PDA

View Full Version : can someone help me please



Fattony911
09-10-2006, 04:44 PM
Dual 2 ohm voice coil
Die cast aluminum
Metal-flake Royal Blue Finish With Diamond Cut
Non-pressed paper cone
Chrome finish front & back plate
Large foam rubber surround
1-piece rubber gasket
Black spider
Woven tinsel lead through spider
Chrome screw terminals
2000 watts power handling
800 Watts RMS
200 oz. magnet size
2.5” ASV voice coil
SPL 93 dB
FS: 29.1 Hz
VAS: 4.73cu.ft.
QMS: 3.83
QES: 0.457
QTS: 0.4986
XMAX: 0.6"
Sealed box: 2 cu. Ft.
Ported box: 3 cu.. Ft.
Tuning: 35 Hz
Port Size: 4”x6.25”(diameter x length)
# of ports:1

which one of these is driver displacement????????? please help

JimJ
09-10-2006, 04:47 PM
If you mean cone displacement (swept area), you need to multiply Xmax & Sd (surface area), which you're not given.

Vas is the closest number to what you're looking for, but that's not really the right way to go about it :)

Fattony911
09-10-2006, 04:50 PM
If you mean cone displacement (swept area), you need to multiply Xmax & Sd (surface area), which you're not given.

Vas is the closest number to what you're looking for, but that's not really the right way to go about it :)

ehhh that'll do thanks lol

ramos
09-11-2006, 11:49 AM
If you mean cone displacement (swept area), you need to multiply Xmax & Sd (surface area), which you're not given.

Vas is the closest number to what you're looking for, but that's not really the right way to go about it :)



Huh ? I think he means basket displacement which isn't listed either :)

JimJ
09-11-2006, 11:51 AM
Probably could be, "displacement" is such a vague term...

nVRuckus
09-11-2006, 12:00 PM
If you mean cone displacement (swept area), you need to multiply Xmax & Sd (surface area), which you're not given.

Vas is the closest number to what you're looking for, but that's not really the right way to go about it :)

I thought he ment displacement in the box. which is not listed

Fattony911
09-11-2006, 05:52 PM
on subwoofertools.com the ported box calculater it asks for "Driver Displacement" im not sure either thats why i asked.