/store/product_image.php?imageid=3

GrnEydDvl
09-14-2006, 02:31 PM
There is a seat lift kit for our trucks and I plan to use that. Made by LMI Welding IIRC. Raises the rear seat by about 2 inches.

Brypink is a user here has the seat lift kit. He has a 2005 supercrew and squeezed two SI Mag's under his seat in a downfiring box. About 2.25 cuft total to work with.

I am also considering removing the 40% seat for a box. Still scheming but I am leaning towards the seat lift kit route.

Edit: Just saw yours is a 2003. I know they make a seat lift kit for it as well. Do not know how high it lifts or how much room is exactly under the seat after the lift.

badandyturbo
09-14-2006, 02:37 PM
Is that exactly how your seat is?
Almost. My seat sits lower b/c its a four door. I will take some pics later to show you what I am talking about.

springy101
09-14-2006, 02:46 PM
i think your best bet would be to raise the seat and put a box underneath and try to fit 2 10's down there.

GrnEydDvl
09-14-2006, 02:50 PM
http://www.supercrewsound.com/shop/cat/60.htm More options / ideas. These are without a seat lift. They do not make boxes for seat lifted trucks.

rocky 59
09-14-2006, 02:54 PM
look at the focal 5'' subs and see if you do them back there or something of that nature. you can always do a center console box and sub :D

badandyturbo
09-14-2006, 02:57 PM
http://www.supercrewsound.com/shop/cat/60.htm More options / ideas. These are without a seat lift. They do not make boxes for seat lifted trucks.

Thanks for the link. It gives me some ideas. I could also move the seat foward. Do you guys know any examples of blow threws other than that XXX chevy?

mikey060
09-14-2006, 03:10 PM
x2 on doing a center console...that would be sweet. 4 8's? 2 10's? who knows

mikey060
09-14-2006, 03:11 PM
Thanks for the link. It gives me some ideas. I could also move the seat foward. Do you guys know any examples of blow threws other than that XXX chevy?

i have a pic from the show i was at on the weekend

mikey060
09-14-2006, 03:13 PM
http://img365.imageshack.us/img365/9127/img1148zx1.jpg (http://imageshack.us)

Railrocker
09-14-2006, 03:18 PM
If you move the seat forward and remove the center portion of the seat you could do something like this. This box goes the entire length of the cab in a standard cab.

badandyturbo
09-14-2006, 03:24 PM
Thats cool accept I don't have captains chairs. I have a 60/40 bench. But I could swap the interior for 4 chairs and do a center consule.

mazdakid
09-14-2006, 05:44 PM
http://img365.imageshack.us/img365/9127/img1148zx1.jpg (http://imageshack.us)

was it loud?

squeak12
09-14-2006, 06:18 PM
Id get another 40 seat from a supercrew and make a center console.

Railrocker
09-14-2006, 06:19 PM
Thats cool accept I don't have captains chairs. I have a 60/40 bench. But I could swap the interior for 4 chairs and do a center consule.

That was a 60/40 bench I just removed the center.