View Full Version : Need box desiner box spl box

09-07-2006, 04:58 PM
im in need of a spl box for my SX's immediatly, i want it tuned to about 38hz single chamber for two SX 12's 2 ohm, i want to achieve the highest numbers possible off 3000 watts, help me out please

09-07-2006, 04:59 PM
yea i know i fawked up the title but i was in a rush

09-07-2006, 05:01 PM
PM 80, he can do some nice work with bandpass..:)

09-07-2006, 05:02 PM

09-07-2006, 05:02 PM
u know who to PM...

09-07-2006, 05:11 PM
will aero ports work better for spl or just slot port

09-07-2006, 06:19 PM
what are your max dimensions? i'm guessing about 32"W x 14"H x 24"D (maybe a little deeper), since you have an accord, and so do i :)

if you like aeroports and wouldn't mind tuning a bit higher, i was thinking of this:

32"W x 14"H x 23"D
with four of these:

leave them the full 17" and you'll end up with ~4ft^3 (total, after displacement) tuned to somewhere around 42Hz.

i really want to try that box in my accord (with my dual 12's), just to see what it can do with a higher tuned box (current one is tuned to 32Hz).

if you want a slot pot (cheaper) i can help you out with that too.

09-07-2006, 07:05 PM
if u want high spl from those subs in a accord....u not going to believe this...lol

1.8 cubes shared ported tuned to 45hz with 3 6inch ports or 1 8 inch port

or if u can do a realy peaky 6th order....with 6 4inch round ports that will be nutz

ooops i'm over here leaking ideas...let me shut up...lol
ii got your pm..i will mix something up either 2nite or 2morrow