PDA

View Full Version : Viper 560xv help



ace_800
09-13-2006, 05:45 PM
I had this installed about 2 years ago with no problems, now the alarm will not chirp when arming or unarming. I can get the alarm to go off and nothing else is wrong with it, ie.. lights still flash when arming/unarming, etc. Does anyone know what could be wrong with it. I can't take it back to where I had it installed because I moved, being military, out of the state and the shop is not where I am at now.

KaeZoo
09-13-2006, 09:17 PM
Sounds like it's in Valet mode. If so, the LED light should be lit all the time.

To remove the system from Valet mode, open a door, put the key in the ignition, switch the key to "run" then off again, and push the valet switch (black pushbutton). The LED light should then go out, and everything should start working normally again.